Pilous ARG 330 Plus F Bandsaw - Horizontal

Very robust machine framework composes of castings from grey cast iron
andensures vibration absorption.
In order to achieve maximum stiffness of the whole system and cutting accuracy,
the band saw arm is attached to a sturdy turntable on both sides in massive
housing fitted with pre-stressing tapered roller bearings.
Modern concept of the band saw arm allows for large cutting ranges in both
upright and angular cutting.
Massive arm turning system with large loading surfaces ensures exceptional
stability of the machine even when cutting heavy workpieces.
Simple locking and adjusting of the desired cutting angle on the angle scale
with stops fixed at 60° to the right and 45° to the left.
Massive quick-clampingvice ensures easy and reliable material clamping.
Large diameter running wheels and precise three-side hardmetal guiding ensure
long service life of the band and cutting accuracy. Large diameter running
wheels and precise three-side hardmetal guiding ensure long service life of the
band and cutting accuracy.
Overdesign of running wheel bearings, tensioning wheel system and all rotary
parts ensures long service life of the machine.
Noiseless and maintenance-free band drive is provided by an industrial electric
motor with worm gearbox. The machine is connected to a complete cooling system
with a high-performance pump and possibility of regulating the flow on both
guiding heads independently. Coolant tank with a pump is placed in the base of
the machine.
All of electrical wiring and coolant distribution are concealed in hollow parts
of the arm which means they are protected from damage.
The new concept of the arm also brings a great simplification when changing the
saw band or when cleaning the inside of the arm. You just need to open the
hinged back cover of the arm and it will stay locked in the upper position.
The machine checks correct tension or break of the saw band. If the saw band
breaks the machine automatically switches off.
Easy control by ergonomically placed controls (electrical and hydraulics) on
the base of the machine.
The machine is equipped with a hinged stop with a 500mm scale. Hinged system
revents the workpiece from jamming during cutting

<small>The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.</small>