Weber Werkzeugmaschinen Mindelheim

used | Technical data: | Tool holder: B 16; 0 - 13 | Drilling capacity: steel 14 mm; aluminum 25 mm; wood 40 mm | Speed range: 400 - 4500 rpm | Spindle stroke: 60 mm | Base plate size: 220 x 300 mm | Distance between drill chuck and base plate: 80 - 290 mm | Thrust: 205 mm | Column diameter: 60 mm | ... » more

used | Technical data: | Tool holder: B 16 ; 1 - 13 | Drilling capacity: 13 mm | Speed range: 400 - 2300 rpm | Spindle stroke: 80 mm | Base plate size: 240 x 215 mm | Distance between drill chuck and base plate: 130 - 280 mm | Thrust: 200 mm | Column diameter: 70 mm | Motor power: 0.3 kW | ... » more

used | Technical data: | Tool holder: B 6 ; 1 - 13 | Drilling capacity: 13 mm | Speed range: 400 - 2300 rpm | Spindle stroke: 75 mm | Base plate size: 240 x 215 mm | Table size: 200 x 235 mm | Thrust: 200 mm | Column diameter: 70 mm | Motor power: 0.3 kW | Connection: 400 V | Weight, approx.: 70 kg ... » more

used | Technical data: | Sawing range | 90° round: 300 mm | 90° flat: 300 x 300 mm | Feed: 10 mm | Multi-feed: 6000 mm | Max. sawing speed: 0 - 115 1/min | Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm | Equipment: | - Chip conveyor | - Coolant system | - Emergency stop button » more

used | Technical data: | Centre height: 220 mm | Centre width: 1000 mm | Spindle bore: 55 mm | Bed width: 430 mm | Speeds, 2-stage: 18 - 1800 rpm | Tailstock mount: MK 4 | Quill stroke: 190 mm | Feed: 0.30 - 3.26 mm/rev | Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm | Equipment: | - Multifix ... » more

used | Technical data: | Centre height: 230 mm | Centre width: 1000 mm | Swing diameter over bed: 475 mm | Swing diameter over bed slide: 320 mm | Spindle bore: 50 mm | Bed width: 300 mm | Speeds: (18) 25 - 2240 1/min | Motor power: 3.5 / 6 kW, 2-stage | Tailstock mount: MK 4 | Quill stroke: 120 mm ... » more

used | Technical data: | Punching force: 35 t | Thrust: 145 mm | Flat steel: 150 x 13 mm / 360 x 5 mm | Angle iron: 75 x 75 x 8 mm | Hole punch: ø 25 x 12 mm / ø 30 x 10 mm | Rated current: 6.9 A | Connection: 400 V | Weight, approx.: 500 kg | Dimensions (WxDxH), approx.: 750 x 980 x 1500 mm | ... » more

new | 4th axis including control for: milling, grinding, testing/measuring; engraving | Also IDEAL for “machines in training” | Technical data: | Tip height: 110 mm | Spindle nose: HSK 63 taper, outside ø 70 mm 0/-0.005 mm | Clamping torque: 250 Nm | Concentricity and axial runout: 0.006 (optional: ... » more

used | Technical data: | Center height: 190 mm | Center width: 1000 mm | Spindle bore: 56 mm | Bed width: 305mm | Speeds: 25 - 2000 1/min | Drive power: 4 kW | Tailstock mount: MK 4 | Quill stroke: 150 mm | Feeds: 0.022 -0.800 mm/rev | Weight, approx.: 1500 kg | Dimensions (WxDxH), approx.: 2160 x ... » more

used | Technical data: | Center height: 190 mm | Center width: 1000 mm | Spindle bore: 63 mm | Bed width: 305mm | Speeds: 25 - 2000 1/min | Drive power: 5 kW | Tailstock mount: MK 4 | Quill stroke: 150 mm | Feeds: 0.022 - 0.800 mm/rev | Weight, approx.: 1500 mm | Dimensions (WxDxH), approx.: 2160 x ... » more

used | Jouhsen PrecisionCut UDWO and UD 1 | Year of manufacture 1995 + 2001 | Technical data: | Wire ø: 0.2 - 1.3 mm | Wires: 1 | Max. feed stroke per MS rotation: 100 mm | Cutting length: 5 - 300 mm | Overall performance | Pieces/min: 500 | m/min: 15 | smallest cutting length 1.5 x ø » more

used, Fine | Technical data: | Workspace | Tube ø, max.*: 12.7 mm | Standard lengths* (recommended): up to 2000 mm | From BMZ magazine: 100 - 2000 mm | CNC axes | Standard / Maximum: 7 / 10 | Bending head: 3 axes | Spindle unit (without swiveling): 2 axes | Lateral movement bending head: 1 axis | ... » more

used | Technical data: | Speed: 2800 1/min | Saw blade: ø 380 mm | Motor power: 3000W | Roller conveyor, approx.: 128 mm | Weight, approx.: 200 kg | Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feeds: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x ... » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feed: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x 880 ... » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feeds: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x ... » more

used | Technical data: Plate lifting device | Load capacity: 150kg | Format: 2300 x 1000 mm | Suction plates: 6 x ø1100 mm | Area requirement: 2300 x 1100 mm » more

used | Working length: 1020 mm | Sheet metal output max.: 3.5 mm | Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm » more

used | Technical data: | sawing area | 90° round / flat / square: 265 / 300 x 150 / 200 x 200 mm | 75° left/right round / flat / square: 265 / 280 x 150 / 200 x 200 mm | 60° left/right round / flat / square: 250 / 250 x 150 / 200 x 200 mm | 45° left/right round / flat / square: 200 / 200 x 100 / 180 ... » more

used | Technical data: | Tool holder: MK 4 | Drilling capacity: 40 mm | Speed range: 56 - 1250 1/min | Spindle stroke: 240 mm | Feeds: 0.06 - 0.84 mm/rev | Table size: 1040 x 380 mm | Throat: 360 mm | Column diameter: 240 mm | Motor power: 6.5 kW | Connection: 400 V | Weight, approx.: 2300 kg | ... » more

used | Technical data: | Tool holder: SK 40 | Travel paths X/Y/Z: 620 / 420 / 400 mm | Speed range: 40 - 2200 1/min | Table size: 800 x 380 mm | Motor power: 4 kW | Dimensions (WxDxH), approx.: 1780 x 1600 x 2130 mm » more

used | Technical data: | Tool holder: SK 40 | Travel paths X/Y/Z: 500 / 350 / 380 mm | Speed range: 63 - 3700 1/min | Spindle stroke: 50 mm | Feeds X/Y/Z: 0 - 1000 mm/min | Table size: 800 x 360 mm | Motor power: 8 kVA | Dimensions (WxDxH), approx.: 1370 x 1900 x 1860 mm | Furnishing: | - 3-axis ... » more

used | Technical data: | Tool holder: SK 40 | Travel distances (X/Y/Z): 500 / 350 / 380 mm | Speed range: 63 - 3700 1/min | Feeds (X/Y/Z): 0 - 1000 mm/min | Motor power: 8 kVA | Dimensions (WxDxH), approx.: 1400 x 2000 x 1850 mm | Furnishing: | - 3-axis digital display Heidenhain | - Spindle ... » more

used | Technical data: | Grinding length: 750 mm | Grinding width: 250 mm | Grinding headstock/ | Drive power: 5 kW | Table clamping surface: 720 x 200 mm | Grinding height to center of spindle: 500 mm | Grinding wheel: 225/250 x 25 x 51 mm | Max. table load: 100 kg | Power supply: 3 phases, 400V » more

used, Good | Technical data: | along the X axis: 500 mm | vertical Y axis: 350 mm | transverse Z-axis: 380 mm | Speed range: 63 - 3700 1/min | Switching levels: 2 | Tool holder: SK 40 | Quill stroke vertical: 50 mm | Motor power: 5 kVA | Feed in X, Y, Z axes: 7 - 700 mm/min | Weight, approx.: 1350 kg | ... » more

used, Good | Technical data: | Tool holder: SK 40 | Travel paths X/Y/Z: 700 / 500 / 500 mm | Speed range: 63 - 3150 1/min | Spindle stroke: 100 mm | Feeds: X,Y axis 16 - 800 mm/rev; Z axis 8 - 400 mm/rev | Rapid traverse: X,Y axis 3000 mm/rev; Z axis 1500 mm/rev | Angle table size: 900 x 500 mm | Motor ... » more

used, Good | Technical data: | Travel paths X/Y/Z: 400 x 400 x 375 mm | Max. clamping area: 350 x 800 mm | Speed range: (12) 50 - 2240 1/min | Feed, continuously: 1 - 630 mm/min | Rapid traverse, max.: 1.4 m/min | Total connected load: 4.7 kW | Dimensions (LxWxH), approx.: 1300 x 1215 x 1700 mm | Weight, ... » more

used | Technical data: | Steel drilling capacity: 24 mm | Continuous drilling performance steel: 20 mm | Drilling-milling head vertical: +/- 45° | Milling head horizontal: +/- 90° | Table size: 1370 x 254 mm | Travel paths | X / Y / Z - axis manual: 820 / 410 / 400 mm | X / Y / Z axis automatic: 740 ... » more

used | Technical data: | Tool holder: MK 4 | Drilling capacity in ST 60: ø 25 mm | Drilling capacity in cast iron GG 20: ø32 mm | Thread cutting performance in ST 60: M24 | Thread cutting capacity GG20: M30 | Speed range: (12) 102 - 2000 1/min | Spindle stroke: 150 mm | Feeds: 0.1 / 0.2 / 0.3 mm/rev ... » more

used | Technical data: | Adjustment of the cross support | in the horizon. Longitudinal axis (X-axis): 700 mm | in the vertical axis (Y-axis): 450 mm | Adjustment of the headstock | in the horizon. Transverse axis (Z axis): 500 mm | Tool holder: SK 40 | Quill stroke: 100 mm | Speeds: 20 - 3150 1/min ... » more

used | HSK - guillotine shears with motor drive: | - Engine: Dietz 380-3-50, 2.2 kW | - D. stroke rate 100 p.min | - Weight approx. 700 kg | - Drive via brake motor | - Editing is triggered via a movable foot switch | - Scissor table with support table widened to approx. 600 mm | - Side stop TA 500 ... » more

used | Technical data: | Workspace | X axis: 500mm | Y axis: 400mm | Z axis: 300mm | work spindle | Tool holder: ISO 40 | Automatic feeds: 0.2 - 0.6 - 0.12 mm/min | Spindle speeds: 20 - 4000 1/min, directly programmable | Feed drive: Single drive in X/Y/Z | Feed range: X / Y / Z = 1 - 3000 mm/min | ... » more

used | Technical data: | Sheet thickness max.: 2.5 mm | Cutting length: 2520 mm | Weight, approx.: 2200 kg | Dimensions (LxDxH), approx.: 3660 x 800 x 1690 mm | 3 goat's foot segments with the following dimensions: | - Depth 40mm | - Height 145mm | - Length: 540 / 785 / 1140 mm » more

used | Technical data: | Center height: 255 mm | Center width: 1450 mm | Spindle bore: 63 mm | Bed width: 385mm | Speeds: (12) 20 - 1100 1/min | Tailstock mount: MK 4 | Quill stroke: 150 mm | Weight, approx.: 2250 kg | Dimensions (LxDxH), approx.: 3100 x 1000 x 1580 mm | Furnishing: | - 2-axis ... » more

used, Good | Technical data: | sawing area | 90° Round: 280mm | 90° flat: 280 x 160 mm | 90° square: 240 x 240 mm | 45° round: 180mm | 45° flat: 150 x 250 mm | 45° square: 170 x 170 mm | Number of strokes: 40 / 51 / 64 / 80 / 102 / 128 mm | Cutting speed: 11 - 36 m/min | Saw band: 450 x 40 x 2.0 mm | ... » more

used, Good | Technical specifications: | cutting performance | Max. round bar diameter: 36 mm | Max. thickness of the square bar: 30 mm | Max. flat steel thickness: 200 mm | Number of strokes: 45 rpm | Weight, approx.: 1760 kg | Dimensions (LxDxH), approx.: 2300 x 850 x 1550 mm | Further technical data ... » more

used, Good | Technical specifications: | Tool holder: MT 3 | Drilling capacity: 30 mm | Speed range, infinitely variable: 125 - 4000 rpm | Spindle stroke: 120 mm | Table size: 420 x 340 mm | Projection: 280 mm | Column diameter: 110 mm | Motor power: 0.9 / 1.45 kW | Connection: 400V | Dimensions (WxDxH), ... » more

used, Very good | Technical specifications: | Tool holder: SK 40 | Traverse paths X/Y/Z: 500 / 400 / 400 mm | Speed range, infinitely variable: 20 - 450 rpm | Feeds: 0- 5000 mm/min | Clamping area: 700 x 500 mm | Motor power: 17 kVA | Connection: 400V 32A | Table swivels: 360° | Weight, approx.: 3000 kg | ... » more

used, Good | Technical specifications: | Clamping area: 1100 x 250 mm | Number of T-slots: 3 | traverse paths: | Longitudinal movement, automatic: 680 mm | Longitudinal movement, manual: 700 mm | Lateral movement, automatic: 260 mm | Lateral movement, manual: 280 mm | Vertical movement, automatic: 390 mm ... » more

used, Good | Disc size: ø 315 mm x 40 mm, bore 75 mm | Motor power: 1.1 kW | Weight, approx.: 270 kg | Dimensions (WxDxH), approx.: 980 x 600 x 1210 mm | Furnishing: | - 5 new discs » more

used, Good | Cutting length: 1020 mm | Sheet power: 1.25 mm | Table size: 700 x 1150 mm | Weight, approx.: 290 kg | Furnishing: | - hold down | - Lateral stop with angle adjustment and handwheel » more

used, Very good | Load capacity: 1000 kg | Lifting height: 2050mm | Fork length: 1150mm | Motor: 1200W | Battery: 24V | Weight, approx.: 402 kg | Transport dimensions (LxDxH), approx. 2000 x 790 x 1580 mm » more

new, New | Technical data: | Capacity: 160 tons | Installation height: 1100 mm | Working area, max.: 1100 x 350 mm | Piston stroke: 400 mm | Forward speed: 6.2 mm/s | Return speed: 6.8 mm/s | Motor power: 5.5 kW | Width: 1640mm | Depth: 1000mm | Height: 2550mm | Weight, approx.: 1300 kg | Equipment: | - ... » more

new, New | Technical data: | Capacity: 100 tons | Installation height: 1010 mm | Working area, max.: 1010 x 300 mm | Piston stroke: 400 mm | Forward speed: 7.12 mm/s | Return speed: 13.42 mm/s | Motor power: 4 kW | Width: 1600mm | Depth: 850mm | Height: 2450mm | Weight, approx.: 1000 kg | Furnishing: | ... » more

new, New | Technical data: | Capacity: 60 tons | Installation height: 820 mm | Working area, max.: 820 x 300 mm | Piston stroke: 400 mm | Forward speed: 6.1 mm/s | Return speed: 10 mm/s | Motor power: 3 kW | Width: 1460mm | Depth: 850mm | Height: 2400mm | Weight, approx.: 700 kg | Furnishing: | - ... » more

used, Good | Center height: 160 mm | Distance between centers: 880 mm | Spindle bore: 48 | Bed width: 312mm | Speeds: (12) 45 - 2000 rpm | Motor power: 5.5 kW | Tailstock mount: MK 4 | Quill stroke: 140 mm | Weight, approx.: 1500 kg | Dimensions (WxDxH), approx.: 2250 x 1030 x 1650 mm | Furnishing: | - 3 ... » more

used, Good | Center Height: 165mm | Distance between centers: 750 mm | Spindle Bore: 38mm | Bed width: 195 mm | Speeds: (16) 35 - 2480 rpm | Motor power: 2.5 / 2.0 kW | Tailstock mount: MK3 | Quill stroke: 100 mm | Dimensions, approx.: 1650 x 540 x 1450 mm | Furnishing: | - 3-jaw lathe chuck | - Emergency ... » more

used, Good | Working length: 1040mm | Sheet thickness: 4 mm | Cutting Angle: 1.6° | Back gauge: 10 - 750 mm | Number of hold-down devices: 1 (13000N) | Side stop: 70 - 850 mm | Travel speed: 90 mm/s | Projection (WxH): 20 x 125 mm | Weight, approx.: 1600 kg | Dimensions (WxDxH), approx.: 1850 x 1870 ... » more

used, Good | Saw blade diameter: 400 mm | Connection: 400V | Furnishing: | - 2 saw units | - Pneumatic vise » more

new | 10 pcs. Pressure mandrel set suitable for the following workshop presses: | WK 10 TH | WK 12 FH | WK 20 FH | WK15TH Pro | WK 20 FH Pro | WK 30 FH Pro | WK 50 FH Pro | PWK 10 T | PWK 20 F | PWK 45 F | PWK 50 F | PWK 75 F | PWK 100 F | Pressure performance Diameter (A) Diameter (B) Length (C) | ... » more

new | Center height: 205 mm | Swing over bed: 410 mm | Distance between centers: 1000 mm | Bed Width: 260mm | Spindle nose: DIN 55029 (Camlock) 9, size. 6 | Cross slide travel: 220 mm | Travel top slide: 125 mm | Spindle Bore: 52.5mm | Spindle speeds: 20 - 3000 min-1 | Speed control: Stepless | ... » more

new | Image shows MIOTAL® TC 180 x 1000 | Distance between centers: 750 mm | Center height: 165 mm | Swing over bed: Ø 330 mm | Bed width: 190mm | Cross slide travel: 160 mm | Travel top slide: 90 mm | Spindle connection: DIN 55029 (Camlock) D 1 - 4 | Spindle bore: Ø 40 mm | Max. chuck diameter: Ø ... » more

used, good | Center height: 120 mm | Distance between centers: 450 mm | Spindle passage/bore: 23 mm | Board width: 100 mm | Speeds: (12) 180 - 2240 rpm | Travel top slide: 140 mm | Tailstock mount: MK 2 | Quill stroke: 80 mm | Motor power: 2.5 kW | Connection: 400V | Dimensions approx.: 1300 x 880 x 1250 ... » more

new | Cutting width: 355 mm | Cutting height: 230 mm | Working height: 960 mm | Table size: 500 x 400 mm | Stepless cutting speed: 20 - 90 m/min | Saw band length: 2840 mm | Saw band width: 3 - 16 mm | Tilt and tilt table in 4 directions: 15° | Motor power: 0.75 kW | Weight approx.: 250 kg | Scope ... » more

new | Cutting width: 520 mm | Cutting height: 310 mm | Working height: 1000 mm | Average speed 1: 25 - 85 m / min | Average speed 2: 120 - 500 m / min | Saw band: 3880 mm | Saw band width: 3 - 16 mm | Table size: 600 x 500 mm | Table swivel range (in 4 directions): 15 ° | Motor Power: 1.5 kW | ... » more

new | Projection: 610 mm | Installation height: 340 mm | Working height: 1015 mm | Table size: 600 x 500 mm | Table size additional table: 220 x 500 mm | Saw band length: 3970 mm | Cutting speed, stepless: 20 - 85 / 120 - 500 m/min | Saw band width: 3 - 16 mm | Table can be tilted in 4 directions: ... » more

new | Cutting width: 1010 mm | Cutting height: 340 mm | Working height: 1000 mm | Table size: 600 x 500 mm | Stepless cutting speed: | 1st gear: 20-85 m/min | 2nd gear: 120 - 500 m/min | Saw band length: 4540 mm | Saw band width: 3 - 16 mm | Tilt and tilt table in 4 directions: 15° | Motor power: ... » more

new | Cutting range around 90°, tube Ø: 95 mm | Cutting area flat 90°, profile: 110 x 65 mm | Cutting range around 45°, tube Ø: 90 mm | Cutting area flat 45°, profile: 85 x 75 mm | Max. saw blade Ø: 315 mm | Motor power: 1.1 / 1.8 kW | Connection: 400V | Weight, approx.: 150 kg | Furnishing: | - ... » more

new | cutting area: | around 0°: 170 mm | square 0°: 150 x 150 mm | flat 0°: 150 x 190 mm | around 45°: 125 mm | square 45°: 95 x 120 mm | Working height: 870 mm | Cutting speeds : 40 / 80 m/min | Saw band: 2080 x 20 x 0.9 mm | Coolant Pump: 100W | Saw motor: 0.75 kW | Connection: 400V | Dimensions ... » more

new | Cutting range around 0°: 150 mm | Cutting area square 0°: 150 x 150 mm | Cutting area flat 0°: 150 x 165 mm | Cutting range around 45°: 115 mm | Cutting area flat 45°: 115 x 130 mm | Cutting range around 60°: 60 mm | Cutting area flat 60°: 70 x 70 mm | Working height: 700 mm | Saw band ... » more

new | Cutting range around 0°: 127 mm | Cutting area flat 0°: 125 x 130 mm | Cutting range around 45° right: 90 mm | Cutting area square 45° right: 90 x 90 mm | Cutting range around 60° right: 45 mm | Cutting area square 60° right: 45 x 45 mm | Vise opening: 130 mm | Saw band dimensions: 1440 x 13 ... » more

new, new | Bernardo twist drill set 25 pieces. | - 1 -13mm | - 0.5 mm increasing | - HSS TiN - coated » more

used, very well | Tool holder: SK40 | Traverse paths X/Y/Z: 310 / 170 / 340 mm | Speed range: | Horizontal (16) 40 - 2000 rpm | Vertical (16) 50 - 2500 rpm | Spindle stroke: 60 mm | Feeds: 9 - 450 mm/min | Table size: 600 x 210 mm | Projection: 133 - 320 mm | Motor power: 1.6 / 2.9 kW | Connection: 400V 16A | ... » more

new | Technical specifications: | Drill diameter: 3 - 32 mm | Point angle: 90° - 140° | Grinding wheel speed: 4800 rpm | Connection: 230 V | Motor power: 0.25 kW | Weight, approx.: 32 kg | Dimensions LxWxH, approx.: 360 x 250 x 310 mm | Features: | - Ideal for grinding HSS/carbide twist drills | - ... » more

new | Technical specifications: | Drill diameter: 3 - 20 mm | Point angle: 90° - 140° | Speed: 4800 rpm | Connection: 230 V | Motor power: 0.12 kW | Weight, approx.: 8.6 kg | Dimensions, approx.: 290 x 150 x 180 cm | Characteristics: | - Ideal for grinding HSS/carbide twist drills | - Safe ... » more

new, new | Boring-milling machine: Bernardo | Type / model: FM 45 HSV with digital display | Condition: New | Drilling capacity in steel: 32 mm | Drilling capacity in cast iron: 40 mm | Milling cutter max.: 80 mm | Projection: 220 mm | Spindle speed: (12) 75 - 3200 rpm | Spindle mount: MK 4 | Quill ... » more

new, new | Belt dimensions: 75 x 2000 mm | Belt speed: 29 m/sec. | Contact disc Ø x W: 200 / 80 mm | Surface grinding table: 460 x 75 mm | Suction connection Ø: 100 mm | Motor power output S1 100%: 3.0 kW | Motor input power S6 40%: 4.0 kW | Voltage: 400V | Length: 1080mm | Width: 440mm | Height: 1000mm ... » more

used, good | Cutting angle from/to: 90° - 40° | Vise opening width: 260 mm | Belt speed: 2-stage | Saw band: 400 x 32 mm | Motor power: 0.48 / 0.65 kW | Dimensions: 1200 x 420 x 800mm | Approx. weight: 130 kg | Furnishing: | Coolant device without pump » more

new, new | magnetic chuck | Size: 300*150mm » more

new, new | Stepless toolmaker lathe TC 250 V | Center height: 250 mm | Circumferential diameter over slide: 350 mm | Swing diameter i.d. Offset: 695 mm | Distance between centers: 1500 mm | Spindle nose: DIN 55029, Camlock, Gr. 6th | Bed width: 305 mm | Cross slide travel: 272 mm | Upper slide travel: ... » more

used, very good, workshop checked, used | Tool holder: MK 2 | Drilling capacity: 18 mm | Speed range, stepless: 200 - 3600 rpm | Spindle stroke: 95 mm | Table size: 310 x 220 mm | Projection: 215 mm | Column diameter: 75 mm | Motor power: 0.55 / 1.1 kW | Connection: 380 V / 16 A | Weight: 95 kg | Dimensions LxWxH, approx .: 700 x 450 ... » more

new, new | Modern, precise production column drilling machine based on the tried and tested UNIMAX 3 concept with stepless feed drive, automatic tool ejector and chip breaking control as standard. The digital display shows feed, speed and drilling depth. Reversing switch right / left rotation. Emergency ... » more

new, new | Continuous drilling capacity in St 60: 18 mm | Normal drilling capacity: 20 mm | Infinitely variable spindle speeds: (4) 300 - 3,500 rpm | Spindle: MK 2 | Drilling depth: 95 mm | Projection: 180 mm | Distance spindle / table: up to 400 mm | Table area: 260 x 260 mm | Column diameter: 80 mm | ... » more

used, very good, workshop checked, used | Spindle: ISO 30 | Travel paths (X / Y / Z): 300/200/350 mm | Speeds: (8) 80 - 2200 rpm | Spindle stroke: 45 mm | Feed: 20 - 200 mm / min | Table size: 600 x 200 | Throat: 110 mm | Head swiveling: +/- 90 ° | Motor power: 1.1 / 1.4 kW | Connection: 380 V / 16 A | Dimensions, approx .: 1280 x ... » more

new, New, in original packaging | New goods, original packaging! | Base frame not included. Available at an additional cost. | Distance between centers: 550 mm | Tip height: 125 mm | Swing diameter over bed: 250 mm | Bed width: 135 mm | Spindle bore: 26 mm | Mounting in the spindle bore: MK 4 | Speed range: stepless, 50 - ... » more

used, well, ready for use | Jaw width: 160 mm | Jaw opening: 305 mm | Dimensions, approx .: L 570 x W 250 x H 130 mm | Weight, approx .: 50 kg » more

used, well, ready for use | Jaw width, approx .: 200 mm | Span, approx .: 365 mm | Dimensions LxWxH, approx .: 630 x 300 x 165 mm | Weight, approx .: 75 kg » more

used, well, ready for use | Table size: | - horizontal: 500 x 600 mm | - vertical: 310 x 600 mm | Tiltable: 90 ° | Dimensions LxWxH, approx .: 700 x 520 x 520 mm | Weight, approx .: 280 kg » more

used, very good, used | Machine vice, mechanical. | Jaw width, approx .: 200 mm | Span, approx .: 425 mm | Dimensions LxWxH, approx .: 630 x 300 x 165 mm | Weight, approx .: 75 kg » more

used, well, ready for use | Used machine vice with turntable | Jaw width, approx .: 180 mm | Span, approx .: 165 mm | Dimensions LxWxH, approx .: 610 x 360 x 180 mm | Weight, approx .: 60 kg » more

new, new | Illustration shows precision surface grinding machine: | FSM 2550 AH | Table size: 300 x 600 mm | Installation height: 500 mm | Max. Table load: 300 kg | Motor power: 4.6 kW | Connection: 400 V | Dimensions: 2300 x 1790 x 2200 mm | Weight, approx .: 2000 kg | Equipment and delivery: | - All ... » more

new, new | Drilling capacity max .: 35 mm | Thread cutting: M 24 | Tool attachment: MK 4 | Spindle speeds, stepless: 65 - 2000 rpm | Discharge: 265 mm | Drilling depth: 150 mm | Quill feed: 0.05 / 0.1 / 0.2 mm / rev | Column diameter: 115 mm | Table size / T-slot size: 685 x 485 mm / 14 mm | Motor ... » more

new, new | Air flow: 2520 m³ / h | Filter area: 1.45 m² | Max. Negative pressure: 1800 Pa | Suction connection Ø: 1 x 130/2 x 100 mm | Chip bag contents: 300 l | Idling speed: 2950 rpm | Sound pressure: 87.1 dB | Engine output S1 100%: 1.5 kW (2.0 hp) | Engine power S6 40%: 2.1 kW (2.8 HP) | Voltage: ... » more

new, new | Size: 900 x 600 mm | characteristics | - Harder than steel | - Preserves accuracy over years | - Guaranteed rustproof | - Incl. undercarriage » more

new, new | Coolant supply device consisting of metal container (tank size: 16 liters), coolant pump, hoses and valve. » more

new, new | Specifications: | Table size: 900 x 500 | Number of T-slots: 7 pieces | Vertical clamping surface: 1200 x 250 mm | Distance spindle - table: 40 - 440 mm | Max. Table load: 360 kg | Tool holder horizontal / vertical: ISO 40 (DIN 2080) | Milling head swiveling: +/- 90 ° | Speed range: (18) 40 - ... » more

new, new | Cutting area 90 °, round: 225 mm | Cutting area 90 °, square: 200 x 200 mm | Cutting area 45 °, round: 160 mm | Cutting area 45 °, square: 160 x 160 mm | Cutting area 60 °, round: 100 mm | Cutting area 60 °, square: 100 x 100 mm | Saw band: 2480 x 27 x 0.9 mm | Cutting speeds: 45/90 m / min | ... » more

new, new | cutting area | 90 °, tube, round: Ø 65 mm | 45 °, tube, round: Ø 55 mm | Saw blade: 250 x 2.5 mm | Motor power: 1.5 kW | Connection: 400 V | Weight, approx .: 110 kg | Standard equipment: | - Saw blade Ø 250 x 2.5 mm | - Underframe | - CE » more

new, new | Cutting area round / square 90 °: 255 mm / 210 x 210 mm | Cutting area flat 90 °: 310 x 210 mm | Cutting area round / square 45 °, right: 220 mm / 210 x 210 mm | Cutting area flat 45 °, right: 220 x 200 mm | Cutting area round / square 45 °, left: 230 mm / 200 x 200 mm | Cutting area flat 45 ... » more

new, new | Specifications: | Fixed angle table: | Clamping area of the fixed angle table: 800 x 400 mm | Max. Table load: 200 kg | Working spindle: | Tool holder horizontal and vertical: ISO 40 | Power of the main drive motor / 100% ED: 2.2 kW | Vertical milling: | Speed range, stepped: (12) 50 - 2000 ... » more

new, new | Drilling capacity max .: 30 mm | Thread cutting: M 16 | Tool attachment: MK 3 | Spindle speeds, stepless: 150 - 2500 rpm | Discharge: 265 mm | Drilling depth: 150 mm | Quill feed: 0.05 / 0.1 / 0.2 mm / rev | Column diameter: 92 mm | Table size / T-slot size: 500 x 400 mm / 14 mm | Motor ... » more

new, new | MCM TC series: | Top height: 225 - 350 mm | Tip width: 1000 - 5000 mm | Bed width: 400 mm | Spindle bore: 82/105 mm | Spindle speeds (24) 9 - 1600 or (12) 16 - 1200 rpm | Drive power 5.5 - 9.2 kW (option: 7.5 - 11 kW) | Weight: 2600 - 6100 mm | Extensive standard equipment, e.g. | - 3-axis ... » more

new, new | MCM Series T: | Center height: 180 - 255 mm | Tip width: 1000 - 1500 mm | Bed width: 290 mm | Spindle bore: 52 mm | Spindle speeds: 60 - 2000 rpm, 6 levels, stepless | Drive power 4 - 5.5 kW (Optional 5.5 - 7.5 kW) | Weight: 1800 - 2500 kg | Extensive standard equipment, for example: | - ... » more

new, new | Technical specifications: | Drill diameter: 13 - 32 mm | Point angle: 90° - 140° | Speed: 4800 rpm | Connection: 230 V | Motor power: 0.25 kW | Weight, approx.: 28 kg | Dimensions, approx.: 490 x 250 x 260 mm | Characteristics: | - Ideal for grinding HSS / carbide twist drills | - Safe ... » more

new, new | Technical specifications: | Drill diameter: 3 - 13 mm | Point angle: 90° - 140° | Speed: 4800 rpm | Connection: 230 V | Motor power: 0.18 kW | Weight, approx.: 8.1 kg | Dimensions, approx.: 320 x 180 x 190 cm | Characteristics: | - Ideal for grinding HSS / carbide twist drills | - Safe ... » more

new, new | Continuous drilling performance: 25 mm | Normal drilling capacity: 30 mm | Thread cutting capacity: M 16 | Spindle: MK 3 | Drilling depth: 135 mm | Spindle speeds infinitely variable: 150 - 3000 rpm | Table size: 460 x 360 mm | Weight: 225 kg | Mains connection: 400 Volt, 50 Hz | Domestic ... » more

new, new and used | 7 x roll new with 0.37 mx 200 m | per roll 22 Euro, net | 5 x roll used with 0.37 mx 200 m | 15 euros net per roll | 1 roll with 1 m width 35 euros, net | 1 roll of 1.58 m width 40 euros, net | Only while supplies last. » more

new, new | Made in Italy | Center height: 300 mm | Turning diameter over bed: 600 mm | Turning diameter over slide: 380 mm | Tip width: 1,500 mm | Bed width: 400 mm | Spindle bore: 82 mm | Spindle nose: Camlock 8 " | Spindle speeds: (12) 16 - 1200 rpm | Motor power: 9,2 kW (special equipment / standard: ... » more

new, new | Continuous drilling capacity: 25 mm | Normal drilling capacity: 30 mm | Thread cutting capacity: M 14 (option) | Spindle: MK 3 | Drilling depth: 130 mm | Discharge: 250 mm | Spindle speeds stepless: 230 - 2700 rpm | Table size: 460 x 360 mm | Column diameter: 100 mm | Total height: 1800 mm | ... » more

new, new | Cutting area round / square 90 °: 255 mm / 210 x 210 mm | Cutting area flat 90 °: 310 x 210 mm | Cutting area round / square 45 ° R: 220 mm / 210 x 210 mm | Cutting area flat 45 ° R: 220 x 200 mm | Cutting area round / square 45 ° L: 230 mm / 200 x 200 mm | Cutting area flat 45 ° L: 230 x 200 ... » more

new, new | Made in Italy | Machine according to DIN 8606 | Center height: 260 mm | Turning diameter over bed: 520 mm | Turning diameter over slide: 300 mm | Tip width: 1,500 mm | Bed width: 400 mm | Spindle bore: 82 mm | Spindle nose: Camlock 8 " | Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 ... » more

new, new | MCM T 215 x 1000 master lathe | Made in Italy | Machine according to DIN 8605: Lathe with increased accuracy. | Top height: 215 mm | Turning diameter over bed: 430 mm | Turning diameter over slide: 240 mm | Tip width: 1,000 mm | Bed width: 290 mm | Spindle bore: 52 mm | Spindle nose: Camlock ... » more

new, new | Normal drilling capacity: 30 mm | Thread cutting capacity: M 20 (option) | Tightening thread: M 12 | Spindle: MK 3 or SK 30 (option) | Quill stroke: 100 mm | Longitudinal / transverse travel: 350/160 mm | Spindle / cross table distance: 80 to 450 mm | Table surface: 600 x 240 mm | Column ... » more

new, new | Pressure force: 100 tons | Passage between stands: 1000 mm | Piston stroke: 400mm | Piston diameter: 90mm | Maximum pressure: 215 bar | Table width: 635 mm | Max. working height: 930 mm | Forward speed: 10 mm/sec. | Return speed: 14 mm/sec. | Motor power: 4.0 kW | Width: 1640mm | Depth: 800mm ... » more

new, new | Drilling capacity in steel: 32 mm | Drilling capacity in cast iron: 40 mm | Cutterhead max .: 80 mm | Throat: 220 mm | Spindle speed: (12) 75 - 3200 rpm | Spindle support: MK 4 | Quill stroke: 125 mm | Table size: 800 x 240 mm | Travel distance (x / y): 555/225 mm | Milling head can be ... » more

new, new | magnetic chuck | Size: 350*150mm | Also available in size 300 x 150 mm » more

new, new | Machine according to DIN 8605: Lathe with increased accuracy. | Distance between centers: 700 mm | Center height: 170 mm | Swing over bed: 340 mm Ø | Swing over cross slide: 190 mm | Bed width: 260 mm | Displacement longitudinal slide: 600 mm | Displacement cross slide: 220 mm | Displacement ... » more

new, new | Precise, smooth running standard drilling machine, high accuracy and quality. adjustable drilling table via toothed rack and around the column. Motor protection, star grip. Power supply 230 V. | Constant capacity in St 60: 15 mm | Standard capacity: 18 mm | Spindle speeds infinitely: 200 - ... » more

new, new | Roll length: 1250 mm | Sheet thickness max .: 1,25 mm | Roll diameter: 60 mm | Length: 1780 mm | Depth: 550 mm | Height: 1030 mm | Weight: approx 230 kg | Price is net, plus VAT, free house 1 address Germany (without islands). » more

new, new | Hydraulic tube S235JR: 54 x 4 mm | Aluminum tube: 54 x 5 mm | Steel tube: 54 x 2 mm | Stainless steel tube AISI 304/316: 42 x 3 mm | Copper or brass tube: 54 x 4 mm | Gas pipe for pipes: 1 1/2 " | Max. Bending angle: 180 ° | Max. Bending radius: 150 mm | Motor power: 1,1 kW | Voltage: 400V | ... » more

new, new, ready for use | Working Length: 1020mm | Max. Sheet thickness: 2.5 mm | Max. Opening width: 48 mm | Bending angle: 0 - 135 ° | Width: 1350 mm | Depth: 820 mm | Height: 1140 mm | Weight approx .: 285 kg | Characteristics: | - Universal bending machine for plumbing and repair shops | - Robust construction in ... » more

new, new, ready for use | Wheel Ø x W 200 x 32 mm | Wheel bore 32 mm | Grinding wheel grit K 36 / K 80 | Speed ​​2850 U / min | Motor power output S1 100% 0.90 kW | Motor power input S6 40% 1.25 kW | Voltage 400 V | Width 510 mm | Depth 270 mm | Height 310 mm | Weight about 25 kg | Delivery: | Roughing K 36 | Schlicht ... » more

new, ready for use | Bending capacity: 3.5 mm | Bending capacity (VA): 2.5mm | Bending length: 2030 mm | Motor power: 3.7 kW | Basic equipment and features | Upper beam and folding beam driven on both sides via hydraulic | Angle of the upper beam 45 ° | Positioning | Manual folding beam adjustment | Clamping ... » more

new | Cutting width: 520 mm | Cutting height: 310 mm | Working height: 1000 mm | Average speed 1: 25 - 85 m / min | Average speed 2: 120 - 500 m / min | Saw band: 3880 mm | Saw band width: 3 - 16 mm | Table size: 600 x 500 mm | Table - Swivel range (in 4 directions): 15 ° | Motor power: 1.5 kW | ... » more

used, new | Various models from German production, fits various. Machine types | z.B.- bench drills | - Moulders | - Workshop Presses | and much more. » more

new, new | Table size: 1650 x 360 mm | Spindle taper horizontal: ISO 50 | Spindle taper vertical: ISO 50 | Spindle speed Horizontal: (12) 58-1800 rev / min | Spindle speed vertical: (12) 60-1750 rev / min | Longitudinal (x): 1350 mm | Transversal (y): 290 mm | Travel vertical (z): 390 mm | Distance ... » more

new | Force: 10 tons | Piston stroke: 180 mm | Table width: 140 mm | Passage (E): 330 mm | Passage (F): 95 mm | Distance of the Cylinder - Table (F1): 200 mm | Distance of the Cylinder - Table (F2): 365 mm | Cylinder slidably: 180 mm | Width (A): 570 mm | Depth (B): 500 mm | Height 1 (C): 735 mm | ... » more

new | Distance between centers; 1000 mm | Center height: 200 mm | Circumference diameter over bed: 400 mm | Circumference diameter over offset: 560 mm | Circumferential diameter over cross slide: 240 mm | Bed width: 210 mm | Spindle bore: 52 mm | Spindle mount: DIN 55029, D1-5 | Speed ​​range: (12) ... » more

new | Collet diameter min./max.: 3 - 18 mm | Grinding diameter max.: 25 mm | Cone grinding: 0 - 180° | Relief angle: 0 - 45° | Negative angle: 0 - 25° | Speed: 5000 rpm | Cup wheel: 100 x 50 x 20 mm | Indexing positions dividing head: 24 (every 15°) | Motor power: 0.37 kW | Voltage: 400V | Length: ... » more

new, new, ready for use | Drilling capacity max .: 40 mm | Thread cutting max .: M24 | Chuck: 1 - 13 mm / B 16 | Morse taper: MK 4 | Spindle speed: (18) 50-1450 U / min | Feed range: 0.1 / 0.2 mm / rev | Projection: 345 mm | Distance spindle / table max .: 695 mm | Distance spindle / base plate: 1200 mm | Quill ... » more

new, new, ready for use | Cutting length: 2060 mm | Max. Sheet thickness: 3 mm | Cutting angle: 1 ° 30 ' | Strokes / min: 35 | Working height: 805 mm | Hinteransclhag: 750 mm | Table width: 455 mm | Motor power: 4.0 kW | Dimensions (WxDxH): 2620 x 2100 x 1200 mm | Weight approx .: 1710 kg » more

new, new, ready for use | Continuous drilling in St 60: 35 mm | Standard capacity: 40 mm | Tapping capacity: 30 M | Spindle: MT 4 | Feed continuously adjustable: 20 - 400 mm / min | Programmable depth: 175 mm | Projection: 300 mm | Distance spindle / table: 70 to 830 mm | Table size: 550 x 400 mm | Column diameter: ... » more

new, new | Continuous drilling in St 60: 18 mm | Standard capacity: 20 mm | Tapping capacity: M 12 | Spindle: MT 2 | Depth: 100 mm | Projection: 225 mm | Distance spindle / table 55 to 880 mm | Table size: 450 x 315 mm | Column diameter: 90 mm | Overall height: 1,745 mm | Weight: 170 kg | frequency ... » more

new, new | Pressure force: 30 tons | Piston stroke: 150 mm | Table width: 185 mm | Through (E): 530 mm | Through (F): 140 mm | Distance of the Cylinder - Table (F1): 150 mm | Distance of the Cylinder - Table (F2): 1030 mm | Cylinder slidably (M): 200 mm | Width (A): 800 mm | Depth (B): 700 mm | Height 1 ... » more

new, new | Roll Width: 360mm | Track length: 1000 mm | Roller diameter: 60 mm | Height adjustment: 620 - 1055 mm | Maximum load: 500 kg | Standpipe diameter: 50 mm | Approx. weight: 42 kg | Equipment: | - Material stop can be folded up, can be used either on the right or left | - Height-adjustable, ... » more

new, new | Ribbon Dimensions: 75 x 2000 mm | Belt speed: 14.5 / 29 m / sec. | Contact plate Ø x B: 200/80 mm | Sanding table: 460 x 75 mm | Suction Ø 100 mm | Motor power output S1 100%: 2,4 / 3,0 kW | Motor power input S6 40%: 3,0 / 4,0 kW | Voltage: 400 V | Dimensions (L x W x H): 1080 x 440 x 1000 mm ... » more

new, new | Pull force: 50 t | Stroke: 200 mm | Table width: 260 mm | Through (e): 730 mm | Passage (F): 205 mm | Cylinder spacing - table (F1): 75 mm | Cylinder spacing - table (F2): 1050 mm | Cylinder movable (M): 240 mm | Width (A): 1040 mm | Depth (B): 800 mm | Height 1 (C): 1835 mm | Height 2 (D): ... » more

new, new | Constant capacity in St 60: 15 mm | Standard capacity: 18 mm | Tapping capacity: 8 M | Spindle: MK 2 | Drilling depth: 80 mm | Projection: 180 mm | Spindle speeds infinitely 200-4000 U / min | Spindle speeds for threads 200-700 U / min | Distance spindle / table: up to 380 mm | Table area: ... » more

new, new | Sheet thickness max. *: 4.0 mm | Roll center distance: 135 mm | Working depth **: 330 mm | Shaft diameter: 80 mm | Speed: 15 rpm | Motor power: 2.2 kW / 400 V | Depth: 1550 mm | Width: 510 mm | Height: 1200 mm | Weight approx .: 320 kg | * Material strength 400 N / mm² | ** with stop | ... » more

new, new | Drilling capacity max. 30mm | Thread cutting max. M16 | Chuck: 1 - 13 mm / W 16 | Morse taper: MT3 | Spindle speed: (6) 125-2825 rev / min | Projection: 240 mm | Distance spindle / base plate: 655 mm | Quill stroke: 115 mm | Column diameter: 100 mm | Table size / T-slot size: - / 14 mm | Work ... » more

new, new | Spindle: MK 3 | Constant capacity: 25 mm | Standard capacity: 30 mm | Tapping capacity: M20 | Depth: 125 mm | Projection: 260 mm | Distance spindle / table: 90 to 840 mm | Table size: 500 x 365 mm | Column diameter: 110 mm | Overall height: 1,855 mm | Weight: 250 kg | Pole-changing motor 0.8 ... » more

new, new | Spindle: MK 2 | Constant capacity: 14 mm | Standard capacity: 15 mm | Drilling depth: 70 mm | Projection: 180 mm | Distance spindle / table: up to 275 mm | Distance spindle / base plate: 529 mm | Table area: 250 x 220 mm | Column diameter: 65 mm | Overall height: 890 mm | 63 kg | Pole ... » more

new, new | Drilling capacity max .: 40 mm | Tool holder: MK 4 | Speed ​​(spindle): 90-1455 U / min | Projection: 320 mm | Table tiltable: +/- 50 ° | Distance spindle to table max .: 590 mm | Distance spindle to base plate: 1155 mm | Column diameter: 120 mm | Table size: 505 x 425 mm | Worktop base ... » more

new, new | Band dimensions: 150 x 2000 mm | Belt speed: 14.5 / 29 m / sec. | Contact plate Ø x W: 200/155 mm | Plan grinding table: 460 x 150 mm | Suction connection Ø: 100 mm | Motor output power S1 100%: 2.1 / 2.8 kW | Motor power input S6 40%: 2.8 / 3.6 kW | Power: 400 V | Length: 1080 mm | Width: ... » more