Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Tool grinding machines (55 Offers)

RSS
Order by:
  • new | Grinding range: max. 30 mm | Angle adjustable from - to: horizontal 0-180 degrees | Angle adjustable from - to: vertical 0-45 degrees | Angle adjustable from - to: negative 0-52 degrees | Connected load: 230 V | Disc diameter: 100 mm | Machine weight approx .: 55 Kg | Dimensions L x W x H: ... » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MAKE Schneeberger | TYPE NORMA CFG | YEAR 2007 | SPECIFICATIONS | Controll Fanuc | Cylindical / Surface / Other 5 Axis Tool grinder | Grinding length C = 340 Gr mm | X - Travel X = 380 mm | Y - Travel Y = 280 mm | Z - Travel Z = 280 mm | Electro magnetic table A = 360 Gr ... » more

    Manufactured
    2007
    Price
  • used | Grinding diameter - max .: 125 mm | Cutting speed: 20 m/sec | Grinding motor speeds up to: 3360 rpm | Clamping diameter max.: 150 mm | Height: 26mm | Machine weight approx .: 300 kg » more

    Manufactured
    1999
    Price
  • used, well used | Specifications: | - Grinding wheel diameter approx. 175 mm | - Disc speeds 2820 rpm | - Support table on the left, height-adjustable + laterally movable + rotatable | - lighting | - Drive 400 V / 0.75 kW | - Space requirement approx. W 1050 x H 1350 x D 650 mm | - Weight about 120 kg » more

    Manufactured
    1991
    Price
  • used, good | Type: GU-B | Producer: LINDNER | Grinding diameter: 250 mm | Max. Grinding length: 250 mm | Thread pitch: 60 mm | Motor power: 8 kW | Machine weight: 3000 kg | Equipment: | Wheelhead | 200 grinding wheels | 80 flanges » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MAKE Schneeberger Swiss | TYPE Gemini DMR | YEAR 2004 | SPECIFICATIONS | Controll Fanuc 160i MB | Cylindical / Surface / Other 5 axis tool grinder | Grinding diameter Ø C = 240 Gr mm | Grinding length X = 400 mm | X - Travel Y = 300 mm | Y - Travel Z = 280 mm | Z - Travel ... » more

    Manufactured
    2004
    Price
  • new | Grinding range: 2 - 20 mm | Min./max acute angle: 90 - 135 degrees | Connected load: 230 V | Machine weight approx .: 8.6 kg | Space required: 0.35 x 0.2 x 0.2 m » more

    Manufactured
    Price
  • used | Workpiece diameter: 110 mm | Grinding length: 410 mm | Clamping length: 20 mm | Total power requirement: 0,25 kW | Machine weight approx: 500 kg | Dimensions of the machine ca: m » more

    Manufactured
    1994
    Price
  • used, Very good Condition | Make Klingel | Type BSA 50 | Year 1993 | drill grinder Bohrschleiffer | Grinding length (mm) Diam min = 3 mm | Grinding width (mm) Diam max = 50 mm | Grinding height 2 - 3 ( 4 - 6 ) edge | Wheel diameter (mm) Speed 8 - 60 Min. | TOP Condition ! | www.mach4metal.com » more

    Manufactured
    1993
    Price
  • used | Drill diameter: 40 mm | Speed: 2800 r / min | Point angle: 60 - 180 ° | Relief angle: 3.0 - 25 ° | Tool length - max .: 344 mm | Total power requirement: 0,85 kW | Weight of the machine ca .: 238 kg. | Dimensions L-W-H: 0.86 x 0.66 x 1.19 m | Electrical 380 Volt: | Underframe with suction: | ... » more

    Manufactured
    Price
  • new | Collet diameter min./max.: 3 - 18 mm | Grinding diameter max.: 25 mm | Cone grinding: 0 - 180° | Relief angle: 0 - 45° | Negative angle: 0 - 25° | Speed: 5000 rpm | Cup wheel: 100 x 50 x 20 mm | Indexing positions dividing head: 24 (every 15°) | Motor power: 0.37 kW | Voltage: 400V | Length: ... » more

    Manufactured
    Price
  • used | - Grinding wheel diameter approx. 125 mm | - 2 disc speeds 1450/2200 rpm | - Right, - Left rotation | - Tilting fixed support table ATF 340 x 150 mm | - Support table can be tilted -5 ° to + 15 ° | - lighting | - 400 V / 0.65 / 0.9 kW drive | - working height 1000 mm | - Space requirements ... » more

    Manufactured
    1988
    Price
  • used | Grinding diameter - max: 400 mm. | Grinding width: 0 mm | Module - max. | Module - min. | Total power requirement: 3 kW | Machine weight approx: 4,2 t | Dimensions of the machine ca: m » more

    Manufactured
    1977
    Price
  • used | Grinding diameter - max: 300 mm. | Grinding length: 500 mm | Workpiece length: mm | Number of axes: 6 pcs | Center height: 220 mm | Distance between centers: 500 mm | x-axis: 500 mm | y-axis: 320 mm | z-axis: 320 mm | Total power requirement: 5 kW | Machine weight ca .: t | Dimensions of the ... » more

    Manufactured
    1989
    Price
  • new | Grinding range: 8 - 32 mm | Pointed angle min./max .: 90 - 140 degrees | Connected load: 230 V | Weight of the machine approx .: 16 kg | Space requirement approx .: 0.43 x 0.24 x 0.24 m » more

    Manufactured
    Price
  • new | Grinding range: 2 - 13 mm | Pointed angle min./max .: 90 - 140 degrees | Connected load: 230 V | Machine weight approx .: 10 kg | Space required: 0.35 x 0.2 x 0.2 m » more

    Manufactured
    Price
  • new | Grinding range: 2 - 20 mm | Min./max acute angle: 90 - 135 degrees | Connected load: 230 V | Machine weight approx .: 8.6 kg | Space required: 0.35 x 0.2 x 0.2 m » more

    Manufactured
    Price
  • used | Drill diameter: 2 - 26 mm | Speed: 2800 r / min | Total power requirement: 0,75 kW | Machine weight approx .: 190 kg | Dimensions L-W-H: approx. 1200 x 800 x 1400 mm | Electrical 380 Volt: | Coolant system: | Grinding wheel: | Lining: 6 jaws » more

    Manufactured
    1985
    Price
  • used | Grinding diameter - max: 320 mm. | Grinding length: 500 mm | Workpiece length: 700 mm | Total power requirement: 10 kW | Machine's weight about 4 t | Dimensions of the machine ca: m » more

    Manufactured
    1989
    Price
  • used, Sehr gut erhalten , Top Condition | MAKE Schneeberger Swiss | TYPE GEMINI | YEAR 2006 | SPECIFICATIONS | Controll Fanuc 160i MB | Cylindical / Surface / Other 5 axis tool grinder | Grinding diameter Ø C = 240 Gr mm | Grinding length X = 400 mm | X - Travel Y = 300 mm | Y - Travel Z = 280 mm | Z - Travel ... » more

    Manufactured
    2006
    Price
  • new | Grinding range: 2 - 13 mm | Pointed angle min./max .: 90 - 140 degrees | Connected load: 230 V | Machine weight approx .: 10 kg | Space required: 0.35 x 0.2 x 0.2 m » more

    Manufactured
    Price
  • used, used | 4 - station tool grinding machine | Pre-grinding - disc 200 x 50 x 5 1mm - table size 400 x 200 mm | Regrinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm | Lapping grinding - disc / diamond 125 - 12.5 x 51 mm - table size 400 x 200 mm | Chip breaker - disc -150 x 8 x 51 mm | Coolant ... » more

    Manufactured
    1985
    Price
  • used | Grinding diameter - max .: 260 mm | Grinding length: 500 mm | Workpiece length: 500 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    1980
    Price
  • used | Sheet width: 3100 mm | Plate thickness: 4 mm | Oil content: 80 l | Total power: 7,5 kW » more

    Manufactured
    1987
    Price
  • used | Sheet width: 3050 mm | Plate thickness: 16 mm | Cutting angle: 1-4 ° | Oil quantity: 400 l | Connected load: 24 kW | Dimensions: 4400x2300x2200 mm | Weight: 9200kg » more

    Manufactured
    1997
    Price
  • used | Grinding diameter - max .: - mm | Grinding length: - mm | Workpiece length: - mm | Control: NUM 1060 | Machine weight approx .: 4,2 t | Space requirement approx.: 2850 x 2525 x 2867 mm » more

    Manufactured
    1997
    Price
  • used, Sehr gut erhalten , Top Condition | MAKE Schneeberger | TYPE GEMINI DMR | YEAR 2007 | SPECIFICATIONS | Controll FANUC 160i MB | Cylindical / Surface / Other 5 Axis Tool grinder | Grinding length C = 240 Gr mm | X - Travel X = 400 mm | Y - Travel Y = 300 mm | Z - Travel Z = 280 mm | Electro magnetic table ... » more

    Manufactured
    2007
    Price
  • used, Generally outdated | Agathon 175 steel grinding machine carbide grinding machine | TOP CONDITION | Generally overhauled down to the smallest detail (photos). | Original condition and parts, entire mechanics work perfectly | All grinding settings are available and easy to use | Very quiet engine. | Signs of wear ... » more

    Manufactured
    Price
    1.900 EUR
  • used » more

    Manufactured
    Price
  • new, new | Technical specifications: | Drill diameter: 13 - 32 mm | Point angle: 90° - 140° | Speed: 4800 rpm | Connection: 230 V | Motor power: 0.25 kW | Weight, approx.: 28 kg | Dimensions, approx.: 490 x 250 x 260 mm | Characteristics: | - Ideal for grinding HSS / carbide twist drills | - Safe ... » more

    Manufactured
    Price

Search marketplace