Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Deburring machines (32 Offers)

RSS
Order by:
  • used | Plate length: 750 (table size) mm | Top width: 400 (table size) mm | Plate height: 40 mm | Total power requirement: 4,5 kW | Sheet thickness: 2 - 40 mm | Chamfer width: 1 - 15 mm | Chamfer angle: 30 - 60° | Speed: 0 - 6000 U / min | Weight of the machine ca .: 450 kg | Space requirement ... » more

    Manufactured
    2007
    Price
  • used | Table size: 320 x 120 mm | infinitely adjustable facet width: 0 - 10 mm | Speed: 2800 rpm. | Motor power: 0.37 kW | External dimensions approx .: 300 x 350 x 300 mm | Power supply: 380 V / 50 Hz | Weight approx .: 18 kg » more

    Manufactured
    Price
  • used | Workpiece cross-sections: 20 x 20 to 130 x 130 mm | 2 brush speeds: 1500/3000 rpm. | Deburring time: 1 - 5 sec. | Drive power: 3.5 / 4.6 kW | Dimensions approx .: 1200 x 1200 x 1800 mm | Weight approx .: 150 kg | suitable for | - Steel, VA, aluminum, copper and brass | - Deburring by rotating ... » more

    Manufactured
    2008
    Price
  • used, very well | Effective working width 1,500 mm | Workpiece thickness 1 - 100 mm | Feed rate, frequency controlled 0.5 - 4 m / min | Max. Part weight 100 kg / m² | Modules: washing and drying equipment, magnetic track, vacuum suction system, discharge roller table, brush module, module for wet grinding ... » more

    Manufactured
    2016
    Price
  • used | Plate thickness: 5.0 mm | Speed ​​range: 1500/3000 U / min | Brushes - Diameter: 250 mm | Brush width: 80 mm | Operating voltage: 380 Volt | Total power requirement: 2,4 / 3,0 kW | Weight of the machine ca .: 175 kg | Space requirement approx.: 700 x 460 x 1200 mm » more

    Manufactured
    1987
    Price
  • used | Workpiece cross-sections: 10 x 10 to 150 x 150 mm | 2 brush speeds: 1500/3000 rpm. | Deburring time: 1 - 5 sec. | Drive power: 3.5 / 4.6 kW | suitable for | - Steel, VA, aluminum, copper and brass | - Deburring by rotating the brush at high speed | - Service rotation = circling the brush ... » more

    Manufactured
    1996
    Price
  • used | Internal dimensions L x W x D: 1100 x 380 x 430 mm | Filling weight approx .: 150 l | Speed ​​range: 1000 - 1900 rpm. | Drive power: 11 kW | External dimensions L x W x H: 2600 x 1250 x 1750 mm | Weight approx .: 2255 kg | With | - Switch cabinet » more

    Manufactured
    1961
    Price
  • used | Working width: 1380 mm | Workpiece height: 70 mm | : | Total power requirement: 45 kW | Machine's weight about: 5500 kg | Dimensions of the machine ca: m » more

    Manufactured
    2007
    Price
  • used | Sheet thickness: 0.5 - 6 mm | Sheet width: max. 610 mm | Grinding roller dimensions: 630 x 200 mm | 2 grinding wheel speeds: 1270 + 2030 rpm. | 2 cutting speeds: 18 + 13 m / sec. | Throughput speed: 2 m / min. | Working table height: 780 mm | Drive power: 3.7 kW | Oscillation drive: 0.4 kW | ... » more

    Manufactured
    1989
    Price
  • new | Diameter: 150 mm | Workpiece length: 1300 mm | Workpiece width: 800 mm | Grinding wheel diameter max .: 150 mm | Speed range: 0 - 2830 rpm | Working height: 945 mm | Head swivels +/-: 180° | Motor power: 1.5 kW | Machine weight approx.: 230 kg. | Space requirement approx.: 1435 x 1100 x 1510 ... » more

    Manufactured
    Price
  • used, good | Max. Sheet thickness: 5 mm | Speeds: 1500/3000 rpm | Brush diameter: 250 mm | Total power requirement: 2.4 / 3.0 KW / 400 V | Machine weight: approx. 300 kg | Equipment / accessories: | Maschinenfixatoren | The machine is suitable for deburring sheet steel made of steel, stainless steel and ... » more

    Manufactured
    1996
    Price
  • new | Diameter: 150 mm | Workpiece length: 1300 mm | Workpiece width: 800 mm | Grinding wheel diameter max .: 150 mm | Speed range: 0 - 2830 rpm | Working height: 945 mm | Head swivels +/-: 180° | Motor power: 1.5 kW | Machine weight approx.: 230 kg. | Space requirement approx.: 1435 x 1100 x 1510 ... » more

    Manufactured
    Price
  • used | for pipes, profiles, solid material and sheets | Technical specifications: | Workpiece diameter: unlimited | Brush diameter: 250 mm | Brush width: 60 mm | 2 speeds through pole-changing motor: 1500/3000 rpm. | electr. Connection: 380 V, 2/3 kW | Space requirement: 500 x 650 x 1200 mm | Weight ... » more

    Manufactured
    1990
    Price
  • used, good | Drum size: 370 mm dia. x 420 mm deep | Total power requirement: 0.75 KW / 380 V | Machine weight: approx. 250 kg | Equipment / Accessories | stepless speed regulation | elec. Height adjustment of the drum | skew | Gumming = very good | All technical data were created to the best of our ... » more

    Manufactured
    1970
    Price
  • used | x-axis: 210 mm | y-axis: 300 mm | Voltage: 230 V | Electricity: 16 A | Weight: 260 kg | Space required: 1,75x1,0x0,9 m » more

    Manufactured
    2005
    Price
  • used | milling unit: | - Hydro-, retracts with additional pneumatic slide | (110 mm Schnellzustellungshub, 50 mm stroke) | Druckluftfrässpindel: | - 950 mm U / min | - CW or CCW rotation | Brush unit: | - Hydro-retracts | - Stroke 0 - 100 mm | - 1.1 kW | - 2800 r / min | - Collet diameter 12 mm | ... » more

    Manufactured
    1998
    Price
  • used | Max. Sheet thickness: 8.0 mm | Number of brushes: 2 | Brush diameter: 300 mm | Motor power: 2 x 2 kVA | Dimensions L x W x H: 1000 x 700 x 600 mm | Weight approx .: 150 kg » more

    Manufactured
    Price
  • used, in good condition | Container capacity: 290 l | Vessel inside diameter: 1030 mm | Dimensions L x W x H: 2000 x 1300 x 1500 mm | Price on request. | Best regards | Mike Waldeck | WAHO GmbH | Mobile: +49 (0) 151/15679203 » more

    Manufactured
    1989
    Price
  • used | Brushes - Diameter: 250 mm | Brush width: 80 mm | Speed ​​range: 1500/3000 U / min | Operating voltage: 380 Volt | Total power requirement: 2.0 / 3.0 kW | Weight of the machine ca .: 175 kg | Space required: 800 x 400 x 1,300 mm » more

    Manufactured
    2002
    Price
  • used | Brush diameter: 300 mm | Brush width: 110 mm | Drive power: 2.2 kW | Power connection: 380 V, 50 Hz | Dimensions L x W x H: 750 x 600 x 1100 mm | Weight approx .: 80 kg | With | - Table axially adjustable in height and angle » more

    Manufactured
    1980
    Price
  • used | Material thickness from: 1 - 6 mm | Sheet thickness: up to 6 mm | Sheet width: 100 to 1,000 mm | Sheet length: 100 to 1,000 mm | Sheet shape: sheets with notches, straight cut sheets | Materials: steel, stainless steel, NE | Max. Brush diameter: 250 mm | Brush speed: 1500/3000 rpm. | Drive ... » more

    Manufactured
    2000
    Price
  • used | Diameter: 180 mm | Workpiece length: 0 mm | Workpiece width: 1350 mm | Total power requirement: 65 kW | Machine weight approx .: 7500 kg | Dimensions of the machine ca: m » more

    Manufactured
    2002
    Price
  • used | Diameter: - mm | Workpiece length: - mm | Workpiece width: 1350 mm | Workpiece height: 4 - 150 mm | Working height: 850 mm | Sanding belt dimensions: 1400 x 2500 mm | Sanding belt speed: 22 m / sec. | Feed speed: 3 - 15 m / min | Conveyor belt: 1350 x 2200 mm | Compressed air connection: 5 - ... » more

    Manufactured
    Price
  • used | Inside trough size: 500 x 400 x 350 mm | Trough opening: 500 x 220 mm | External dimensions approx .: 2000 x 1000 x 1230 mm | With | - adjustable water supply (pump) | - Trough opening tap for removal » more

    Manufactured
    Price
  • used | Diameter: 0 mm | Workpiece length: 1000 mm | Workpiece width: 875 mm | Total power requirement: kW | Machine's weight about: t | Dimensions of the machine ca: m » more

    Manufactured
    1995
    Price
  • used | Outside dimensions: 600 x 1800 x 1300 mm | With | - Timer | - Hours counter | - Centrifuge | - Control cabinet » more

    Manufactured
    1997
    Price
  • used | - Brush diameter 250 mm | - Brush width 60 mm | - Disc speed 1500/3000 rpm | - Drive 400 V / 1.0 / 1.4 kW | - working height 900 mm | - Space requirement approx. W 650 x H 1150 x D 450 mm | - Weight approx. 100 kg » more

    Manufactured
    1993
    Price
  • used | Number of drums: 6 | Indoor size of drums: 110 x 110 x 230 mm | Outside dimensions: 950 x 1000 x 1600 mm | With | -. Sep control cabinet | - Jog | - Timer | - Removal and loading of the drums outside | - Protection cabin » more

    Manufactured
    1984
    Price
  • used | Tabletop length: 250 mm | Tabletop width: 90 mm | Tabletop height: 50 mm | Speed: 22000 rpm. | Collet: 6.0 mm | Weight: 4.5 kg | Power supply: 220 V / 50 Hz | Power: 320 W » more

    Manufactured
    Price
  • used, in good condition | Working width: 1300 mm | Brush Size: 1300 x 300 mm | Sanding belt size: 1900 x 330 mm | max. Material thickness: 150 mm | Performance of the contact roller: 16 kW | Performance of the stainless steel brush with follow Oscillation: 15 kW | . Performance of the stainless steel brush co u Up ... » more

    Manufactured
    1991
    Price

Search marketplace