Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Plasma-/ flame jet cutting machines (46 Offers)

RSS
Order by:
  • used, Good | Inv. Num.: 5145 | Type: MG 6001.20 PrkB + CH1 200P | Producer: Microstep | Generated: 2018 | Parameters: | Working table length: 6000 mm | Working table width: 2000 mm | Furnishing: | Head 3D | Drilling and tapping arm » more

    Manufactured
    2018
    Price
  • new | Working area: 1,500 x 3,000 mm | Amperage: 30 - 130 A | Length:. 4,650 approx. Mm | Width:. 4,300 ca mm | Height: . 1,920 approx. Mm | Weight: 5,100 ~ kg » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 5344 | MAKE Messer Griesheim Germany | TYPE THERMOCUT eco 3000 | YOP 2013 | SPECIFICATIONS | Working area X Axis 14000 mm | Working area Y Axis 3000 mm | Working area Z axis 500 mm | Power resonator 260 kW / ... » more

    Manufactured
    2013
    Price
  • used | Cutting thickness: 10 mm | Setting: 2 steps 20 A + 40 A | Cutting voltage 110 V + 125 V | Open circuit voltage: 265 V | Supply voltage: 220/380 V | Primary current: 10/30 A | Compressed air consumption: 6 bar | External dimensions: | Width 420 mm | Depth 600 mm | Height 900 mm | Weight: 50 kg » more

    Manufactured
    Price
  • used, Very good Condition | Make HPM Plasma | Type GV 4000 x 2000 | Year 2007 / 700 H | Touchscreen | X = 4.000 | Y = 2.000 | Hypertherm 130 Amp | Height = 110 mm 4.000 m3 collector TOP !! | www.mach4metal.com » more

    Manufactured
    2007
    Price
  • new | Cutting range for steel up to: 20.0 Cutting mm | Cutting range for steel up to: 15.0 Quality cut mm | Power at 100% ED: 60A | Cutting medium: compressed air | Air consumption: 160 lt / min. at 5 bar l / min. | Dimension L-B-H: 480 x 540 x 920 mm | Weight: 75 kg » more

    Manufactured
    Price
  • used | Stepless power: 20-55 Amp | Consumption at 50% duty cycle at 55 A | Power at 100% duty cycle at 39 A | Gas consumption: 170 l / min. | Gas pressure: 6.2 bar | Weight: 33 kg | External dimensions: 590 x 260 x 500 mm | With: | - Burner | - Ground wire » more

    Manufactured
    1998
    Price
  • used | Table width: 3000 mm | Table length: 12000 mm | Burner heads: | Control: iMSNC Windows | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    2016
    Price
  • demonstration machine, Workshop-tested, very well including UVV workshop test report » more

    Manufactured
    Price
    5.290 EUR
  • used | - Air-cooled plasma cutting machine, mobile | - Cutting current in 2 steps adjustable from 45 to 85 A / 60% ED | - Duty 45 A / 100% ED | - Max cutting thickness - steel about 1.5 to 25 mm | - Aluminium 20 mm | - Stainless steel 15 mm | - Cutting gas compressed air / compressed air | - Air ... » more

    Manufactured
    1994
    Price
  • used, in good condition | Welding current: 30 A | Welding voltage: 100 V | Open circuit voltage: 350 V | Supply voltage: 380 V | Price on request. | Sincerely yours | Mike Waldeck | WAHO GmbH | Mobile: +49 (0) 151/15679203 » more

    Manufactured
    Price
  • used, Sehr gut erhalten, Very good Condition | Make Koike Aronson | Type MONOGRAPH - Millenium | Year 2010 | KAR - CNC | X = 3.000 | Y = 1.500 | Hypertherm 100 AMP POWERMAX | * Dust collector * DXF conversion * Cutting up to 16 mm | www.mach4metal.com » more

    Manufactured
    2010
    Price
  • used, in good condition | Track width: 2600 mm | Working width = Boom length: 2000 mm | Rail length: 9 m | Number of Burners: 6 | Cutting speed: 50 - 3000 mm / min | max. Workpiece thickness: 3-200 mm | Power consumption: 1.5 kVA | Price on request. | Sincerely yours | Mike Waldeck | WAHO GmbH | Mobile: +49 (0) ... » more

    Manufactured
    1989
    Price
  • new | Working area: 1,250 x 2,500 mm | Bridge passage: 120 mm | Piercing power: 12 mm | Separating cut: 25 mm | recommended thickness (unalloyed steel): 4 mm | Max. Thickness (unalloyed steel): 6 mm | Repeat accuracy: 1/10 under mm | Volume of water tub:. 470 ca l | Length: 3,060 mm | Width: 1,760 ... » more

    Manufactured
    Price
  • used | Running distance: 4000 mm | Running length: 9000 mm | Cutting thickness Plasma Alu: 90 mm | Cutting thickness of alloy steel: 90 mm | Welding thickness of unalloyed steel: 40 mm | Oxygen / acetylene to: 100 mm | With | - CNC control KS 20 B / BF graphic | - Plasma source Hypertherm / ... » more

    Manufactured
    1988
    Price
  • used | - Air-cooled plasma cutting machine, mobile | - Cutting power in 2 steps adjustable 32 + 50 A | - Duty 30 A / 100% ED | 50 A / 35% ED | - Max cutting thickness - steel 10 - 15 mm | - Alu 15 mm | - Stainless steel 10 mm | - Cutting gas compressed air / compressed air | - Air connection 6 bar | ... » more

    Manufactured
    1993
    Price
  • used, workshop-tested, very good, including UVV test protocol | Of machine plasma cutting machine | Make Röwac | Type Plasma Cut 120 LL | Supply voltage 3 x 400 volts | Adjustment range 70 - 120 amperes | Duty cycle 35% duty cycle at 120 amps | 60% ED at 90 amps | 100% ED at 70 amps | Current setting 3 switching stages | Max. Separating cut 25 mm | Max. ... » more

    Manufactured
    1990
    Price
    550 EUR
  • new | Working area: 1,500 x 3,000 mm | Bridge passage: 120 mm | Piercing power: 12 mm | Separating cut: 25 mm | recommended thickness (unalloyed steel): 4 mm | Max. Thickness (unalloyed steel): 6 mm | Repeat accuracy: 1/10 under mm | Volume of water tub:. 630 ca | Length: 3,560 mm | Width: 1,960 mm ... » more

    Manufactured
    Price
  • new | Cutting range for steel up to: 4.0 Cutting cut mm | Cutting range for steel up to: 6.0 Quality cut mm | Cutting medium: compressed air | Power at 100% ED: 7 - 25 continuously A | Air consumption: 45 lt / min. at 5 bar l / min. | Dimension L-B-H: 425 x 210 x 390 mm | Weight: 17 kg » more

    Manufactured
    Price
  • demonstration machine | Power: 26/18 A | Power Rating: 55 A at 100 V | With: | - Brenner | - Hosepack » more

    Manufactured
    Price
  • used, in good condition | Track width: 6500 mm | Track length: 12,000 mm | Cutting table height: 700 mm | Number of burners: 6 Autogen | Type of control: CNC 510 | Price on request. | Best regards | Mike Waldeck | WAHO GmbH | Mobile: +49 (0) 151/15679203 » more

    Manufactured
    1989
    Price
  • used, Good | Control System: MS-100 | Working table length: 12000 mm | Working table width: 3500 mm | Maximum sheet thickness when cutting: 10-200 mm | Maximum feed rate X axis: 30000 mm / min | Maximum travel speed for actuators of X and Y axes: 7000 mm / min | Precise positioning: 0.3 mm | Total power ... » more

    Manufactured
    2013
    Price
  • used, good | Working area: 13500x3000 mm | Operating hours: 1715 | Closing hours: 1415 | Control: IMSNC MicroStep CNC | Max. Cutting thickness: | Plasma: 80 mm | Autogenous: 150 mm | Plasma source: HiFocus 440i + FlowControl 3 | Plasma torch: PerCut 370.1 and 370.2 (for different thicknesses). Kjellberg | ... » more

    Manufactured
    2010
    Price
  • used, Good | Table: 2x3 m | Max. Number of heads: 4 | Track width: 2500 mm | Cutting width * - 1 burner: 2100 mm | Cutting width * - 2 burners: 1970 mm | Cutting width * - 3 burners: 1840 mm | Cutting width * - 4 burners: 1710 mm | minute Parallel cut: 90 mm | Cutting speed: 50 - 6000 mm / min. | Cutting ... » more

    Manufactured
    2004
    Price
  • used, workshop-tested, very good, including UVV test protocol | Of machine plasma cutting machine inverter | Make Hypertherm | Type Powermax 65 | Supply voltage 3 x 400 volts | Adjustment range 20 - 65 amps | Duty cycle 50% duty cycle at 65 amps | 60% ED at 59 amps | 100% ED at 46 amps | Current adjustment stepless | Max. Separating cut 32 mm | Max. ... » more

    Manufactured
    2018
    Price
    3.100 EUR
  • used, workshop tested very well including UVV test protocol » more

    Manufactured
    Price
    590 EUR
  • demonstration machine, Workshop-tested, very well including UVV workshop test report » more

    Manufactured
    Price
    2.190 EUR
  • used, Good | Control system: MGM MS 100 | Working table length: 3000 mm | Working table width: 1500 mm | Input power: 25-80 A | Maximum sheet thickness when cutting: 10 mm | Plasma source: 2x Hypertherm Powermax 1250 | Machine length: 5500 mm | Machine width: 2500 mm » more

    Manufactured
    2010
    Price
  • new | Working area: 1,000 x 2,000 mm | Bridge passage: 120 mm | Piercing power: 12 mm | Separating cut: 25 mm | recommended thickness (unalloyed steel): 4 mm | Max. Thickness (unalloyed steel): 6 mm | Repeat accuracy: 1/10 under mm | Volume of water tub:. 300 ca l | Length: 2,560 mm | Width: 1,460 ... » more

    Manufactured
    Price
  • used, Workshop-tested, very well including UVV workshop test report | Of machine plasma cutting machine inverter | Make Hypertherm | Type Powermax 85 | Supply voltage 3 x 400 volts | Adjustment range 20 - 85 amps | Duty cycle 60% duty cycle at 85 amps | 100% ED at 66 amps | Current adjustment stepless | Max. Quality cut at 250 mm / min 30 mm | Max. Quality cut ... » more

    Manufactured
    2018
    Price
    3.800 EUR

Search marketplace