Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Pipe bending machines (106 Offers)

RSS
Order by:
  • used, Sehr gut erhalten , Top Condition | Capacity Ø x plate thicknessTube 6 - 42 mm mm | - incl. internal & external deburring | - incl. sawing unit | - incl. large tooling package | www.mach4metal.com » more

    Manufactured
    1989
    Price
  • new | Bending capacity for steel tubes: 63x4.2 mm | Outside diameter: min. Ø 5 mm | Bending radius min .: 10 mm | Bending radius max .: 270 mm | Bending angle: max. 210 ° | Bending direction: counter clockwise | Total power requirement: 0,75 kW | Machine weight approx .: 130 kg | Space required: ... » more

    Manufactured
    Price
  • used | Performance range: 6 - 48 mm | Mandrel length: 6.0 m | Max. Flexibility massive: 35 x 35 mm | Max. Pipe wall thickness: 3.0 mm | Operating pressure: 200 bar | Drive power: 1.5 kW | Total engine power: 5.5 kW | With | - Pipe turning device | - 2 tool sets 33.7 + 48.3 mm | little used, in very ... » more

    Manufactured
    1999
    Price
  • used, Sehr gut erhalten , Very good Condition | Make Transfluid 76x3 | Type DB 2076 ST - SPS | Year 2005 | SIEMENS SPS | Outside diameter max. (mm) Tube 76 x 3,0 mm | Inside diameter max. (mm) Angle 180 + 10 | Max. pipe length (mm) Max L = 6.096 mm | Max. angle 3e Dimensions | Wall Thickness (mm) 500 Tiubes 20 steps | Acc. 0.1 gr. | Large ... » more

    Manufactured
    2005
    Price
  • used, Very Good general condition | PIPE BENDING MACHINE RB 118 - 01-99-039 | Delivery time: immediately | Number: 01-99-039 | Manufacturer: Pipe bending | Type: RB 118 | MACHINE DATA | Year of construction: approx. 1985 | L x W x H: approx. 2000 x 1400 x 1700 mm | Weight: approx. 1200 kg | Very Good general condition | ... » more

    Manufactured
    1985
    Price
  • new | Bending speed: 2.1 m / min | Bending capacity - square: 30x30 mm | Bending capacity - flat iron: 80x15 mm | Bending capacity - flat steel on edge: 50x10 mm | Pipe diameter: 1 "or 60x2 mm | Motor: 0.75 kW | Shaft diameter - Top: 35 mm | Shaft diameter - bottom: 30 mm | Dimensions L B H: 650 x ... » more

    Manufactured
    Price
  • new | Round Material: 40 mm | Pipe diameter: 70x2 mm | Square Material: 80x30x3 mm | Angle steel: 50 x 5 mm | I - steel - flat: 80 x 16 mm | I-Steel - on edge: 50 x 15 mm | Roll diameter: 157 mm | Shaft diameter: 50 mm | Bending speed: 2.95 m / min | Total power requirement: 1,1 kW | Machine weight ... » more

    Manufactured
    Price
  • new | Angle steel: 50x5 mm | Square Material: 50x40x3 mm | I - steel - flat: 120x15 mm | I-steel - portrait: 60x10 mm | Round material: Ø 35 mm | Pipe diameter: Ø 70x2 mm | Roll diameter: 155 mm | Bending speed: 4.3 m / min | Bore: 50 mm | Total power requirement: 1,5 kW | Weight: 400 kg | ... » more

    Manufactured
    Price
  • used, Good | Type: A100TNCB | Producer: CSM (Chiao Sheng Machinery) | Generated: | parameters: | Bendig capacity / round tube / structural steel: 101.6 x 5.5 mm | Bendig capacity / round tube / non-ferrous: 101.6 x 10 mmm | Bendig capacity / round tube / stainless: 101.6 x 3 mm | Bendig capacity / square ... » more

    Manufactured
    Price
  • new | Shaft diameter: 80 mm | Roll diameter: 260 mm | Shaft revolutions: 7 U / min | Infeed: 170 mm | Thrust hydraulic cylinder: 27 kN | Effective length of the shaft: 160 mm | Wheelbase: 450 mm | Total power requirement: 3,7 kW | Dimensions: 980x1430x1600 mm | Weight: 1380 kg » more

    Manufactured
    Price
  • new | Printing capacity: 50 bar | Piston stop: 200 mm | Bending capacity: 1.2 ", 3/4", 1 ", 5/4", 1 1/2 ", mm | Machine weight approx .: 140 kg » more

    Manufactured
    2020
    Price
  • used | - bending capacity - steel tube Ø 20 - 60 x 4 mm | - - Stainless steel tube Ø 20 - 50 x 3 mm | - Max. Resistance moment 6.2 cm | - Max. Bending angle 180 ° | - Max. Radius 125 mm | - Bending speed 8 sec | - 400 V / 3 kW drive | - Space requirements approx. L 2400 x H 1600 x D 1000 mm | - ... » more

    Manufactured
    1990
    Price
  • used, good | gebr. Tube bending machine | Make TRANSFLUID | Model DB 642 | Machine No .: 7030 | Year of construction 1992 | Bending capacity 6 - 42 mm | Pipe stroke length 3000 mm | Bending angle up to 190 ° | External dimensions: | Length with arm 4000 mm | Width 650 mm | Height 1150 mm | with remote | ... » more

    Manufactured
    1992
    Price
  • used | Max. Bending performance b. 40 kg strength | Round tube: 42 x 2.5 mm | square tubes: 40 x 1.2 mm | Rectangular tube / upright: 40 x 30 x 1.3 mm | Flat bend: 30 x 40 x 1.7 mm | smallest bending radius: 22 mm | largest bending radius with tube guide rollers: 255 mm | largest bending radius with ... » more

    Manufactured
    1992
    Price
  • new | Infeed: 95 mm | Shaft diameter: 30 mm | Shaft revolutions: 7 U / min | Roll diameter: 132 mm | Drive: 0.75 kW | Weight: 220 kg | Dimensions L-W-H: 530x900x660 mm » more

    Manufactured
    Price
  • used, good | Type: XOTN 40 | Producer: PIESOK | Created: 1978 | parameters: | The machine is in good technical condition » more

    Manufactured
    1978
    Price
  • new | Bending radius: R10-R260 | Rotation angle: 210 ° | Bending speed: 2 U / min | Bending capacity - Gas pipe: 1 1/4 "x 3.5 mm | Working voltage: single phase - 230 V | Drive motor: 1.1 kW | Machine weight approx .: 80 kg | Dimensions approx .: 410 x 1000 x 570 mm » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | Besturing / Coordinaten tafel / Aanslag Conventionel | Werking Hydraulisch / Servo / Mechanisch Hydraulic | Capaciteit ponzen Ø in dikte mm Ø 6 - 42 mm | Knippen lengte x dikte in mm L = 6.000 mm mm | www.mach4metal.com » more

    Manufactured
    1992
    Price
  • new | Pipe diameter: 33.7 x 3.4 GAS mm | Pipe diameter: 35.0 x 2.5 STEEL mm | Pipe diameter: 35.0 x 1.5 STAINLESS mm | Min. Bending radius: R10 - R 190 mm | Bending angle max .: 0-180 ° | Tool holder: hexagon 40 mm | Voltage: 230 V | Total power requirement: 0.9 kW | Machine weight approx .: 23.0 kg » more

    Manufactured
    Price
  • used, very well preserved | Electro- hydraulic pipe bending machine in top condition | Fabr .: Probably DAKO | Motor power: AEG 1.5 KW 1400 rpm 50 Hz 380 volts | Piston diameter: approx. 66 mm _ working pin diam. 35 mm | Cylinder diameter approx. 110 mm, cylinder piston - with new sealing rings | Control by since. ... » more

    Manufactured
    Price
  • new | Pressure: 100 kN | Hub: 0-200 mm | Table size: 450 x 1000 mm | Working speed :: 6-10 mm / sec. | Return speed: 20 mm / sec | Working height: 900 mm | Tool height max .: 200 mm | Total power requirement: 1,5 kW | Bending capacity max. - Circle: 42x3,2 mm | Bending capacity: 150x10 mm | Weight: ... » more

    Manufactured
    Price
  • new | Pipe diameter: 60.3 x 3.0 mm ST | Pipe diameter: 60.3 x 4.0 mm GAS | Pipe diameter: 60.3 x 2.5 mm VA | Solid material - Diameter: 35.0 mm | Bending angle max .: 210 degrees | Bending radius min .: 10 mm | Bending radius max .: 270 mm | Speed: 25 cycles at 90 ° | Total power requirement: 1,5 ... » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 3587 | MAKE Tracto Technik Germany | TYPE TUBOMAT 642 | YEAR 80 / 90 er | SPECIFICATIONS | Hydraulic / Mechanical Hydraulic | Capacity Ø x plate thickness 6 - 42 mm | Cutting lenght L = 3000 mm | Throat R = 90 mm | DIMENSIONS | Length 4000 mm | ... » more

    Manufactured
    1985
    Price
  • new | Shaft diameter: 40 mm | Shaft speed: 8.5 U / min | Infeed: 120 mm | Roll diameter: 152/162 mm | Motor power: 1.1 kW | Power consumption: 400/50 V / Hz | Hydraulic pump: 1.1 kW | Compressive force hydraulic cylinder: 80 kN | Dimension L B H: 900 x 600 x 1000 mm | Weight: 470 kg » more

    Manufactured
    Price
  • new | Bending capacity for steel pipe: 60x3 mm | Bending capacity at Steel: 60x2,5 mm | Bending performance at full Material: 35 mm | Bending capacity for hard copper and aluminum: 64x4 mm | Bending radius: R10-R300 | Bending speed: 2 U / min | Total power requirement: 1,5 kW | Machine weight ... » more

    Manufactured
    Price
  • used | Technical data: bending / mandrel bending performance tube diameter | at 45 kg / mm up to: Ø 42 x 2 mm solid material up to: 30 mm | left + right bend angle: 0 Highest middle bend radius: 180 ° Rm 171 mm Minimum bend radius: R 25 mm | Drive power: 400 V / 4.0 kW space requirement without ... » more

    Manufactured
    1988
    Price
  • new | Standard steel tube: 60 x 3 mm | Furniture construction tube: 60 x 4 mm | FE35 (for hydraulics): 64 x 4 mm | Stainless steel AISI304-316: 64 x 3 mm | Stainless steel AISI 308 (food): 60 x 4 mm | Soft brass: 60 x 4 mm | Hard copper and aluminum: 64 x 4 mm | Soft copper: 64 x 4 mm | Conduit ... » more

    Manufactured
    Price
  • new | Standard steel tube: 38 x 1.5 mm | Furniture construction tube: 38 x 1.5 mm | FE35 (for hydraulic lines): 35 x 3 mm | Stainless steel AISI304-316: 30 x 2 mm | Stainless steel AISI308 (food): 35 x 1.5 mm | Soft brass: 42 x 1.5 mm | Hard copper and aluminum: 42 x 1.5 mm | Copper soft: 50 x 2 mm ... » more

    Manufactured
    2016
    Price
  • used | for pipe diameter: 18/20/22/28 mm | Outside dimensions (without lever): 550 x 470 x 700 mm | Lever length: 1050 mm | Weight approx .: 100 kg | With | - Bending tools: | Diameter 18 mm R 60, R 100, R 140, R 180 | Diameter 20 mm R 75, R 115, R 155, R 195 | Diameter 22 mm R 90, R 130, R 170, R ... » more

    Manufactured
    Price
  • new | Bending capacity for steel tube: 48x3,5 mm | Bending capacity at Steel: 48x2,5 mm | Bending capacity at full Material: 32 mm | Bending performance with hard copper and aluminum: 64x2 mm | Bending speed: 2 U / min | Bending radius: R10-R300 | Total power requirement: 1,5 kW | Machine weight ... » more

    Manufactured
    Price

Search marketplace