Amaron s.r.o.

used, Good | Inv. Num.: 5148 | Type: URWA 250 | Producer: Profiroll | Generated: 2004 | Parameters: | Rolling force: 800 kN | Max. Workpiece diameter: 250 mm | Workpiece width: 80 mm | Spindle diameter: 110 mm | Spindle speed: 100-800 1 / min | Mandrel diameter: 45-100 mm | Length: 2400 mm | Width: 2400 ... » more

used, Good | Inv. Num.: 5147 | Type: MULTUS SB 400 | Producer: OKUMA | Generated: 2007 | Parameters: | Control system: OSP P 200 L | Maximum turning length: 1500 mm | Maximum turning diameter over bed: 710 mm | X-axis travel: 690 mm | Y-axis travel: 230 - 115 mm | Z-axis travel: 1545 mm | W-axis travel: ... » more

used, Good | Inv. Num.: 5145 | Type: MG 6001.20 PrkB + CH1 200P | Producer: Microstep | Generated: 2018 | Parameters: | Working table length: 6000 mm | Working table width: 2000 mm | Furnishing: | Head 3D | Drilling and tapping arm » more

used, Good | Inv. Num.: 5141 | Type: DMC 635 V | Producer: DMG | Generated: 2006 | Parameters: | Control system: Siemens 840 D | Operating hours: 23227 h | Switch-on hours: 8709 h | Working table length: 790 mm | Working table width: 560 mm | Mechanical feed length axis X: 635 mm | Mechanical feed length ... » more

used, Good | Inv. Num.: 2997 | Type: FLP 2200 | Producer: FOREST LINE | Generated: 1984GO1999 | Parameters: | Working table length: 9300 mm | Working table width: 2200 mm | Speed: 0-1500 1 / min | Total power requirement: 120 kVA | Maximum workpiece weight: 18000 kg | Max. Workpiece dimensions: ... » more

used, Good | Inv. Num.: 5140 | Type: Roboform 30 | Producer: Charmillles | Generated: 1999 | Parameters: | Operating hours: 22 360 h | Max. Travel length of the X-axis: 350 mm | Max. Travel length of the Y-axis: 250 mm | Max. Travel length of the Z-axis: 300 mm | Machine weight: 2300 kg | Number of axes: ... » more

used, Good | Control system: Winmax 5 | Working table length: 762 mm | Working table width: 406 mm | Maximum table load (even): 1500 kg | Spindle drive power: 11 kW | Maximum vertical spindle speed: 10000 1 / min | Mechanical feed length axis X: 660 mm | Mechanical feed length axis Y: 406 mm | Mechanical ... » more

used, Good | The machine is in good condition. » more

used, Good | Inv. Num.: 5132 | Type: SN 50 B / 1500 | Producer: TOS | Generated: | Parameters: | Maximum turning length: 1500 mm | Maximum turning diameter over bed: 500 mm | Maximum turning diameter over support: 270 mm | Spindle power: 5.5 kW » more

used, Good | Control system: Heidenhain | Working table length: 800 mm | Working table width: 460 mm | Mechanical feed length axis X: 500 mm | Mechanical feed length axis Y: 400 mm | Mechanical feed length axis Z: 400 mm | Speed: 2500 rpm | Machine weight: 1.7 t | Furnishing: | DRO » more

used, Good | 2018: GO spindle and new guides | 2018: Repair of the control system | 2015: X- and Z-axis screws replaced | Control system: FANUC 21i-T | Maximum turning diameter over bed: 540 mm | Maximum turning diameter over support: 290 mm | Maximum spindle speed: 4000 1 / min | Weight: 4500 kg | ... » more

used, Good | Maximum turning diameter: 60 mm | Arm length: 1250 mm | Total power requirement: 5 kW | Cone: MK 5 | Machine height: 2800 mm | Machine length: 2200 mm | Machine width: 1000 mm | Machine weight: 3 t » more

used, Good | Maximum cutting length: 3100 mm | Maximum sheet thickness when cutting: 10 mm » more

used, Good | Control system: FANUC | Table length: 400 mm | Table width: 250 mm | Maximum part length X: 400 mm | Maximum workpiece width Y: 250 mm | Maximum workpiece height Y: 210 mm | Furnishing: | Manual control | list » more

used, Good | Maximum sheet plate width: 2000 mm | Max. Speed: 13 m / min | Sheet thickness: 0.55-1.2 mm | Power consumption: 1.1 kW | Machine dimensions: 1280x1300x2520 mm | Weight: 500 kg » more

used, Good | Operating hours: 2964 h | Switch-on hours: 1485 h | Throwing wheel: 231 h | Max. Workpiece diameter: 250 mm | Maximum filling volume: 30 l | Throw wheel power: 2.2 kW | Maximum spindle speed: 9000 1 / min | Quantity: 12-15 pieces | Maximum workpiece weight: 90 kg | Machine dimensions: ... » more

used, Good | Maximum press force: 110 t | Table length: 1150 mm | Table width: 680 mm | Minimum slide stroke: 180 mm | Maximum stroke rate: 70 1 / min | Machine length: 2020 mm | Machine width: 1390 mm | Machine weight: 8000 kg » more

used, Good | Inv. Num.: 5119 | Type: VP 124 AP | Producer: VERNET BEHRINGER | Generated: 1999 | Parameters: | Control system: Windows 7 | Total power requirement: 40 kW | Table dimensions: 12x5 m | Length of the input / output conveyor: 12/10 m | Profile length: 0.5-12 m | Punch diameter: 12-32 mm | ... » more

used, Good | Maximum cutting length: 2050 mm | Maximum slice thickness: 3 mm | Maximum cutting angle: 2.10 st | Maximum number of strokes per minute: 35 1 / min | Machine height: 1410 mm | Machine length: 2691 mm | Machine width: 2000 mm | Machine weight: 1420 kg | Furnishing: | Foot control » more

used, Good | Maximum press force: 160 t | Machine weight: 16100 kg » more