Offer of a used machine in bed type milling machines
Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles.
Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines
Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases
One sole operator can control the DUPLEX milling machines
Reduced space and investment requirement comparing with two single machines
Fast investment amortisation due to the high productivity
Duplex solution admits different configurations: single working area, pendulum working areas
For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo
X-Axis: 4300mm
Y-Axis: 1200mm
Z-Axis: 1460mm
Table Length: 5000mm
Table Width: 2130mm
Table load: 40000
Power on spindle: 22/30kW
Spindle speeds: 60 - 3000Rpm
Spindle Taper: 50ISO/Bt/Mk
Feed rate X-Axis: 10000mm/min.
Feed rate Y-Axis: 10000mm/min.
Feed rate Z-Axis: 10000mm/min.
Millinghead auto-index:2.5 x 2.5°
Length: 10060mm
Width: 9100mm
Height: 3990mm
Weight: 40000kg
www.mach4metal.com
Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles.
Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines
Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases
One sole operator can control the DUPLEX milling machines
Reduced space and investment requirement comparing with two single machines
Fast investment amortisation due to the high productivity
Duplex solution admits different configurations: single working area, pendulum working areas
For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo
X-Axis: 4300mm
Y-Axis: 1200mm
Z-Axis: 1460mm
Table Length: 5000mm
Table Width: 2130mm
Table load: 40000
Power on spindle: 22/30kW
Spindle speeds: 60 - 3000Rpm
Spindle Taper: 50ISO/Bt/Mk
Feed rate X-Axis: 10000mm/min.
Feed rate Y-Axis: 10000mm/min.
Feed rate Z-Axis: 10000mm/min.
Millinghead auto-index:2.5 x 2.5°
Length: 10060mm
Width: 9100mm
Height: 3990mm
Weight: 40000kg
www.mach4metal.com
Subject to alterations and errors in the technical datas, specifications and pricing and subject to prior sale.
Short Link to this page: https://www.blechzulieferer.com/70457/offer
Vendor
Mach4Metal
Transito 21
6909 DA Babberich
(Netherlands)
Contact person: Laura Lochner
Phone: +31 (0)316-247123
Telefax: +31 (0)316-247956