Kurt Steiger Werkzeugmaschinen GmbH

used, very good condition | Center height: 285 mm | Distance between centers: 1500 mm | Circumferential Ø: over bed 580 mm | Spindle bore: 72 mm | Spindle mount: Gr. 8th | Mounting cone tailstock: 5 MK | Spindle speeds: 20 - 2000 rpm | Feeds: longitudinal / flat 0.05-16.32 / 0.025-8.16 mm / rev | Thread pitches: 0.5 - ... » more

used, hardly used | Max. tube Ø: 6 - 48.3 mm | Max. bending angle: 0 - 360 ° | electrical Connection: 400 V, 1.8 kW | Space requirement: 4200 x 1300 x 700 mm | Weight: approx. 300 kg » more

used, well preserved | Working width: 1060 mm | Cutting capacity: 1.5 mm | Stop adjustment up to: 400 mm | Space requirement: 1950 x 600 x 550 mm » more

used, ready for use | gr. Working width: 3000 mm | for sheets up to: 3.75 mm | Opening width of upper beam: 300 mm | Bending beam adjustability: 40 mm | Upper beam drive: 2.2 kW | Lower beam drive: 3.5 kW | electrical Connection: 380 V kW | Weight: 5600kg | Space requirement: 1260 x 4600 x 1400/1700 mm » more

used, ready for use | Max. cutting length: 200 mm | Sheet thickness: 4 mm | Cutting angle adjustment: 30 - 135 ° | Stroke rate: 60 /min | electrical Connection: 400 V, 4 kW | Weight: 957kg | Space requirement: 1600 x 1000 x 1500 mm » more

used, ready for use | Saw blade Ø: 370 mm | Cutting area at 90° round: 105 mm | Cutting area at 90° rectangle: 300 x 30 mm | Cutting area in miter at 45° round: 105 mm | Miter cutting area at 45° rectangle: 140 x 70 mm | Cutting speed: 11/22 m/min | Drive motor: 380 V, 1.2/2 kW | Space requirement: 1050 x 1000 x ... » more

used, very good condition | gr. Working width: 2520 mm | for sheets up to: 1.5 mm | Opening width of upper beam: 180 mm | Bending beam adjustability: 40 mm | Bending angle adjustment: 135° | Weight: 1970kg | Space requirement: 3630 x 750 x 1250 mm » more

used, very good condition | Tip height: 123 mm | Center width: 560 mm | Circulation Ø: over bed 280 mm | Spindle bore: 27mm | Spindle speeds: 60 - 1250 rpm | Feeds: longitudinal/planar 0.091-2.553/0.046-1.292 mm/rev | Thread pitch: 0.25 - 11 mm | electrical connection: 380 V, 0.75 kW | Space requirement: 1300 x 700 x ... » more

used, well preserved | Pressure force: 135 t | Working width: 4100 mm | Clear column width: 3150 mm | Stand projection: 250 mm | max. installation height: 310 mm | Working speed: 7 mm/sec | Return stroke speed: 50 mm/sec | electr. Connection: 400 V, 11 kW | Weight: 10.8 tons | Space requirement: 4250 x 1800 x 2400 ... » more

used, new | Rated power at 50% ED: 100 kVA | Projection: 1100 mm | Electrode force adjustable: 100 - 600 daN | Electrode arm adjustment: 300 mm | Required air pressure: 6 bar | Welding power max.: 162 kVA | Weight: 670 kg | Required space: 2000 x 700 x 1850 mm » more

used, almost new | Max. flow rate: 1500 m³/h | Max. negative pressure: 2500 Pa | 1 filter, filter area: 15 m² | electr. Connection: 400 V, 2.2 kW | 2 suction openings: 140 mm Ø | Space required for the system: 950 x 750 x 1375 mm | Weight: 74kg | 2 movable Extraction arms: 2 x 1.5 m long » more

used, operational | Maximum compression force: 55 kN | Projection: 175 mm | Punch stroke adjustable: 0 - 28 mm | Number of strokes at 15 mm stroke: 30 | Latch stroke adjustable: 0 - 60 mm | Hydraulic drive: 380 V, 3 kW | Required space: 1170 x 620 x 1470 mm | Weight: 930 kg » more

used, used | Pressure force: 25 tons | Projection: 200 mm | Table size: 450 x 600 mm | Drop-through hole in the table: 100 x 210 mm | Table adjustment: 240 mm | Ram adjustment: 70 mm | Stroke adjustment: 4 - 80 mm | Number of strokes: 150 / min | Drive Motor: 380V 1.1KW | Required space: 1300 x 800 x 2000 ... » more

used, used | Pressure force: 25 tons | Projection: 200 mm | Table size: 450 x 600 mm | Table adjustment: 240 mm | Ram adjustment: 70 mm | Stroke adjustment: 4 - 80 mm | Number of strokes: 150 / min | Drive Motor: 380V 1.1KW | Required space: 1600 x 850 x 2000 mm | Weight: approx. 1450 kg » more

used, well preserved | Saw blade Ø: 275 mm | Cutting range at 90° round: 90 mm | Cutting area at 90° rectangle: 75 x 75 mm | Cutting area in miter at 45° rectangle: 75 x 75 mm | Saw blade speed: 40/80 rpm | Drive motor: 380 V, 1/1.2 kW | Required space: 700 x 600 x 1580 mm | Weight: about 180 kg » more

used, well preserved | Saw blade Ø: 300 mm | Cutting range at 90° round: 100 mm | Cutting area at 90° rectangle: 120 x 85 mm | Cutting area in miter at 45° round: 85 x 85 mm | Saw blade speed: 40/80 rpm | cutting speed: | Drive motor: 380 V, 1.0/1.2 kW | Required space: 850 x 520 x 1500 mm | Weight: about 200 kg » more

used, well preserved | large working length: 1000 mm | max. sanding width: 250 mm | max. workpiece height approx.: 120/160 mm | Grinding wheel outer Ø: 300 mm | Grinding wheel speed: 1000 - 2400 rpm | Grinding wheel drive: 15 kW | Required space: machine 2000 x 430 x 1000 mm | Weight: 2000kg » more

used, ready for use | Saw blade Ø: 300 mm | Cutting range at 90° round: 100 mm | Cutting area at 90° rectangle: 90 x 90 mm | Cutting area in miter at 45° rectangle: approx. 40 x 120 mm | Saw blade speed: 33/66 rpm | Drive motor: 380 V, approx. 1.3 kW | Required space: 850 x 600 x 1600 mm » more

used, ready for use | Center height: 125 mm | Spindle Bore: 36mm | Speed range: 700/1100/1200 rpm | Drive motor: 380 V, approx. 0.6 kW | Required space: 1100 x 700 x 1250 mm » more

used, absolutely new | Projection: 620 mm | Table size: 600 x 885 mm | Table pivotable: +/- 10 - 15° | Maximum cutting width: 620 mm | Cutting height max.: 400 mm | Saw band length: 4730 - 4800mm | Impeller Ø: 640 mm | Impeller speed: 810 rpm | Drive motor: 400 V, 2.2 kW | Required space: 1750 x 1200 x 2150 mm | ... » more