Equipment (253 Offers)

used | brand-new horizontal-vertical rotary table, of proven design, for direct division | HV 12: | Table Ø 300 mm, height to the middle in a vertical position 195 mm, internal taper MT 4, passage in the inner cone 22 mm, Weight 77 kg » more

used | brand-new semi-universal dividing head, horizontal u. vertical operation, with direct and indirect part means | Center height 125 mm, spindle bore 20 mm, inner cone MK 3, recording of catch or feed or chuck flange - thread, swiveling + 90 / - 10 °, direct pitch 10 °, index for division of 15 ... » more

used | Jaw width: 113 mm | Clamping height: 31.6 mm | Wingspan: 170 mm | Height: 130 mm | Clamping force: 30 kN | Weight: 24 kg » more

used | lightly used and very well-preserved horizontal-vertical rotary table, with grade and indirect dividing means dividing plates | various partial disks | Table size 500 mm Ø, height 234 mm, height of at horizon. Position 380 mm, this total height 630 mm, T-slot size 16 mm, ratio 1: 120, weight ... » more

used | used chuck with mounting flange | inward stepped jaws » more

used | Centering, Tailstock, storage box | Table Ø 400 mm, table with 8 T-slots 12 mm, height: 175 mm, space 600 x 450 x 175 mm, weight about 100 kg » more

used | Weight: 80 kg | virtually unused spiral milling device, suitable for milling machine FP 2 | Spindle taper of the dividing head ISA 40, height of 65 mm, distance 400 mm, for helical pitch range 1.5 - 8000 mm, dividing head for indirect sharing with 3 tubular plates, pivoting for cone spirals 0 ... » more

used | Table area: 240 x 700 mm | 5 T-slots 12 mm, spacing of the T-slots 45 mm » more

used | Table surface: 520 x 1000 mm | Weight: 376 kg » more

new | Table rotation on the circumference of hand | Three-jaw chuck Ø 315 mm with outwardly stepped jaws | Table size 400 mm Ø, height 135 mm, spaced by graduated at the periphery as well as with the grating disk in division 15 °, space 500 x 500 x 135 mm high » more

used | Table area: 250 x 600 mm | 5 T-slots 12 mm, spacing of the T-slots 45 mm » more

used | suitable for FP 3 L; FP 3 and FP 3 LG LV | Table surface: 520 x 1000 mm | Weight: 376 kg » more

used | Used automatic indexers, hydraulic tensioning and relaxing the face plate, drive via three-phase brake motor, division according to the number of teeth of the face gear, unequal division possible change of direction | Faceplate Ø 650 mm, number of teeth of the splitter 360, the smallest poss. ... » more

used | Used rotary table for direct division | Table Ø 320 mm, height 103 mm, center hole MK 4, for direct parts over grid scale disk, 15 °, also on scale space 400 x 500 mm » more

used | Table diameter: 630 mm | Overall height: 180 mm | With | - Water gutter | - Part washers | - For indirect and degree graduation » more

used | Table diameter: 800 mm | Table load: 6 t | Table height: mm | Machine weight approx .: 950 kg » more

used | Clamping surface: 1000 x 470 mm | Width of T - slots: 16 mm | Groove spacing: 90 mm | Weight: about 400 kg | Other: | 2 side Coolant drain channels | All technical information believed to be accurate and actual documents. | Each party has the opportunity to visit the table before making a ... » more

used, good ready for use condition | collet chuck | Tool holder: SK 50 with ring groove, DIN 2080, | Tightening thread: M 24. | Incl. 1 collet, diameter: 32 mm. | Clamping nut diameter: 76 mm. | Total length: approx. 205 mm. | Weight: about 7kg. | Can you offer even more SK 50 tool holders | offer, if required, please ask. » more

used, very well | Around 80 tool holders with tools as well as holders and tools manufactured by Wohlhaupter according to photos | The tool holders were used on Mori Seiki MV Junior and SV 400 machining centers and are in very good condition. » more

new | Speed: 1800 r / min | Drive motor: 14.7 kW | Recording: ISO 50 | Torque: 780 Nm » more

used | - Electric - Hydraulic machine vice with separate hydraulic unit | and E. Footswitch for opening and closing the jaws. | - Jaw width 200 mm | - Baking height 75 mm | - Clamping range approx. 0 - 350 mm | - Guideway height approx. 100 mm | - total height 185 mm | - separate hydraulic power ... » more

used | Round table diameter: 270 mm | Division: 12 | Air requirement: 6 atm | External dimensions approx .: 500 x 270 x 105 mm » more

new | Wheel speed: 3000 U / min | Recording: ISO 50 | Drive motor: 22 kW | Discharge of the milling spindle: 358 mm | Toolholder: DIN 69871 » more

new, unused | Table size 700 x 400 mm | Clamping area 330 x 580 mm | 3 T-slots 12 mm | Travel approx. 400 mm | Scaling 0.05mm | 1 spindle revolution = 4 mm | swiveling 360 ° with lock | Overall height 195 mm | max. table load approx. 100 kg | max. working pressure approx. 500 kg | Required space L - 850 x ... » more

new | Table length: 600 mm | Table width: 240 mm | x-travel: 370 mm | y-way: 130 mm | Table height: 165 mm | 60 kg | Dimensions L x W x H: 0.8 x 0.45 x 0.2 mm » more

used | Jaw width: 65 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

used | Cone holder: SK 40 mm » more

used | Length: 600 mm | Width: 2700 mm | Depth: 1115mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

used | Jaw width: 64 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

new | Flow rate: 30 l / min | Power: 70 watts | Funding height: 4 | Operating voltage: 230 V | Diving depth: 85 mm » more