Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Injection molding (30 Offers)

RSS
Order by:
  • used, good | inventory Number : 6298 | Type: 1000-430 | Producer: DEMAG | Produced: 1995 | parameters: | Clamping force: 100 t | Screw diameter: 40 mm | Injection capacity: 231 cc | Injection mass: 205 g | Min. height of the clamping plate: 580 mm | Min. width of the clamping plate: 590 mm | Distance ... » more

    Manufactured
    1995
    Price
  • used, good | inventory Number : 6279 | Type: ES 500/90 HL-ST | Producer: ANGEL | Produced: 1998 | parameters: | Clamping force: 900 kN | Furnishing: | robotic system » more

    Manufactured
    1998
    Price
  • used, good | inventory Number : 6285 | Type: ES 330-110 Hc-V | Producer: ANGEL | Produced: 1999 | parameters: | Clamping force: 110 t | Shot weight: 5900 kg | Furnishing: | robotic system » more

    Manufactured
    1999
    Price
  • used, good | inventory Number : 6282 | Type: TM 1300 RA2 | Producer: Battenfeld | Produced: 2001 | parameters: | Clamping force: 130 t | Shot weight: 6000 kg | Furnishing: | Wittmann robot system » more

    Manufactured
    Price
  • used, good | inventory Number : 6281 | Type: 500-200 | Producer: DEMAG | Produced: 1998 | parameters: | Clamping force: 500 kN | Furnishing: | robotic system » more

    Manufactured
    1998
    Price
  • used, good | inventory Number : 6280 | Type: ES 650/125 HL | Producer: ANGEL | Produced: 1996 | parameters: | Clamping force: 1250 kN | Shot weight: 9000 kg | Furnishing: | robotic system » more

    Manufactured
    1996
    Price
  • used, good | inventory Number : 5850 | Type: IS 450 GS | Producer: TOSHIBA | Produced: 2001 | parameters: | Operating hours: 42,978 h | Total number of injections: 2,164,822 | Clamping force: 4410 kN | Screw diameter: 70 mm | Injection capacity: 1480 cm³ | Injection mass: 1360 g | Min. height of the ... » more

    Manufactured
    2001
    Price
  • used, Good | inventory Number : 5345 | Type: Insert 330H 90 | Producer: Angel | Produced: 2006 | parameters: | On hours: 46238 h | Clamping force: 900 kN | Screw diameter: 25 mm | Injection capacity: 79cc | Maximum injection pressure: 2195 bar | Pump power: 15 kW | Mold Opening: 304mm | Furnishing: | ... » more

    Manufactured
    2006
    Price
  • used, good | inventory Number : 6278 | Type: ES 750/175 HL | Producer: ANGEL | Produced: 2001 | parameters: | Clamping force: 155 t | Furnishing: | robotic system » more

    Manufactured
    2001
    Price
  • used | Screw diameter: 35 mm | Shot weight in polystyrene: 140 g / PS | Clamping force: 800 kN | Stroke: 425 mm | Mold height: 200 mm | Plate size: 590x590 mm | Control: Unilog 4000 | Total power requirement: kW | Machine weight approx .: 3900 kg | Dimensions approx .: 4,15x1,5x1,95 m » more

    Manufactured
    1997
    Price
  • used, good | Control system: Dialogic | Closing hours: 58337 | Operating hours: 52223 | Closing force: 2000 kN | Material volume: 427 cm3 | Size of the mold plates: 520 mm x 520 mm | Tool opening travel: 900 mm | Screw diameter: 50 mm | Injection pressure: 2050 bar | Max. Cubic capacity: 353 cm3 | Machine ... » more

    Manufactured
    1995
    Price
  • used | Screw diameter: unbkt. mm | Shot weight in polystyrene: unbkt. g / PS | Closing force: 150 kN | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    2007
    Price
  • used | Screw diameter: 50 mm | Plate distance - max.: 1050 mm | Closing force: 2000 kN | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m | Spray weight in polystyrene: g / hp » more

    Manufactured
    2006
    Price
  • used, good | inventory Number : 5932 | Type: Ergotech system 3300 | Producer: DEMAG | Produced: 1997 | parameters: | Operating hours: 92320 | Clamping force: 330 t | Max Speed: 60mm | Machine length: 7000mm | Machine width: 1900 mm | Machine height: 2200 mm | Shot weight: 14000 kg » more

    Manufactured
    1997
    Price
  • used, good | Inv. Num.: 5679 | Type: BA 250/50 Plus | Producer: Battenfeld | Generated: 1995 | Parameters: | Control system: Unilog 1020 | Clamping force: 250 kN | Injection capacity: 49 cm³ | Injection weight: 44.6 g | Min. Height of the clamping plate: 470 mm | Min. Width of the clamping plate: 280 mm | ... » more

    Manufactured
    1995
    Price
  • used | Closing force: 5980 kN | Clamping plate:. mm | Distance between columns:. mm | Total power requirement: kW | Machine weight approx .: 22.5 t | Dimensions of the machine ca: m » more

    Manufactured
    1990
    Price
  • used | Closing force: 11000 kN | Clamping plate:. mm | Distance between columns:. mm | Total power requirement: kW | Machine weight approx .: 45 t | Dimensions of the machine ca: m » more

    Manufactured
    1988
    Price
  • used, good | inventory Number : 6168 | Type: GUIDE LWF 1600-SV | Producer: Leadway | Produced: 2016 | parameters: | Clamping force: 160 t | Screw diameter: 40 mm | Distance between uprights: 520x470 mm | Ejector force: 59 kN | Screw stroke length: 140 mm | Mold height: 520 mm | Max. speed: 300 rpm | ... » more

    Manufactured
    2016
    Price
  • used | Closing force: 2000 kN | Opening path: max. 650 mm | Engine: 30 kW | Column spacing: 520x520 mm | Weight: 7000 kg | Dimensions: 6000x2600x2400mm » more

    Manufactured
    2002
    Price
  • used, good » more

    Manufactured
    2017
    Price
  • used, good | inventory Number : 6147 | Type: 300 | Producer: HUSKY | Produced: 2004 | parameters: | Operating hours: 79,250 | On hours: 42,205 h | Clamping force: 300 t | Screw diameter: 70 mm | Injection capacity: 1347 cm³ | Distance between uprights (vertical): 780x780 mm | Mold height: 775 mm | ... » more

    Manufactured
    2004
    Price
  • used, good | Inv. Num.: 5680 | Type: BA 230 | Producer: Battenfeld | Generated: 1988 | Parameters: | Control system: Unilog 2000 | Clamping force: 230 kN | Injection capacity: 43.2 cm³ | Injection weight: 39.3 g | Min. Height of the clamping plate: 440 mm | Min. Width of the clamping plate: 275 mm | ... » more

    Manufactured
    1988
    Price
  • used, good | inventory Number : 5875 | Type: KM 300-1400 C1 | Producer: Krauss Maffei | Produced: 2001 | parameters: | Switch-on hours: 70,000 h | Clamping force: 300 t | Screw diameter: 60 mm | Injection capacity: 679 cc | Injection mass: 618 g | Minimum platen height: 995 mm | Min. width of the clamping ... » more

    Manufactured
    2001
    Price
  • used, good | specification | inventory Number : 5851 | Type: IS 280 GS | Producer: TOSHIBA | Produced: 1996 | parameters: | Operating hours: 24,593 h | Total number of injections: 7,410,962 | Clamping force: 2774 kN | Screw diameter: 60 mm | Injection capacity: 930 cc | Injection mass: 855 g | Min. height ... » more

    Manufactured
    1996
    Price
  • used | Hopper Top feed: 320 x 200 mm | Number stator / rotor diameter: 3/2 | Rotor diameter: 180 mm | Standard sieve: 5.0 mm | Output approx .: 40 60 kg / h | Power 400V: 3,0 kW | Rotor speed approx .: 320 kg » more

    Manufactured
    2005
    Price
  • used, good | inventory Number : 6167 | Type: GUIDANCE LWF 1300 -SV | Producer: Leadway | Produced: 2016 | parameters: | Clamping force: 130 t | Screw diameter: 35 mm | Distance between uprights: 470x420 mm | Ejector force: 45 kN | Worm stroke length: 120 mm | Mold height: 450 mm | Max. speed: 320 rpm | ... » more

    Manufactured
    2016
    Price
  • used, good | inventory Number : 5849 | Type: IS 220GN | Producer: TOSHIBA | Produced: 2002 | parameters: | Operating hours: 756 | Total number of injections: 5,767,094 | Clamping force: 2150 kN | Screw diameter: 50 mm | Injection capacity: 490 cc | Injection mass: 450 g | Min. height of the clamping ... » more

    Manufactured
    2002
    Price
  • used | with hydraulic ORSTA » more

    Manufactured
    Price
  • used, good | inventory Number : 5947 | Type: IS 75 PNll | Producer: TOSHIBA | Produced: 1984 | parameters: | Clamping force: 75 t » more

    Manufactured
    1984
    Price
  • used | Closing force: 5800 kN | Clamping plate:. mm | Distance between columns:. mm | Total power requirement: kW | Machine's weight about: 22 t | Dimensions of the machine ca: m » more

    Manufactured
    1990
    Price

Search marketplace