Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Miscellaneous (574 Offers)

RSS
Order by:
  • used | General: | Year of construction 2006 | Bar length 100 - 3,200 mm | Rod diameter drum 1 - 7 mm | Number of guide tubes 36 | Weight approx. 600 kg | Dimensions 4,863 x 490 x 1,470 mm » more

    Manufactured
    2006
    Price
  • used | Foil width: 1400 mm | Max Speed: 250m/min | Hole diameter: 0.3-2.8 | Temperature: 400℃ | Heating power: 37 kW | Control: touch screen » more

    Manufactured
    2020
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 4143 | MAKE ROUNDO Sweden | TYPE F 13 C | YEAR 2015 | SPECIFICATIONS | Throat 1500 mm | Maximum sheet thickness Steel 13 mm | Maximum sheet thickness Alu 15 mm | Max. Bank ø in the gap 3000 mm | Power 7.5 kW | DIMENSIONS | Length 3000 mm | ... » more

    Manufactured
    2015
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 3718 | MAKE Pullmax - Kumla | TYPE F 13 C | YEAR 90 er | SPECIFICATIONS | Throat 1500 mm | Maximum sheet thickness Steel 13 mm | Maximum sheet thickness Alu 15 mm | Max. Bank ø in the gap 3000 mm | Power 7.5 Ps kW | DIMENSIONS | Length 4000 mm | ... » more

    Manufactured
    1990
    Price
  • used, used-good | Threading machine WMW GA33 including chaser jaws | Cutting range: M3 - M33/ M6x0.75 - M33x2.0/ R1/8" - R 1" | 6 x spindle speeds: 80 - 400 rpm | Carriage stroke: 200mm | Hollow spindle: 35mm | Drive power 1.5 KW | Chaser head Z-33, self-opening | 6 x sets of chaser jaw holders with chaser ... » more

    Manufactured
    Price
  • used | Grinding area: 250 x 400/200 x 500 mm | Dimensions approx .: 1040 x 920 x 1600 mm | Weight approx .: 500 kg | With | - motorized rotary table » more

    Manufactured
    Price
  • used, good | inventory Number : 5923 | Type: FK 3500 | Producer: ROPI | Produced: 2007 | parameters: | Paper Length: 60-450mm | Paper width: 100-450mm | Material Weight: 150-450g | Weight: 550kg | Furnishing: | CD glue | Replacement control panel | Worked: 800,000 boxes » more

    Manufactured
    2007
    Price
  • used, Sehr gut erhalten , Very good Condition | Make Pullmax F13C | Type F 13 C | Flanging & Dishing machine pullmax | Outside diameter max. (mm) Max = 13 mm | Inside diameter max. (mm) Workpiece = 3.000 | Max. pipe length (mm) Dishing R = 75 | Max. angle Dish height = 40 | Wall Thickness (mm) Min Blank = 800 | Cap in 60 Kg = 10 mm | Cap ... » more

    Manufactured
    2015
    Price
  • used, Sehr gut erhalten , Very good Condition | Make 1500 x 1000 (9x) | Type T Slotted cast iron | Year Length = 1.500 | Width = 1.000 | Capacity (metric tons) Height = 175 | Stroke (mm) 6 x T 18 | Distance Column/center (throat) mm T Jump = 190 | Table length (mm) 9 same Pieces | www.mach4metal.com » more

    Manufactured
    1990
    Price
  • used, Good Condition | Merk Froemag CNC | Type Rapida 70 - 425 | Jaar 1991 | FROMAG CNC | Keyway width 3 - 70 mm | Keyway length 425 mm | Table 460 x 690 x 30 ton load | * Toolingpackage 3 - 36 mm * CNC Controlled FROEMAG * New Euro 65.000 | www.mach4metal.com » more

    Manufactured
    1991
    Price
  • used, Sehr gut erhalten, Very good Condition | Make Centret Shot | Type WS 200 | Year 1991 | Drum L = 750 mm | Drum D = 600 mm | Work load = 75 Kg | Speed 2.7 Rpm | - Filtration system - Simple operation - Removes dirt, paint, oxidation, tiny burrs, residues - Silent and environment friendly | www.mach4metal.com » more

    Manufactured
    1991
    Price
  • used | Cooling capacity: 10700.00 W | Umgebungstempertaur max .: 37 ° C | allowable operating pressure: 29.5 bar | Refrigerant: R 407 c | Refrigerant amount: 5.5 kg | Voltage: 3 / PE - 400 V | Frequency: 50 Hz | Operating current max .: 11.3 A | Connected load: 6.7 kW | Weight: 300 kg | External ... » more

    Manufactured
    2004
    Price
  • used | Power at 3800 rpm: 180 kW / 244 PS | Displacement: 2967 cm3 | Top speed: 219 km / h | Fuel: diesel | Number of cylinders / engine type: 6-cylinder V-engine | Drive type: all-wheel drive | Transmission: 6-speed automatic transmission | Emission standard: Euro 6 T | Exterior color: Orca black, ... » more

    Manufactured
    2015
    Price
  • new | Capacity: 300 kg | max.workpiece size: 500 x 200 mm | Container volume: 158 l | Workpiece weight: 175 kg | max.workpiece weight: 30 kg / piece. | Rpm: 22 U / min | Filling quantity: 40-50% | Color: blue 5015 RAL | Opening: 625 x 270 mm | Total power requirement: 1,5 kW | Machine weight ... » more

    Manufactured
    Price
  • used, used | Bear weight about 300 kg | Ram stroke approx. 400 mm | Anvil weight approx. 4,000 kg - 800 mm underfloor | Working height 500 mm | Projection 500 mm | Drive motor overhauled | Central lubrication system | electrical values 380 V / 22 KW | Required space L - 2,400 x W - 1,300 x H - 2,600 mm | ... » more

    Manufactured
    1965
    Price
  • used | x-travel: NA mm | y-travel: NA mm | Workpiece height: mm | Stroke max .: 450 mm | Table length: 450 mm | Table width: 350 mm | Total power requirement: 1.7 kW | Machine's weight about: t | Dimensions of the machine ca: m » more

    Manufactured
    1974
    Price
  • used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Controll Hydr. flanging | Throat 40 / 30 mm | Maximum sheet thickness Steel 1 mm | Maximum sheet thickness Alu 3 mm | Stroke's No./ Min. 20 - 60 | Power 3.1 kW | www.mach4metal.com » more

    Manufactured
    1996
    Price
  • used, Sehr gut erhalten , Very good Condition | Make WMW UPW25.1 | Type UPW 25.1 | Year 80 er | Thread roller | Min. work = 10 mm | Max. work = 100 mm | Pitch / lead = 8 mm | Bore = 80 mm Thread L = 180 Force = .5 to 25 T Optional large tooling ! | www.mach4metal.com » more

    Manufactured
    1980
    Price
  • used | Wheel diameter - max: 400 mm. | Wheel width: NA mm | Module - max: 1. | Module - min: 10. | Total power requirement: 12 kW | Machine weight approx: 4,2 t | Dimensions of the machine ca: m » more

    Manufactured
    1974
    Price
  • used, Sehr gut erhalten , Top Condition | MAAG - SH-75 | Gear Shaping Machine Ø 750 x Modul 10 | MACH - ID 6277 | Make: MAAG | Type: SH-75 | Table Ø 500 mm | Max. workpiece 750 Ø | Modul 10 mm | Working speed 23,5 - 150 mm | Length 2.100 mm | Width 1.700 mm | Height 2.100 mm | Weight 4.800 kg | ... » more

    Manufactured
    Price
  • used | Temperature max. 420 degrees | Opening Size: 200 mm | Depth of the chamber: 350 mm | Total power requirement: 2,5 kW | Machine's weight about: t | Dimensions of the machine ca: m » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Very good Condition | Make Lorenz LS 1000 | Type LS 1000 | Year 70 / 2010 | Zahnradstossmaschine gear shaping machine | Table = 1.005 | Swing = 1.000 | Modul = 0.5 - 12 | Stroke = 230 Table / spil = 480 Load = 2700 Kg Extended column 150 mm !! Retrofitted electr + geometric !! | www.mach4metal.com » more

    Manufactured
    2010
    Price
  • used | Slot width: 50 mm | Cutting length: 320 mm | Working speed: m / min | Capacity: 3 tons | Working length: 320 mm | Working width: 30 mm | Capacity: 3 | Total power requirement: kW | Machine's weight about: t | Dimensions of the machine ca: m » more

    Manufactured
    1964
    Price
  • used, Sehr gut erhalten , Top Condition | MERK Fedek | TYPE DH 65 | YEAR 2004 | AFMETINGEN | Lengte 1600 mm | Breedte 800 mm | Hoogte 1300 mm | www.mach4metal.com » more

    Manufactured
    2004
    Price
  • used, Sehr gut erhalten, Very good Condition | Make Omera R3 / 7 | Type R3 / 7 | Year 2003 | Siemens Semi Automat | Outside diameter max. (mm) Max. diam. 700 | Inside diameter max. (mm) Stroke cylinder 400 | Max. pipe length (mm) Max. sheet 5 mm | Max. angle Arm height 825 | Wall Thickness (mm) Die table / ram 425 | Sick safety guids | ... » more

    Manufactured
    2003
    Price
  • used, Sehr gut erhalten , Top Condition | OMERA - R 1600 | Forming Trimming machine 1600 mm | MACH - ID 6354 | Make: OMERA | Type: R 1600 | YOP: 2008 | Max. blank / workpiece over bed 1800 Ø | Dimensions | Length 2.800 mm | Width 2.000 mm | Height 2.600 mm | Weight 4.100 kg | www.mach4metal.com » more

    Manufactured
    2008
    Price
  • used, Very Good general condition | Bar chamfering and turning machine Conemaster CM 3 22-02-014 | Delivery time: immediately | Number: 22-02-014 | MACHINE DATA | Year of construction: approx. 2000 | L x W x H: approx. 1300 x 900 x 1300 mm | Weight: approx. 300 kg | Very Good general condition | TECHNICAL SPECIFICATIONS | ... » more

    Manufactured
    2000
    Price
  • used, new | Nominal power 45 KW | Connection 400 V / 50 Hz | Rated speed 1,770 rpm | with flange and foot | surface-cooled - aluminum alloy | Shaft diameter 60 mm | Flange diameter 350 mm | Hole circle diameter 400 mm | Required space L - 800 x D - 500 x H - 450 mm | Weight approx. 235 kg | - New - » more

    Manufactured
    Price
    1.200 EUR
  • used | Wheel diameter - max: 150 mm. | Wheel width: 42 mm | Module - max: 3. | Module - min: 0.5. | Total power requirement: 10 kW | Machine weight approx: 6 t » more

    Manufactured
    1980
    Price
  • used | Drive power: 0.18 kW | Volt: 230/400 V | Amps: 0.95 / 0.55 amps | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    2008
    Price

Search marketplace