Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Search marketplace

Cycle controled lathes (34 Offers)

RSS
Order by:

  • HARRISON Alpha 1400 XT Lathe

    used, very good condition | Center height: 200 mm | Distance between centers: 1250 mm | large turning Ø over bed: 400 mm | Spindle Bore: 55mm | Spindle mount: Camlock D1 6" mm | Tailstock sleeve taper: 5 MK | Spindle speeds: 1-297/1-861/1-2700 rpm | electr. Connection: 400 V, 7.5 kW | Required space: 2900 x 1800 x 1500 ... » more

    Manufactured
    2008
    Price
    –

  • P.B.R. T 30 S-NC x 1500 CNC Universal Lathe

    used | Turning Ø: over bed 625 mm | gr Turning diameter: | gr turning length: 1500 mm | Spindle bore: 105 mm | Spindle speeds: 6.6 to 2000 rpm | Space required: 4400 x 2050 x 1820 mm | Weight: 5200 kg » more

    Manufactured
    1995
    Price
    –

  • WEILER E 501 Lathe - cycle controled

    used | Swing over bed: 570 mm | Circumference diameter over slide: 340 mm | Turning length: 1100 mm | Center height: 280 mm | Distance between centers: 1000 mm | Spindle bore: 66 mm | Spindle speeds: 1 - 2500 rev / min | Feed rates - longitudinal: 0,001 - 20 mm / rev | Feed rates: 0,001 - 20 mm / ... » more

    Manufactured
    1997
    Price
    –

  • VOEST-ALPINE STEINEL W570 E2 Lathe - cycle controled

    used | Turning diameter: 570 mm | Turning length: 2000 mm | Control: | Center height: 280 mm | Swing over support: 340 mm | Bed Width: 350 mm | Spindle diameter: 100 mm | Spindle hollow 63 mm | Gear stages: 2 | Turning speed: 1-2500 r / min | Quill stroke: 160 mm | Total power requirement: 15 kW | ... » more

    Manufactured
    1990
    Price
    –

  • Gildemeister NEF 520 Cycle controlled lathe

    used | Circulation diameter over bed 500 mm | Swing diameter over cross slide 290 mm | Chuck diameter 250 mm | Spindle bore 70 mm | Spindle diameter in the front bearing 120 mm | Main drive 12 kW | Torque 920 Nm | Speed range 10-3,000 min-1 | Dimensions approx.3,400 x 1,950 x 1,825 mm | Machine ... » more

    Manufactured
    2006
    Price
    –

  • Kraft Smart T 8 Lathe

    new, very well | Control PLC with 15 inch touch screen | Turning diameter 800 cm | Turning length 3000 / 4000 / 5000 mm | Bed width 600mm | Spindle bore 104 mm, optional 130 mm | Spindle speed range continuously 14 - 1,000 rpm | Gear stages 4-stage | Frequency-controlled three-phase motor 15 kW | Machine ... » more

    Manufactured
    2023
    Price
    –

  • MONFORTS KNC 5 1500 Lathe - cycle controled

    used | Diameter: 500 mm | Turning length: 1500 mm | Control: MONFORTS CONTROL | Control: SYSTEM EURO TURN | Turning diameter over bed slide: 290 mm | Spindle bore: 70 mm | Spindle speeds: 3 - 2800 rpm | Spindle power: 15 kW | Spindle torque: 1530 Nm | Spindle head: DIN 55027 Gr. 8th | Feed force X/Z ... » more

    Manufactured
    2000
    Price
    –

  • FAT TUR 630 A CNC Lathe , CNC Draaibank , CNC Drehmaschine

    used, Sehr gut erhalten , Top Condition | FAT - TUR 630 A | Teach-in Cycle lathe Ø 630 x 2000 x Bore 140 mm | MACH - ID 6335 | Make: FAT | Type: TUR 630 A | Control: SIEMENS 810D Manual Turn | YOP: 2004 | Swing over bed Ø 630 mm | Swing over cross slide Ø 370 mm | DBC Turning Length 2.000 mm | Spindle bore 140 mm | ... » more

    Manufactured
    2004
    Price
    –

  • MONFORTS KNC 5 1000 Lathe - cycle controled

    used | Diameter: 500 mm | Turning length: 1000 mm | Control: MONFORTS CONTROL | Control: SYSTEM MTC-K | Turning diameter over bed slide: 290 mm | Spindle bore: 70 mm | Spindle speeds: 3 - 2800 rpm | Spindle power: 15 kW | Spindle torque: 1530 Nm | Spindle head: DIN 55027 Gr. 8th | Feed force X/Z ... » more

    Manufactured
    2001
    Price
    –

  • GILDEMEISTER NEF 320 K Lathe - cycle controled

    used | Turning diameter: 320 mm | Turning length: 750 mm | Control: Siemens | Type: 810DL CCUO | Swing over support: 150 mm | Cross travel: 185 mm | Spindle bore: 52 mm | Speed: 14-3550 rpm | Gear stages: 2 | Quill stroke: 120 mm | Rapid: 6 m / min | Main drive motor: 7 kW | Dreibackenfutter ... » more

    Manufactured
    2003
    Price
    –

  • MICROTURN Challenger BNC-2240X Lathe

    used, good | gebr. Lathe | Make MICROTURN | Model Challenger BNC-2240X | Machine No .: 101115989 | Year of construction 2010 | CNC control FAGOR 8055 A | Top height 275 mm | Turning length 1000 mm | Circulation Ø: | over bed 550 mm | over cross slide 310 mm | in the recess 790 mm | Length of the recess in ... » more

    Manufactured
    2010
    Price
    –

  • Weiler E 70 CNC Lathe , CNC Draaibank , CNC Drehmaschine

    used, Sehr gut erhalten , Top Condition | Schunk Rotojet 500 mm | Parat tool holder | Chip conveyor | Coolant system | Swing over bed Ø: 720mm | Swing over cross slide Ø:430mm | DBC Turning Length: 1000mm | Spindle bore: 106mm | Spindle power: 37kW | Bed width: 480mm | Stroke pinole: ... » more

    Manufactured
    2009
    Price
    –

  • COMEV CM 350 x 4000 Lathe - cycle controled

    used | Diameter: 700 mm | Turning length: 4000 mm | Control: Pico Auto Memory | Center height: 350 mm | Turning diameter over slide: 480 mm | Bar capacity: 80 mm | Tailstock MK: MK5 | Speed: 1500 rev / min | Total power requirement: 12.5 kW | Machine weight approx .: 6 t | Space requirement approx.: ... » more

    Manufactured
    1995
    Price
    –

  • KERN CD 650 Lathe - cycle controled

    used | Diameter: 650 mm | Turning diameter over the cross slide: 400 mm | Distance between centers: 3000 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m | Turning length: mm | Control: » more

    Manufactured
    1997
    Price
    –

  • GILDEMEISTER NEF 320 Lathe - cycle controled

    used | Turning diameter: 320 mm | Turning length: 750 mm | Control: Heidenhain Manual Plus | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    2001
    Price
    –

  • MONFORTS KNC5-1500 Lathe - cycle controled

    used | Turning diameter: 555 mm | Turning length: 1500 mm | Turning diameter over support: 290 mm | Three-jaw chuck diameter: 250 mm | Make: Röhn | Control: Monforts MTCK | Quick change tool holder: Multifix C | bezel: | Speed: 2-2800 rpm | Gear stages: 3 | Cross slide travel: 235 mm | Bar capacity: ... » more

    Manufactured
    1998
    Price
    –

  • VDF Boehringer DUS 800 Ti CNC Lathe , CNC Draaibank , CNC Drehmaschine

    used, Sehr gut erhalten , Top Condition | Make: VDF BOEHRINGER | Type: DUS 800 Ti | Control: SIEMENS 810D | YOP: 2006 | Hours: 6000 | 3 chuck 315 mm | 3 chuck 500 mm | Boring bar holder | Parat tool system with 4 inserts | One off last “Made in Goppingen” machine | Chip conveyor | New price EUR 152.500 |   | Swing ... » more

    Manufactured
    2006
    Price
    –

  • SAEILO Contur T-52 Lathe - cycle controled

    used | Diameter: 520 mm | Turning length: 1450 mm | Control: Heidenhain 4290 | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

    Manufactured
    2011
    Price
    –

  • BOEHRINGER DNE 820DL 3000 Lathe - cycle controled

    used | Turning diameter: 820 mm | Turning length: 300 mm | Rotation diameter over support: 465 mm | Control: | Torque on the spindle: 3000 Nm | Speed: 5.6-1120 rpm | Feed: 1-5000 mm / min | Rapid traverse: 5000 mm / min | Tailstock MK: 6 | Three-jaw chuck Forckrath: mm | Bezel: mm | Main drive ... » more

    Manufactured
    1983
    Price
    –

  • Weiler E110 / 3 Teach in Lathe , Teach in Drehmaschine , Zyklendrehmaschine

    demonstration machine, Sehr gut erhalten , Top Condition | Werner Gigant 4 chuck 1000 with max 480 Rpm | Chip conveyor | Central lubrication | Books / Manuels | Swing over bed Ø: 1100mm | Swing over cross slide Ø:730mm | Swing in the gap Ø: 1130mm | DBC Turning Length: 3000mm | Gap length: 230mm | Spindle bore: ... » more

    Manufactured
    1999
    Price
    –

  • Romi C 420 Teach in Lathe , Teach in Drehmaschine

    used, Sehr gut erhalten , Top Condition | Romi - C420 | Teach-in Cycle lathe Ø 420 x 1000 mm | MACH - ID 6311 | Make: Romi | Type: C420 | Control: Siemens 828D | YOP: 2018 | Hours: 192 | Swing over bed Ø 430 mm | Swing over cross slide Ø 200 mm | DBC Turning Length 1.000 mm | Spindle bore 53 mm | Spindle power 9 kW | ... » more

    Manufactured
    2018
    Price
    –

  • AJAX APOLLO 200 Lathe - cycle controled

    used | Turning diameter: 400 mm | Turning length: 1000 mm | Control: FAGOR | Control system: CNC 8055 / B-T | Center height: 200 mm | Distance between centers: 1000 mm | Swing diameter above the plan slide: 210 mm | Bed width: 300 mm | Spindle bore: 65 mm | Spindle speeds: 0 - 3000 rpm | Gear ... » more

    Manufactured
    2000
    Price
    –

  • DMT CD 480 Lathe - cycle controled

    used | Turning diameter: 475 mm | Distance between centers: 2000 mm | Control: Heidenhain ManualPlus 620 | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m | Turning length: mm » more

    Manufactured
    2010
    Price
    –

  • OMG CNA 325 x 1500 Lathe - cycle controled

    used | Rotating diameter: 640 mm | Turning length: 1500 mm | Control: SIEMENS SINUMERIK 820 D | Swing over support: 420 mm | Spindle bore: 65 mm | Center height: 320 mm | Distance between centers: 1500 mm | Bed width: 440mm | Spindle motor: 17 kW | Torque on the spindle: max. 162 Nm | Rapid - MD / ... » more

    Manufactured
    2001
    Price
    –

  • MONFORTS KNC5-1500 Lathe - cycle controled

    used | Turning diameter: 555 mm | Turning length: 1500 mm | Turning diameter over support: 290 mm | Dreibackenfutter Diameter: 315 mm | Make: Röhn | Control: Monforts MTCK | Quick change tool holder: Multifix C | bezel: | Speed: 2-2800 rpm | Gear stages: 3 | Cross slide travel: 235 mm | Bar ... » more

    Manufactured
    –
    Price
    –

  • Chevalier FCL 2460 Teach in Lathe , Teach in Drehmaschine , Cycle Teach in

    used, Sehr gut erhalten , Top Condition | CHEVALIER - FCL 2460 | Cycle Teach in lathe Ø 630 x 1500 mm | MACH - ID 6358 | Make: CHEVALIER | Type: FCL 2460 | Control: Fagor 8055 | YOP: 2003 | Swing over bed Ø 630 mm | Swing over cross slide Ø 400 mm | DBC Turning Length 1.500 mm | Spindle bore 80 mm | Spindle power 15 kW ... » more

    Manufactured
    2003
    Price
    –

  • BOEHRINGER DNE 820DL 5000 Lathe - cycle controled

    used | Turning diameter: 820 mm | Turning length: 5000 mm | Turning diameter over support: 460 mm | Control: B2T | Torque on the spindle: 3400 Nm | Speed: 5.6-1120 rpm | Feed: 1-5000 mm / min | Rapid traverse: 5000 mm / min | Tailstock MK: 6 | Three-jaw chuck Forckrath: 630 mm | Bezel: 525 mm | ... » more

    Manufactured
    –
    Price
    –

  • SAEILO CONTUR Dialog HS-71 Lathe - cycle controled

    new | Diameter: 720 mm | Turning length: 2000 mm | Control: 840D SL + ShopTurn Siemens | Swing over bed: 720 mm | Swing diameter max. Via slide gate: 460 mm | Bed width: 433 mm | Speed range - main spindle: max. 2,500 rpm | Power capacity - spindle: 18.5 kW | Spindle bore: 120 mm | Spindle head: D ... » more

    Manufactured
    –
    Price
    –

  • Ecoca EL 4615 E Teach in Lathe , Teach in Drehmaschine

    used, Sehr gut erhalten , Top Condition | ECOCA - EL 4615 E | Teach-in Cycle lathe Ø 460 x 1500 mm | MACH - ID 6369 | Make: ECOCA | Type: EL 4615 E | Control: Fagor 8055 | YOP: 2003 | Swing over bed Ø 460 mm | Swing over cross slide Ø 258 mm | Swing in the gap Ø 670 mm | DBC Turning Length 1.500 mm | Spindle bore 58 mm ... » more

    Manufactured
    2003
    Price
    –

  • PBR T35 SNC / 3000 Teach in Lathe , Teach in Drehmaschine , Zyklendrehmaschine

    used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 720mm | Swing over cross slide Ø:478mm | DBC Turning Length: 3000mm | Spindle bore: 105mm | Spindle power: 15kW | Bed width: 450mm | Tailstock spindle Ø: 100Ø | Stroke pinole: 200mm | Spindle taper: 5Mk | ... » more

    Manufactured
    1994
    Price
    –

alle 34 Einträge anzeigen

Search marketplace