Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Search marketplace

Section bending machines (133 Offers)

RSS
Order by:

  • GLASER GDM 3-0 + GBR 666 Motorized bar steel twisting machine + ring and arch bending machine

    used, good | Offer 24126 | Specifications: | - Bending process motorized with automatic or manual operation | - Bending capacity for square iron ST 37 up to approx. 30 mm | - Bending capacity for flat iron ST 37 up to approx. 30 x 8 mm | - Bending length between the twisting units adjustable up to approx. ... » more

    Manufactured
    1984
    Price
    –

  • DURST Motorized profile iron bending machine

    used, well used | Technical data approx.: | - motor-driven upper roller | - manual. Middle roller feed | - both bottom rollers adjustable horizontally | - shaft diameter approx. 60 mm | - useful shaft length approx. 120 mm | - working speed in one step | - bending performance approx.: | - - L. and T – iron ... » more

    Manufactured
    1960
    Price
    –

  • Thoman RB 3 NC Profilbiegemaschine , Section Bender

    used, Sehr gut erhalten , Very good Condition | Make Thoman RB3 | Type RB-3 NC | Year 2003 | NC linear path control | Outside diameter max. (mm) Shaft = 65 | Inside diameter max. (mm) Roll = 200 | Max. pipe length (mm) X axis = 250 | Max. angle Force = 25 Ton | Wall Thickness (mm) Speed = 0 - 16 M | Section modus = 60 cm3 | 3 roll s driven ... » more

    Manufactured
    2003
    Price
    –

  • PBT 25 PC 300 Section Bender, Profilbiegemaschine

    used, Sehr gut erhalten , Top Condition | MACH-id 4183 | MAKE PBT Swiss | TYPE 25 | YEAR 2012 - 1097 Hours | SPECIFICATIONS | Hydraulic / Mechanical Hydraulic | Horizontal / Vertical / or H + V Horizontal | Shaft Diameter ø 105 mm | Shaft length 300 mm | Working speed M/Min. 1 - 24 M/Min | ... » more

    Manufactured
    2012
    Price
    –

  • PBT Indumasch 25 PC 200 Profil Biegemaschine

    used, Sehr gut erhalten, Very good Condition | Make PBT 25 PC200 | Type INDUMASCH 25 | Year 2003 | Touchscreen PC 200 | Outside diameter max. (mm) Cap X = 27 Ton | Inside diameter max. (mm) Stroke = 265 mm | Max. pipe length (mm) Shaft = 105 mm | Max. angle 3 x 1,1 kW driven | Wall Thickness (mm) Speed - 1 - 24 M/min | Interpolation ... » more

    Manufactured
    2003
    Price
    –

  • MG AR 140 Profile Bender ,Section bender, Profilbiegemasch

    used, Sehr gut erhalten , Top Condition | Roll diameter 390 mm | 2 sets off rolls included | Hydraulic side support Left & Right | Manuel or NC-Cycle controlled | Horizontal and vertical:Yes, Horizontal + Vertical | Shaft Ø: 140mm | Number of rolls: 3 | Stroke X-Axis: 400mm | Resistance moment: ... » more

    Manufactured
    2007
    Price
    –

  • OSTAS OPK 65 Profile ring bending machine

    new | Solid round material: 50 (500) mm | Square material: 45 (500) mm | Angle steel: 80 x 80 x 8 (800) mm | T - steel bridge to the outside: 80 x 9 (800) mm | Axis diameter: 60 mm | Working speed: 5.0 m / min | Tool diameter: 195 mm | Total power requirement: 3 kW | Machine weight approx .: 1,0 t ... » more

    Manufactured
    –
    Price
    –

  • THOMAN ME 112 Mot. Stabstahlverdrehmaschine

    used | - Bending mot. With automatic or manual operation | - Bending capacity square steel ST 37 up to approx. 25 mm | - Bending capacity flat steel ST 37 up to approx. 30 x 8 mm | - Bending length between twisting units adjustable up to approx. 1000 mm | - Faceplate with div. Recording profile ... » more

    Manufactured
    1985
    Price
    –

  • Sahinler HPK 120 Vert. + Horz. Profile Bender

    used, Gut erhalten | Make Sahinler 120 | Type HPK 120 | Year 11 - 1999 | Horizontal vertical profile bender | Outside diameter max. (mm) Shaft = 120 mm | Inside diameter max. (mm) Roll = 390 mm | Max. pipe length (mm) IPN 200 x R 1.000 | Max. angle HEB 300 x R 1200 | Wall Thickness (mm) Tube 140 x 3 | 2 x Hydr. ... » more

    Manufactured
    1999
    Price
    –

  • Roundo R 5 S Section bender, Profil Biegemaschine

    used, Sehr gut erhalten, Very good Condition | Make Roundo R 5 S | Type R 5 S | Year 1989 | Section modus 48 cm3 | Outside diameter max. (mm) Roll = 385 mm | Inside diameter max. (mm) Power 7.5 kW | Max. pipe length (mm) Flatt 100 x 30 | Max. angle U over Y = 200 | Wall Thickness (mm) U over X = 100 | Speed 0 - 7 M/min. | Set with rolls | ... » more

    Manufactured
    1989
    Price
    –

  • SAF BS 50 H Profil Biegemaschine, Profile Bender

    used, Sehr gut erhalten, Very good Condition | Make SAF BS 50 H | Type BS - 50 - H | Year 1996 | 3 roll profile bender | Outside diameter max. (mm) Shaft = 40 mm | Inside diameter max. (mm) Upper roll = 137 | Max. pipe length (mm) Lower roll = 147 | Max. angle Power 3 kW | Wall Thickness (mm) 60,3 x 3,2 x R 400 | 4 sets off tooling | ... » more

    Manufactured
    1996
    Price
    –

  • PBT 35 Profile Bender ,Section bender, Profilbiegemaschine

    used, Sehr gut erhalten , Top Condition | MACH-id 5561 | MAKE PBT | TYPE 35 | YOP 2007 | SPECIFICATIONS | Shaft Ø 105 mm | Number of rolls 3 | Stroke X-Axis 390 mm | DIMENSIONS | Length 2000 mm | Width 1860 mm | Height 1420 mm | Weight 2500 kg | ... » more

    Manufactured
    2007
    Price
    –

  • BPR C 403 ME1 Profilbiegemaschine Profile Bender

    used, Very good Condition | Make BPR C403 ME | Type C 403 ME | Year 90 er | profile bender | Sheet thickness (mm) Shaft = 40 | Bending length (mm) Roll = 152 | Number of rolls 3 rolls | incl. set extra rolls | www.mach4metal.com » more

    Manufactured
    1990
    Price
    –

  • Roundo R 5 S Profielbiegemaschine

    used, Sehr gut erhalten, Very good Condition | Make Roundo R 5 S | Type R 5 S | Year 1989 | Section modulus 50 cm3 | Outside diameter max. (mm) Top shaft = 140 mm | Inside diameter max. (mm) Lower shaft = 120 | Max. pipe length (mm) Rolls = 360 | Max. angle Power = 11 kW | Wall Thickness (mm) Weight 4000 Kg | Tube = 142 x 1.800 mm | HEA = ... » more

    Manufactured
    1989
    Price
    –

  • PBT 35 mit PC 200 Touch Section Bender, Profilbiegemaschine

    used, Sehr gut erhalten , Top Condition | MAKE PBT Swiss | TYPE 35 | YEAR 2004 | SPECIFICATIONS | Hydraulic / Mechanical Hydraulic | Horizontal / Vertical / or H + V Horizontal | Shaft Diameter ø 105 mm | Roll diamter ø Stroke = 390 mm | Shaft length Adj = 360 - 1100 mm | Working speed M/Min. 1 - 16 M/Min | ... » more

    Manufactured
    2004
    Price
    –

  • PBT Arkus 12 + PC 200 Profile Bender ,Section bender, Profilbiegemasch

    used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Hydraulic / Mechanical Hydraulic | Horizontal / Vertical / or H + V Horizontal | Shaft Diameter ø 40 mm | Shaft length 130 mm | Working speed M/Min. 1 - 32 M/Min | Resistance moment Cm 3500 Nm Cm3 | Capacity IPN IPE 80 x R 500 mm | Capacity HEB UNP 80 x R 400 mm ... » more

    Manufactured
    1999
    Price
    –

  • Sahinler HPK 120 Profil Biegemaschine, Profile Bender

    used, Sehr gut erhalten, Very good Condition | Make Sahinler HPK120 | Type HPK 120 | Year 1999 | Hor. + Vert. Profile bender | Outside diameter max. (mm) Shaft = 120 | Inside diameter max. (mm) Roll = 390 | Max. pipe length (mm) Speed = 2 - 7.5 | Max. angle Power = 15 kW | Wall Thickness (mm) Incl. 2 axis Dro | Incl. extra rolls | ... » more

    Manufactured
    1999
    Price
    –

  • Comac Galileo 40 Profilbiegemaschine , Section Bender

    used, Sehr gut erhalten , Very good Condition | Make Comac Galileo 40 | Type Galileo 40 | Year 2011 | Profile bender comac galileo 40 | Outside diameter max. (mm) Section modus 6 cm3 | Inside diameter max. (mm) Shaft diam = 45 | Max. pipe length (mm) Roll diam = 145 | Max. angle Speed = 3,7 M/min | Wall Thickness (mm) Tube 70 x 2 x 2000 | ... » more

    Manufactured
    2011
    Price
    –

  • HAEUSLER HPR8V-H SPEZ Profile ring bending machine

    used | Axle diameter: 95 | Double T-iron over x-axis: mm | U-iron over x-axis: mm | T - steel - web to the outside: mm | U - Steel - Flange: | Angle iron/leg length: mm | Square steel: mm | Peripheral speed: m/min | Total power requirement: KW | Machine weight approx: 3,5 t | Space requirement ... » more

    Manufactured
    1966
    Price
    –

  • Roundo 4 R - 6 - S Profilbiege , Section Bender

    used, Sehr gut erhalten, Very good Condition | Make Roundo 4 R6S | Type 4 R - 6 - S | Year 2009 | Roundo 4r6S profilebender profilbiege profielwals | Sheet thickness (mm) Roll = 440 | Bending length (mm) Shaft = 180 | Number of rolls Moment 90 cm3 | 4 roll profile bender | CNC: wCNC2 CNC Control | Top support | Type S = Hydr. side support ... » more

    Manufactured
    2009
    Price
    –

  • AK BEND APK 81 Ring profile bending machine

    new | I-Steel - upright: 100 x 20 (d 2100) mm | Raw diameter max .: 100 x 3 (d 3000) mm | Angle steel: 80x80x8 (d 2000) mm | Square material: 50 x 25 x 2 (d 600) mm | I - steel - flat: 120 x 30 (d 600) max.140b mm | Solid material diameter: 60.0 (d 1000) mm | Tool holder: 80.0 mm | Speed: 4.2 m / ... » more

    Manufactured
    –
    Price
    –

  • Roundo R3 Profil Biegemaschine

    used, Good Condition | Make Roundo R3 | Type R 3 Profile bender | Year 1985 | Roundo R 3 Horizontal and vertical profile bender | Outside diameter max. (mm) Angle 75 x 75 x 7 | Inside diameter max. (mm) IPE 140 x 700 | Max. pipe length (mm) Shaft 75 mm | Max. angle Rolls 225 mm | Wall Thickness (mm) Cap. 14 cm3 | ... » more

    Manufactured
    1985
    Price
    –

  • Roundo R 2 Section Bending machine , Profilbending machine

    used, Sehr gut erhalten, Very good Condition | Make Roundo R2 | Type R 2 | Year 1995 | roundo r2 section bending machine R-2 | Outside diameter max. (mm) Roll = 188 | Inside diameter max. (mm) Shaft = 65 | Max. pipe length (mm) Modulus = 7 cm3 | Max. angle Power = 2,2 kW | Wall Thickness (mm) 3 rolls drive | 60 x 60 x 6 x 600 mm | Optical ... » more

    Manufactured
    1995
    Price
    –

  • KNUTH KPB 30 Mot-ring arc bending machine

    used, good | Specifications: | - 2 motor driven rollers | - manual. Delivery of the top roller | - Shaft diameter 30 mm | - Shaft rotation 6 rpm | - Roller diameter 132 mm | - Bending performance - flat steel on edge 50 x 10 mm | - flat 80 x 15 mm | - Square 30 mm | - Square tube 50 x 50 mm | - Round tube ... » more

    Manufactured
    1997
    Price
    –

  • Roundo R 5 S Profile Bender ,Section bender, Profilbiegemasch

    used, Sehr gut erhalten , Top Condition | Make Roundo R 5 S | Type R5S | Year 80 er | Horizontal vertical profile bender | Sheet thickness (mm) Roll = 385 | Bending length (mm) Section = 48 cm3 | Number of rolls U over X = 100 | U over Y = 200 | Speed = 0 - 7 M/min | Remote control | www.mach4metal.com » more

    Manufactured
    1980
    Price
    –

  • ZOPF C-602-HE Ring profile bending machine

    used | I - steel - flat: 120 x 25 (d 400) mm | I-steel - upright: 80 x 15 (d 600) mm | Angle steel: 70x70x7 (d 800) mm | Round material: 50.0 (d 600) mm | Max. raw diameter: 100 x 2.0 (d 1800) mm | Square material: 70x70x3 (d 1400) mm | Bending speed: 6.0 rpm | Roller diameter - top: 215 mm | Stroke ... » more

    Manufactured
    2000
    Price
    –

  • Comac 304 HV Profile Bender ,Section bender, Profilbiegemasch

    used, Sehr gut erhalten , Top Condition | Horizontal and vertical:H + V | Shaft Ø: 60mm | Number of rolls: 3 | Resistance moment: 10CM³ | Capacity flat: 70 x 12 x R 600 mm | Capacity Tube: 76,1 x 2,9 x R 1200 Ø x mm | Capacity bar: 40 x 40 x R 600 mm | Capacity T-Profile: 70 x 70 x ... » more

    Manufactured
    2001
    Price
    –

  • PBT Arkus 12 PC 100 Section Bender, Profilbiegemaschine

    used, Sehr gut erhalten , Top Condition | MACH-id 4189 | MAKE PBT Swiss | TYPE ARKUS 12 | YEAR 90 er | SPECIFICATIONS | Controll PC 100 | Hydraulic / Mechanical Hydraulic | Capacity Ø x plate thickness 60 x R 600 mm | Press force 12 Ton | Stroke 200 mm | Table size Length x Width ... » more

    Manufactured
    1990
    Price
    –

  • AK BEND APK 101 Ring profile bending machine

    new | I-steel - portrait: 120 x 25 (d 1600) mm | Maximum raw diameter: 140 x 3 (d 3000) mm | Angle steel: 100x100x10 (d 1600) mm | Square material: 140 x 40 x 3 (d 4000) mm | I - steel - flat: 200 x 35 (d 1000) mm | Solid material - diameter: 70.0 (d 800) mm | Tool holder: 100.0 mm | Roller Ø: 315 ... » more

    Manufactured
    –
    Price
    –

  • IMCAR RAD PIR Profile Bender ,Section bender, Profilbiegemasch

    used, Sehr gut erhalten , Top Condition | IMCAR - RAD PIR | Pyramidal Straightening Machine Flange ø 309mm x 100mm | MACH - ID 6356 | Make: IMCAR | Type: RAD PIR | YOP: 1999 | Horizontal and vertical Horizontal | Shaft Ø 130 mm | Number of rolls 3 | Working speed 0 - 5 mm | Flange ext. ø 309mm, thickness 18mm (material ... » more

    Manufactured
    1999
    Price
    –

alle 133 Einträge anzeigen

Search marketplace