Info: Portions of this page have been automatically translated using Google Translate. HIDE FROM NOW close

Center lathes (379 Offers)

RSS
Order by:
  • used, well used | Specifications: | - Center height 315 mm | - Distance between centers 2000 mm | - largest circulation – Ø over bed 630 mm | via cross slide 340 mm | - Spindle bore 73.5 mm | - Taper of the tailstock quill MK 5 | - Travel of the tailstock quill 200 mm | - Spindle speeds 10 - 1000 rpm | - Feeds ... » more

    Manufactured
    1998
    Price
  • used, Very Good general condition | L + Z lathe GEMA LZ 160 04-03-101 | Delivery time: immediately | Number: 04-03-101 | MACHINE DATA | Year of construction: approx. 1971 | L x W x H: approx. 2000 x 1200 x 1500 mm | Weight: approx. 1000 kg | Very Good general condition | TECHNICAL SPECIFICATIONS | Dimensions: | Max. Turning ... » more

    Manufactured
    1971
    Price
  • used, Very Good general condition | L + Z lathe Weiler DA 260x1000 * PARTLY REFURBISHED * 04-03-097 | Delivery time: immediately | Number: 04-03-097 | MACHINE DATA | Year of construction: approx. 1994 | L x W x H: approx. 3000 x 1200 x 1800 mm | Weight: approx. 1600 kg | Very good general condition | * PART OBSOLETE * | ... » more

    Manufactured
    1994
    Price
  • used, Very Good general condition | L + Z TURNING MACHINE WEILER CONDOR VS | 1 - 04-03-137 | Delivery time: immediately | Number: 04-03-137 | Manufacturer: Weiler | Type: Condor VS 1 | MACHINE DATA | Year of construction: approx. 1981 | L x W x H: approx. 1800 x 1000 x 1800 mm | Weight: approx. 800 kg | Very Good general ... » more

    Manufactured
    1981
    Price
  • used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Swing over bed Ø 330 mm | Control Conventionel | Swing over cross slide 210 mm | Distance between centres 1000 mm | Spindle bore 36 / 25 mm | Spindle speeds / ranges 30 - 2500 Rpm | Power 2.2 Kw | - incl. collet device + inserts 29 pieces 2 - 30 mm | - incl. 3 chuck ... » more

    Manufactured
    1989
    Price
  • used, Very good general condition | L + Z TURNING MACHINE WEILER PRAKTIKANT | 500 R * PART OVERHOLDER * - 04-03-192 | Delivery time on request | Number: 04-03-192 | Manufacturer: Weiler | Type: Intern 500 R * partially overhauled * | MACHINE DATA | Year of construction: approx. 1980 | L x W x H: approx. 1400 x 800 x 1500 mm | ... » more

    Manufactured
    1980
    Price
  • used | Height: 205 mm | Tip width: 1500 mm | Rotating diameter over bed: 410 mm | Rotation diameter over support: 282 mm | 12 Speeds: 26 - 1250 rpm. | 44 Longitudinal feeds: 0.03 - 1.1 mm / rev. | 44 Face feed rates: 0.006 - 0.23 mm / rev. | 44 Steep feeds lengthwise: 0.24 - 8.8 mm / rev. | 44 Face ... » more

    Manufactured
    1962
    Price
  • used, Sehr gut erhalten, Very good Condition | Make Wagner DCS 180 | Type DCS 180 x 900 | Year 1992 | 3 axis Heidenhain dro | Centre height (mm) Swing bed = 360 | Center distance (mm) DBC = 900 | Spindle bore Bore = 46 | incl. Multi fix tool | incl. some inserts | incl. 3 chuck | www.mach4metal.com » more

    Manufactured
    1992
    Price
  • used, well used | Specifications: | - max. turning diameter over bed 1600 mm | - over cross slide 1200 mm | - Center height 820 mm | - Distance between centers 2000 mm | - Spindle bore 123 mm | - Spindle speeds 7.8 - 400 rpm | - Feeds longitudinal / plan | - Tailstock | - Faceplate with 2 sets of jaws 1600 mm ... » more

    Manufactured
    1975
    Price
  • used | Tip height: 165 mm | Distance between centers: 750 mm | Turning diameter over bed: 330 mm | Turning diameter in the crank: 480 mm | Spindle bore: 42 mm | Spindle holder: DIN 55022/5 | 18 spindle speeds: 30 - 2000 rpm. | 20 feeds: 0.047 - 0.86 mm / rev | 20 cross feeds: 0.021 - 0.39 mm / rev | ... » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 4156 | MAKE Weiler Germany | TYPE PRIMUS | YEAR | SPECIFICATIONS | Swing over bed Ø 240 mm | Swing over cross slide 195 mm | Distance between centres 430 mm | Spindle bore 23 mm | Spindle speeds / ranges 3000 Rpm | Power 1.5 Kw | DIMENSIONS | Length ... » more

    Manufactured
    Price
  • new, new | Machine according to DIN 8605: Lathe with increased accuracy. | Distance between centers: 700 mm | Center height: 170 mm | Swing over bed: 340 mm Ø | Swing over cross slide: 190 mm | Bed width: 260 mm | Displacement longitudinal slide: 600 mm | Displacement cross slide: 220 mm | Displacement ... » more

    Manufactured
    Price
  • new | Distance between centers; 1000 mm | Center height: 200 mm | Circumference diameter over bed: 400 mm | Circumference diameter over offset: 560 mm | Circumferential diameter over cross slide: 240 mm | Bed width: 210 mm | Spindle bore: 52 mm | Spindle mount: DIN 55029, D1-5 | Speed ​​range: (12) ... » more

    Manufactured
    Price
  • new | Diameter above the bed: 360 mm | Turning diameter over support: 220 mm | Turning length: 1000 mm | Turning diameter in the crank: 500 mm | Speed: 70 - 2000 rev / min | Center height: 180 mm | Spindle bore: 38 mm | Tailstock MK: 4 | Supply voltage: 400 V | Total power requirement: 1,5 kW | ... » more

    Manufactured
    Price
  • new | Swing over bed: 250 mm | Swing over support: 140 mm | Turning length: 550 mm | Speed: 125 - 2000 rpm | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Tailstock quill stroke: 65 mm | Supply voltage: 230 V | Total power requirement: 0,75 kW | Machine weight ... » more

    Manufactured
    Price
  • used, Sehr gut erhalten , Top Condition | MACH-id 5209 | MAKE EMCO Austria | TYPE EMCOmat EM17D | YOP 1998 | SPECIFICATIONS | Swing over bed Ø 340 mm | Swing over cross slide 190 mm | DBC Turning length 700 mm | Spindle bore 50 mm | Bed width 260 mm | Stroke pinole 120 ... » more

    Manufactured
    1998
    Price
  • used, Very good general condition | L + Z TURNING MACHINE WEILER PRAKTIKANT | 160 * PART OVERHOLDER * - 04-03-218 | Delivery time on request | Number: 04-03-218 | Manufacturer: Weiler | Type: Intern 160 * Partially overhauled * | MACHINE DATA | Year of construction: approx. 1993 | L x W x H: approx. 1700 x 1000 x 1700 mm | ... » more

    Manufactured
    1993
    Price
  • used | Center height: 165 mm | Distance between centers: 750 mm | Spindle bore: 40 mm | Tailstock taper MK: 3 | Weight of the machine ca .: 1150 kg » more

    Manufactured
    1988
    Price
  • new | Swing over bed: 320 mm | Turning diameter over support: 220 mm | Turning length: 600 mm | Turning diameter in the offset: 320 mm | Speed: 60 - 1650 rpm | Center height: 160 mm | Spindle bore: 38 mm | Tailstock MK 3 MK | Supply voltage: 400 V | Total power requirement: 1,1 kW | Weight of the ... » more

    Manufactured
    Price
  • new | Swing over bed: 250 mm | Swing over support: 140 mm | Turning length: 550 mm | Speed: 50 - 2000 rpm / min | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Tailstock quill stroke: 65 mm | Supply voltage: 230 V | Total power requirement: 1,1 kW | Machine weight ... » more

    Manufactured
    Price
  • used, Very Good general condition | L + Z lathe Weiler DA 260 x 1500 04-03-161 | Delivery time: immediately | Number: 04-03-161 | MACHINE DATA | Year of construction: approx. 1997 | L x W x H: approx. 3000 x 1200 x 1800 mm | Weight: approx. 1600 kg | Very good general condition | TECHNICAL SPECIFICATIONS | Digital display: 3 ... » more

    Manufactured
    1997
    Price
  • used, very well | Tip height: 205/305 mm | Distance between centers: 1500 mm | Spindle bore: 51 mm | Speed range: 25 - 2000 rpm | Total power requirement: 7.5 KW / 400 V | Machine weight: approx. 2300 kg | Equipment / accessories: | Rapid support | 3 - jaw chuck 250 mm | 4-jaw face plate 400 mm - jaws ... » more

    Manufactured
    1980
    Price
  • used, Very Good general condition | L + Z lathe Weiler Matador VS 2 04-03-162 | Delivery time: immediately | Number: 04-03-162 | MACHINE DATA | Year of construction: 1987 | L x W x H: approx. 1500 x 1000 x 1700 mm | Weight: approx. 600 kg | Very good general condition | TECHNICAL SPECIFICATIONS | Digital display: 3-axis digital ... » more

    Manufactured
    1987
    Price
  • used, Sehr gut erhalten , Top Condition | MAKE ZMM Sliven | TYPE HU 310 VAC | YEAR 1999 | SPECIFICATIONS | Swing over bed Ø 320 mm | Swing over cross slide 185 mm | Distance between centres 750 mm | Work piece weight 100 kg | Spindle bore 32 mm | Spindle speeds / ranges Vario 2200 Rpm | Bed width 200 mm | Power ... » more

    Manufactured
    1999
    Price
  • used, Sehr gut erhalten , Top Condition | TOS - SN 500 SA | Universal turning lathe Ø 505 x 2000 mm | MACH - ID 6328 | Make: TOS | Type: SN 500 SA | YOP: 2003 | Swing over bed Ø 505 mm | Swing over cross slide Ø 270 mm | Swing in the gap Ø 700 mm | DBC Turning Length 2.000 mm | Gap length 230 mm | Spindle bore ... » more

    Manufactured
    2003
    Price
  • used, good (used) | Leit and spindle lathe WEILER LZD 220 | including 2 axis digital display | Center height approx. 110mm | Center distance approx. 450mm | Spindle bore approx. 23mm | Speed range / continuously adjustable | Automatic longitudinal / transverse feeds | chip rear wall | machine feet | work light | ... » more

    Manufactured
    1974
    Price
  • used | Diameter: 580 mm | Turning length: 1500 mm | Swing over bed slide: mm | Spindle speeds: 28 - 2800 rpm | Spindle bore: 28 mm | Quill stroke: 220 mm | Machine's weight about: 3500 kg » more

    Manufactured
    Price
  • new, new | Made in Italy | Machine according to DIN 8606 | Center height: 260 mm | Turning diameter over bed: 520 mm | Turning diameter over slide: 300 mm | Tip width: 1,500 mm | Bed width: 400 mm | Spindle bore: 82 mm | Spindle nose: Camlock 8 " | Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 ... » more

    Manufactured
    Price
  • used, Sehr gut erhalten, Very good Condition | Make TOS SN 500S | Type Trencin SN 500 S | Year 1998 | 2 axis SONY dro | Centre height (mm) Swing bed = 505 | Center distance (mm) Swing sup = 270 | Spindle bore DBC = 1.000 | Bore = 77 | Mk 5 pinole / 2000 Rpm | Steady / chuck / etc.. | www.mach4metal.com » more

    Manufactured
    1998
    Price
  • used | Distance between centers: 330 mm | Tip height: 84 mm | Bed width: 76 mm | Spindle bore: 15.5 mm | Turning diameter over support: 98 mm | Infeed per division: 0.02 mm | 12 spindle speeds: 25 - 2150 mm | Thread pitches metric: 0.2 - 3.5 mm | Thread pitches inch: 8 - 28 Gg / 1 " | Feeds: 0.1 - ... » more

    Manufactured
    Price

Search marketplace