Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Screw presses (20 Offers)

RSS
Order by:
  • used | +++ ATTENTION !!! | +++ Everything is getting more expensive, we have reduced a lot!!! | +++ The prices are temporarily reduced by 30%!!! | +++ Please also note our other auctions | Two pronged hand screw press | Hiller & Lutz HILU HP 70 | Make: Hiller & Lutz | Type: HILU HP 70 | Machine No ... » more

    Manufactured
    Price
    1.855 EUR
  • used | Max. Pressing force: 25 t | Table size: 500 x 430 mm | Bear size: 500 x 200 mm | Installation height: 430 mm | Spindle diameter: 70 mm | Weight approx .: 950 kg | External dimensions approx .: 1450 x 1450 x 1900 mm » more

    Manufactured
    1963
    Price
  • used | Pressure: 20 t | Passage between the uprights: 335 mm | Installation height: 400 mm | Spindle diameter: 75 mm | Column diameter: 80 mm | Table :: 330 x 300 mm | Weight of the machine ca .: 450 kg | Dimensions L-W-H: 950 x 650 x 2100 mm | Various tools: » more

    Manufactured
    1977
    Price
  • used | +++ ATTENTION !!! | +++ Everything is getting more expensive, we have reduced a lot!!! | +++ The prices are temporarily reduced by 30%!!! | +++ Please also note our other auctions | Two pronged hand screw press | Ageo SP 28/510 | Make: Ageo | Type: SP 28/510 | Machine No .: 1082 | ... » more

    Manufactured
    Price
    2.275 EUR
  • used | Capacity: 40 t | Table area: 650 x 550 mm | Installation height: 440 mm | Column passage: 650 mm | Column passage at the side: 200 mm | Ram area: 580 x 250 mm | Tappet bore: ø 50 mm | Spindle diameter: 95 mm | Ram stroke: 345 mm | Table height above floor: 690 mm | Number of columns: 4 | ... » more

    Manufactured
    1966
    Price
  • used | - max.pressing force 20 t | - max.stroke stroke approx. 180 mm | - max.installation height approx. 230/310 mm | - Distance between columns approx. 380/125 mm | - Table support surface with 4 diagonal T-slots 380 x 320 mm | - Upper tool holder 35 mm | - Through hole in the table 80 mm | - ... » more

    Manufactured
    1970
    Price
  • demonstration machine | General: | Table surface 350 x 260 mm | Table diameter 230 mm | Spindle movement max. 550 mm | Pressure capacity 50 kN | Weight 195 kg » more

    Manufactured
    2020
    Price
  • used, little used for old age | Pressure force: 140 t | Spindle Ø: 140 mm | Table support surface: 650 x 650 mm | Ram area: 545 x 400 mm | Large distance between table and ram: 700 mm | Drive motor: 380 V, 11 kW | Weight: 5500kg » more

    Manufactured
    1980
    Price
  • used | Diameter: 130mm | Cutting (number): . 0 | Mass: . kg | SK50: SK50 recording | Length: 400 mm » more

    Manufactured
    Price
  • used | Pressing force approx.: 10 t (estimated) | Handwheel diameter: 800 mm | Projection between the uprights: 400 mm | Table size: 350 x 440 mm | Hole in the table Drm. : 100 mm | Ram: 130 x 110 mm | Installation height: 300 mm | External dimensions L x W x H: 900 x 500 x 1780 mm » more

    Manufactured
    Price
  • used | Diameter:. mm | Cutting (number): . 0 | Mass: . kg » more

    Manufactured
    Price
  • used | Installation height: 240 mm | Clamping table: 335 x 405 mm | Pivot hole (depth x diameter): 70 x Ø 60 mm | Press force: 18.0 tons | Projection: 185 mm | Total power requirement: man. | Dimensions L-W-H: 800 x 800 x 1650 mm » more

    Manufactured
    Price
  • used | Press force: 250 t | Spindle diameter: 160 mm | Ram stroke range: 180 mm | Lifting speed: 71 strokes / min | Stator passage: 450 mm | Table surface: 560x450 mm | Ram surface: 450x400 mm | Total power requirement: 12 kW | Machine weight approx .: 9 t | Dimensions of the machine ca: m » more

    Manufactured
    1969
    Price
  • used | Capacity: 25 t | Passage between columns: 330 mm | Installation height: 340 mm | Spindle diameter: 70 mm | Table size: 380 x 390 mm | Spindle: 200mm | Ram surface: 60 x 60 mm | Weight of the machine ca .: 450 kg | Dimensions approx .: 0.8 x 0.7 x 2.2 m » more

    Manufactured
    Price
  • used | Diameter:. mm | Cutting (number): . 0 | Mass: . kg » more

    Manufactured
    Price
  • used | Max. Printing capacity: 20 t | Passage: 340 mm | Table size: 250 x 620 mm | Stroke: 200 mm | Spindle diameter: 60 mm | Column diameter: 70 mm | Ram area: 330 x 110 mm | Installation height: 260 mm | With | - base » more

    Manufactured
    1957
    Price
  • used | Capacity: 10 t | Passage between the stands: 425 mm | Installation height: 380 mm | Spindle diameter: 50 mm | Weight of the machine ca .: 200 kg | Space required: 1.3 x 0.8 x 2 m » more

    Manufactured
    Price
  • used | Max. Pressing power: 25 t | Table size: 540 x 400 mm | Bärgröße: 420 x 200 mm | Spindle diameter: 70 mm | Stroke: 180 mm | External dimensions approx .: 1200 x 1200 x 2000 mm | hand, despite the year of construction in good condition » more

    Manufactured
    1953
    Price
  • used | Capacity: 6 t | Installation height: 180 mm | Spindle diameter: 32 mm | Projection: 115 mm | Ram stroke: 90 mm | Table area: 300x270 mm | Machine weight approx .: 70 kg | Dimensions approx .: 800 x 1350 mm » more

    Manufactured
    Price
  • used, Very Good general condition | HANSPINDEL PRESS METALWAG SP 20 13-13-016 | Delivery time: immediately | Number: 13-13-016 | Manufacturer: Metalwag | Type: SP 20 | MACHINE DATA | Year of construction: approx. 1985 | L x W x H: approx. 1200 x 1200 x 1800 mm | Weight: about 450 kg | Good general condition | TECHNICAL ... » more

    Manufactured
    1985
    Price

Search marketplace