Weber Werkzeugmaschinen Mindelheim

used, Very good | X-travel: 600 mm | Y-travel: 560 mm | Z-travel: 560 mm | NC rotary table: 360° | Tool holder: HSK 63 | Spindle speed: up to 15,000 rpm | Compressed air connection: 6 bar | Total power requirement, approx.: 80 kVA | Weight approx.: 10t | Transport dimensions LxWxH, approx.: 4500 x 2400 x 2400 ... » more

used, good | Stroke volume: 1000 l / min | Boiler capacity: 750 l | V-belt profile: 2 x 12.5 x 2625 | Pressure: 10 atm | Oil filling: 3 l | Engine speed: 2800 rpm | Compressor speed: 760 min-1 | Motor power: 7.5 kW | Dimensions, approx.: 3460 x 760 x 1500 mm » more

used, good | Cutting range: ø 180 mm | Cutting angle from / to: 45° / 90° | Vise opening width: 300 mm | Saw band: 300 x 25 x 1.5 mm | Connection: 400V, 0.37KW | Dimensions approx.: 1170 x 700 x 930 mm » more

used, good | Table size: 355 x 255 mm | Travel x/y/z approx.: 400 / 140 / 350 mm | Head swivels: 90° right / left | Cutting speed: 35 - 140 m/min | Connection: 1.2 / 0.8 kW | Dimensions approx.: 1280 x 870 x 1300 mm | Furnishing: | Centric clamping vice, jaw width 160 mm » more

used, good | Passage width: 470 mm | Passage height: 75 mm | Rip fence: 450 mm | Connection: 220 V, 6 A | Motor power: 0.9 kW | Dimensions approx.: 1020 x 750 x 1280 mm | Furnishing: | Analog display » more

used, good | Sheet width: 2040 mm | Steel sheet thickness: 3 mm | Motor power: 7.5 kW | Connection: 400V 16A | Weight : 1800 kg | Dimensions approx.: 2620 x 2050 x 1350 mm » more

used, good | Tool holder: SK40 / M16 | Traverse paths x/y/z: 700 / 450 / 500 | Speed range: (18) 32 - 1600 rpm | Spindle stroke: 125 mm | Feeds: 10 - 500 mm/min | Table size: 1050 x 627 mm | Total motor power: approx. 6.5 kW | Connection: 400V | Weight approx.: 3300 kg | Dimensions approx.: 1900 x 1900 x ... » more

used, good | Working width: 400 mm | Passage height: 20 - 80 mm | Motor power: 0.75W 400V 16A | Dimensions approx.: 1465 x 610 x 1170 mm » more

new | Cutting width: 355 mm | Cutting height: 230 mm | Working height: 960 mm | Table size: 500 x 400 mm | Stepless cutting speed: 20 - 90 m/min | Saw band length: 2840 mm | Saw band width: 3 - 16 mm | Tilt and tilt table in 4 directions: 15° | Motor power: 0.75 kW | Weight approx.: 250 kg | Scope ... » more

new | Beading and flanging machine with hydraulic feed | Sheet thickness max.*: 4.0 mm | Working speed: 5 rpm | Wavelength: 300mm** | Shaft Diameter: 65mm | Engine power: 2.2kW+1.5kW | Connection: 400V | Weight: 460kg | * Material strength 400 N/mm2 | ** without stop | Features: | - Extended range ... » more

new | Beading and flanging machine with manual infeed | Sheet thickness max.*: 2.5 mm | Working speed: 5 rpm | Wavelength: 250mm** | Shaft Diameter: 65mm | Motor power: 1.5 kW | Connection: 400V | Weight, approx.: 410 kg | * Material strength 400 N/mm2 | ** without stop | Features: | - Extended ... » more

new | Cutting width: 520 mm | Cutting height: 310 mm | Working height: 1000 mm | Average speed 1: 25 - 85 m / min | Average speed 2: 120 - 500 m / min | Saw band: 3880 mm | Saw band width: 3 - 16 mm | Table size: 600 x 500 mm | Table swivel range (in 4 directions): 15 ° | Motor Power: 1.5 kW | ... » more

new | Projection: 610 mm | Installation height: 340 mm | Working height: 1015 mm | Table size: 600 x 500 mm | Table size additional table: 220 x 500 mm | Saw band length: 3970 mm | Cutting speed, stepless: 20 - 85 / 120 - 500 m/min | Saw band width: 3 - 16 mm | Table can be tilted in 4 directions: ... » more

new | Cutting width: 1010 mm | Cutting height: 340 mm | Working height: 1000 mm | Table size: 600 x 500 mm | Stepless cutting speed: | 1st gear: 20-85 m/min | 2nd gear: 120 - 500 m/min | Saw band length: 4540 mm | Saw band width: 3 - 16 mm | Tilt and tilt table in 4 directions: 15° | Motor power: ... » more

new | Cutting range around 90°, tube Ø: 95 mm | Cutting area flat 90°, profile: 110 x 65 mm | Cutting range around 45°, tube Ø: 90 mm | Cutting area flat 45°, profile: 85 x 75 mm | Max. saw blade Ø: 315 mm | Motor power: 1.1 / 1.8 kW | Connection: 400V | Weight, approx.: 150 kg | Furnishing: | - ... » more

new | Cutting range around 0°: 150 mm | Cutting area square 0°: 150 x 150 mm | Cutting area flat 0°: 150 x 165 mm | Cutting range around 45°: 115 mm | Cutting area flat 45°: 115 x 130 mm | Cutting range around 60°: 60 mm | Cutting area flat 60°: 70 x 70 mm | Working height approx.: 700 mm | Saw ... » more

new | Cutting range around 0°: 150 mm | Cutting area square 0°: 150 x 150 mm | Cutting area flat 0°: 150 x 165 mm | Cutting range around 45°: 115 mm | Cutting area flat 45°: 115 x 130 mm | Cutting range around 60°: 60 mm | Cutting area flat 60°: 70 x 70 mm | Working height: 700 mm | Saw band ... » more

new | Cutting range around 0°: 127 mm | Cutting area flat 0°: 125 x 130 mm | Cutting range around 45° right: 90 mm | Cutting area square 45° right: 90 x 90 mm | Cutting range around 60° right: 45 mm | Cutting area square 60° right: 45 x 45 mm | Vise opening: 130 mm | Saw band dimensions: 1440 x 13 ... » more

new, new | Bernardo twist drill set 25 pieces. | - 1 -13mm | - 0.5 mm increasing | - HSS TiN - coated » more

used, good | Workspace: | 90° round: 325 mm | 90° square / flat: 300 / 420 x 300 mm | 75° round: 325mm | 75° square / flat: 300 / 350 x 300 mm | 60° round: 325 mm | 60° square / flat: 300 / 330 x 300 mm | 45° round: 220mm | 45° square / flat: 220 / 300 x 300 mm | Cutting angle from / to: 17 - 100 m / min, ... » more