Frank Pelka Maschinen GmbH

used | Double profiling system | Manufacturer: Reinhard RAS | Type : 10.28 | Year of manufacture : 1993 | Number of stations 2 x 14 | Throughput speeds 10 - 30 m/min | Output variable motor stepless 0.55 KW | Belt width 350 - 1300 mm | Profile height 55 mm | Weight 5000kg | Weight complete 12000 kg ... » more

used | Drilling angle / clamping angle / clamping plate | Dimensions | 1000x800x500 | Weight about 500 kg » more

new | Hydraulic 4-roller bending rolls | The 4R OHS type has 4 rollers. The upper roll and the lower roll are arranged centrally. The top roller and the two side rollers are driven. The central lower roller is adjusted hydraulically - the sheet metal is clamped with it, the processing time is ... » more

used | Conveyor belt Peter Schulz | Machine No. 11962 | Year of construction: 1979 | motor driven 16 A | Dimensions LxWxH: 1100x300x740 mm » more

new | Hydraulic C – column press (punch press) | Capacity : At 230 bar – 100 tons | Control / key switch : | 1. Manual setup mode without light sensor | 2. Automatic (at full speed) with light sensor | Main cylinder : Ø 230mm. | Auxiliary cylinder : 2 pcs Ø 50 x 30mm. | Auxiliary guide : 2 pcs. Ø ... » more

used | The heavy-duty trestles are equipped with a 100 mm box profile. The thickness of the material is 10 mm. | Length 800mm | Height 520mm | Inner cross-welding left and right with 70 mm x 70 mm | Between the transverse welds longitudinally welded with box section 50 x 30 | All mitres are double ... » more

used | spinning machine | Manufacturer: Leifeld | Type : CNC 750 | Refurbished: 2016/2017 | new guides | new hydraulic cylinders | Conversion by Metallformer | Control: Siemens | Blank followers are hydraulic | Hydraulic workpiece ejector | Hydraulic parting device, via the control | additionally: ... » more

used | vacuum lifting table | 2000x4000mm | Pump PO 1140 No. 423660/GLZZ | vacuum 20 mbar » more

used | Electrode welder | Manufacturer: Kemppi (Finland) | Output: 5 - 300 amps | semi-automatic electrode welding machine | Welding tongs (length approx. 4,000 mm) | Ground cable | Connection cable 5 pin 32 Amp » more

used | Welding rectifier Mansfeld | Type G450 | Year of construction 1989 | Connection | 380V , 23kVA, 35A, max. 48A | cos 0.61 | Type of cooling F | No-load voltage max. 74 V | Weight 230kg » more

used | Turntable with graduation and perforated disks | Diameter 400mm | 6 T-slots 15/25 mm | Bore 30mm » more

used | Manual magnetic chuck | 500x300mm | Pole division 20/10 mm » more

used | Pneumatic glazing table Polzer | Type: PN-PZ280 | Factory number: 018/0640 | Year of construction: 1990 | Dimensions: 2700x1400x860 mm (LxWxH) | Mobile and pivotable » more

used | Scale | 5-300kg | Weighing surface 600x800 mm » more

used | High-speed spindle with frequency converter for milling with collet holder | stepless speeds from 6 - 12000 rpm stepless | Drive power: 7.5 kW | attach to horizontal spindle/Y-axis with flange plate » more

used | Switch and control cabinet | Lenze control | Profibus DP | DC 24V | max. 480V | Control Siemens Simatic S7-300 | DC 24V | max. 230V | PS307 A5 | DI16/DO16xDC24V » more

used | Fezer rotating and swiveling vacuum suction table | Manufacturer: Fezer | Type : ATS | Year of manufacture : 1989 | Size of the suction plate 300 x 100 mm | Number of suction slats 2 pcs. | height-adjustable pedestal | Workpiece support 730 to 1000 mm | without vacuum generator (stationary ... » more

used | T-slot table with cross slots | Dimensions: 650x500x60 mm (LxWxH) | Drain hole 135mm | T-slots 18/35 » more

used | Roller block 300 mm | Roller diameter 70mm | on stand with 4 feet » more

used | Swivel table with 3 pcs. T-slots | Table size 520 x 250 mm with discharge channel | Clamping area 170 x 480 mm | pivotable » more