Equipment (119 Offers)

used | Working range: 35 - 90 mm | Seat angle: 45 and 30 ° | Special set for MAN | with accessories in wooden box » more

used | lightly used and very well preserved Boring | 4 steel shots for holes, 2 ditto for facing, operating tool | with taper: MK 5 | Radial adjustment of approximately 50 mm | automat. Feed approx: 0.05 mm / rev | Eilrückzug approx: 0.8 mm / rev | gr spindle speed about 700 rpm | Weight including ... » more

used | with mounting flange according to DIN 55027, Cone Size 8 | hard ground and hard jaws, chuck key » more

used | with Quadruple tool holder of L + Z lathe VDF BOEHRINGER, V 6, Year 1963 | techn. Documentation (spare parts list) | Adjustment 180 mm, height to lower edge of tool holder 170 mm, tool holder edge length 205 mm, -spannhöhe (steel section) 80 mm, weight about 80 kg » more

used | as well as unused and therefore absolutely mint condition Faceplate, American type, with screw-reversible jaws | Diameter 300 mm | Flange width 80 mm | Spindle taper - Short taper according to DIN 55027 - Gr. 5 » more

used | Peak height approx: 235 mm | Dowels Ø: 90 mm | Quill stroke: 200 mm | Taper: MK 5 | 120 kg » more

used | Camlock Recording | OD 205 mm, height 59 mm, camlock mount DIN 55029 Gr. 3 » more

used | with reversible top jaws, american type, light duty | Accessories | Direct mount according to DIN 55022, short taper size 8 | Were wide information | Diameter 550 mm, flange width 115 mm » more

used | with short taper mounting flange | hard ground and soft top jaws | OD: 318 mm | Bore: 86 mm | Width: 111 mm » more

used, ready for use | for material Ø: 6 - 80 mm | for bar lengths: 100 - 915 mm | Shooting table size: 945 x 800 mm | Working height: 1400 mm | height adjustable: +/- 200 mm | elec. Connection: 220V | Space required: 3420 x 1150 x approx. 1500 mm | Weight: about 300 kg » more

used | American design, with reversible jaws | A cylindrical center | Diameter 600 mm, bore 135 mm, flange width 125 mm, weight 132 kg » more

used | with folding stock, to operate from one side | for lathes with peak heights from 500 mm, max. Spann-Ø 350 mm, quill Ø 100 mm, with roller inserts, roller dimensions 40 x 90 mm Ø » more

used | External Ø 250 mm » more

used | absolutely like-new faceplate, American type, with direct recording | hard reversible jaws | OD 500 mm, bore 95 mm, flange width 103 mm, Mount short taper, Camlock DIN 55029 Gr. 6 » more

used | little used and therefore almost as good as new three-jaw chuck wedge, with mounting according to DIN 55026 (3 screws with centering, without chuck) | hard ground and soft top jaws, service keys | Chuck diameter 400 mm | Bore 130 mm » more

demonstration machine | equipped with short taper mounting flange | hard ground and soft top jaws » more

used | virtually unused Vierbackenfutter cast iron, DIN 6350 | internally and externally stepped hard jaws, chuck key | OD: 200 mm | Bore: 55 mm | Centering of the chuck flange with fit H 7: 160 mm | Height: 75 mm | Weight: 17.5 kg » more

used | with central and also individually adjustable jaws | Chuck, short taper size 4 | OD 125 mm, Bore Dia 32 mm, centering, Form A to DIN 6351 95 mm, height 71 mm chuck, Weight 6 kg » more

used | with individually adjustable reversible jaws | compl. m. Elementary and reversible jaws, feed and adjusting key | OD 205 mm, bore 50 mm, body height 95 mm » more

used | hardly used and therefore absolutely like new four-jaw chuck, with spiral ring to DIN 6351, with reversible jaws, centric clamping and individually adjustable, with Kurzkegelflansch | 2 set of soft jaws » more

used | hardly used and therefore well-preserved three-jaw chuck, cast iron construction, with camlock recording size 6 | 1 set of inward stepped jaws » more

used | Lathe chuck with morse taper for receiving the tailstock or hollow spindle | Chuck dia 240 mm | Morse taper size: 6 » more

used | little used and therefore well-preserved three-jaw Eccentric, with short-taper mount | hard, outward stepped jaws (the inwardly stepped jaws are not available) » more

demonstration machine | absolutely like new Vierbackenfutter incl. chuck flange, Camlock D1 6 " | Indoor &. Outer jaws and chuck key | Were wide information » more

used | with jaw safety | hard ground and hard jaws | Lining OD 255 mm, clamping range external / internal thrilling 8 - 250/95 - 250 mm, bore 60 mm, weight 34 kg » more

used | Faceplate diameter: 450 mm | Bore: 120 mm | Faceplates - height: 120/165 mm | Short taper: Din 55022 7 Gr. 11 » more

used | Faceplate diameter: 400 mm | Bore: 100 mm | Short cone: Gr. 6th » more

used, Very Good general condition | SHORT LOADER IEMCA VIP 70 - | 27-03-016 | Delivery time: immediately | Number: 27-03-016 | Manufacturer: IEMCA | Type: VIP 70 | MACHINE DATA | Year of construction: approx. 1999 | L x W x H: approx. 2000 x 1000 x 1400 mm | Weight: about 450 kg | Very Good general condition | TECHNICAL ... » more

used | Workpiece diameter - max .: 40 mm | Thread length: 300 mm | Pressure: 2 t » more

used | Diameter: 800 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more