Offer of a new Machine in section steel shears
: neu
: ca. 10 Wochen ab Auftrags
: Spanien
: 24100 €
: 1000 mm
: 400 mm
: 12 m/min
: 0,2 mm
: 0,1 mm
: 300 kg
The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat.
THE ASSEMBLY CONSISTS OF:
* Mounting plate.
* Table assembly with “X” and “Y” axis driven by servo motors.
* B&R Power Panel 500 PC based 15” touch screen control
* Each axis “X” and “Y” has servo motors with built encoder for precise measurement.
* Electric cabinet
THE WORK PROCESS IS AS FOLLOWS:
* The position of the holes to be punched is programmed either in absolute or incremental dimensions.
* When the control is started up, the guide stops are positioned for first hole.
* The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles.
* After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position.
* Repeat this sequence until all holes are punched.
B&R PC BASED 15” TOUCH SCREEN CONTROL MAIN FEATURES:
*
* B&R Power Panel 500
* Integrated keyboard
* Windows embedded operating system
* 15” colour touch screen WXGA resolution
* Compact Flash Memory.
* USB front port
* Ethernet port
* Easy and user friendly interface
* Programming is made through Line Pro software developed by Geka
* Importing of dxf/dstv files
* Network connectivity
* Remote assistance via the internet
* Run, design, jog, configuration and alarm modes
ELECTRIC CABINET
* Electric cabinet containing power and control equipment for the axis positioning and control of the machine
* Includes Allen-Bradley Guarmaster® safety relays
* Electric cabinet is mounted inside Hydracrop’s or Puma’s frame. If machine is retrofitted, the electric cabinet is mounted out of the machine’s frame.
* Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know
LINE PRO MAIN FEATURES:
* It is a visual and a very easy to use application with graphic representations.
* It shows the operator the image of the piece that is being designed.
* All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control.
* Importing of dxf and dstv files available according to designing
specifications of the software.
* It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part.
* Line Pro can be installed in a PC for later on sending the file via the network
or with a USB stick to the machine
*
Other X- and Y- ranges are also available, please ask for an offer.
<small>The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.</small>
Subject to alterations and errors in the technical datas, specifications and pricing and subject to prior sale.
Short Link to this page: https://www.blechzulieferer.com/67735/offer
Vendor
HESSE+CO Maschinenfabrik GmbH
Industriezentrum NÖ-Süd, Straße 4 Objekt 8
2351 Wiener Neudorf
(Austria)
Phone: +432236-63870
Telefax: +432236-63662