Offer of a used machine in coil-/ strip processing lines
max. grinding diameter: 150 / 20 mm
grinding length: 340 mm
workpiece length: 500 mm
Control: FANUC 31iB5
workpiece dia.: 250 mm
workpiece weight max.: 50 kg
taper: DIN 69871 SK 50
spindle speeds (infinitely variable): 1000 - 8000 U/min
x-axis: 340 mm
y-axis: 240 mm
z-axis: 240 mm
Working speed: 10 m/min
A-axis: 360 °
c-axis: 197 °
grinding spindle drive: 7,1 kW
total power requirement: 12 kW
weight of the machine ca.: 3,3 t
dimensions of the machine ca.: 2,4 x 2,2 x 2,55 m
Basic configuration of the machine:
-incl. connector for connection of external equipment (KLMA and oil mist cutter)
-incl. remote software
-incl. direct grinding spindle drive
-incl. electronic measuring probe
-incl. electronic handwheel
-incl. central lubrication
-incl. standard accessories
- Grinding wheel changer 6-fold with tilting function for automatic changing of
HSK-50F grinding wheel fixtures pneumatically supported for six
up to 3 grinding wheels per grinding wheel holder.
grinding wheel holder.
- Direct measuring system in X-, Y-, Z-axis
- Position resolution: 0.00005 mm
- Control panel S20 F3+ without touch function
- Switch cabinet cooling (active cooling unit)
- Special software surface grinding
- Stainless steel drip tray for S20+ 1960x1750 mm / 65 kg
- Stainless steel drip tray for RC 1250 2x 8 l / 920x 1220 mm / 20 kg
- Signal column with LED technology with acoustic signal indicates the status
of the
machine.
- Special robot cell RC1250 for S20+
- 6-axis robot type FANUC LR Mate 200iD: - incl. control R-30iB
- max. payload: 5 kg
- reach: 704 mm (without robot hand)
- defined interfaces to the grinding center S20+
- simulation adapter for robot RC 1250
- loading flap for S20+
- special robot hand with double gripper for loading cell RC 1250
- automatic fire extinguishing system
- coolant ring on grinding head
- dividing head nozzle 300 mm
- leak sensor for drip tray
- pneumatic clamp for hydraulic expansion chuck S20
- Hydraulic expansion chuck SK50/Ø20 (automatic)
- Special intermediate bush Ø20 mm - clamping Ø 10 mm
- mounting L106,D35,B8-32
- stronger lifting pump with level switch for S20
- Oil mist separator LTA (left version)
- coolant ultra-fine filter system Knoll type Mocropur 120 F:
- tank approx. 550l
- Coolant pump 80l/min at 8 bar / 4 kW
- filter capacity max. 120 l/min
- incl.cooling unit integrated - plate heat
exchanger
- magnetic roller
- plug external equipment: - robot RC 1200 / RC 1250
- coolant unit
- suction
workpiece diameter with counter tip: ca.125 mm
workpiece length with counter tip: ca.250 mm
The technical data has been created to the best of our knowledge, but we cannot
assume any liability for it.
<small>The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.</small>
Subject to alterations and errors in the technical datas, specifications and pricing and subject to prior sale.
Short Link to this page: https://www.blechzulieferer.com/67048/offer
Vendor
IMZ Maschinen Vertriebs GmbH
Marie - Curie - Straße 19
73529 Schwäbisch Gmünd
(Germany)
Contact person: Herr Wamsler
Phone: 07171-987130
Telefax: 07171-98713-29