Offer of a used machine in straightening presses
|Model:||GALDABINI RPRS 160|
|Condition:||used, good - inspected under power|
Pressure performance of the upper piston 160 to
Printing services in return 8 to
Table size 330 x 2,200 mm
Table height over floor 1,100 mm
Height max. 500 mm
Projection center of the piston to stand 320 mm
Pin hole in the piston-Æ mm
Stroke of the upper piston 200 mm
Straightening stroke 100 mm
Piston Æ 250 mm
Lifting speed down - mm / min.
Upward - mm / min.
Pump drive 11 kW
Total electrical load 12 kW - 380 V - 50 Hz
Weight about 8000 kg
Machine height 3.000 mm
· Machine was used to direct heavy pipe parts and axles
Unfortunately missing various parts for the target table (top bracket roller block or 2) and
the automatic sequence of the machine lacks the transducer. These parts can certainly be procured from the manufacturer.
· The Richthublänge is adjusted by a hand wheel at the table, the maximum depth is about a
Set end stop on the piston. The return stroke can also be set.
The stroke is triggered by a foot pedal.
· Built-straightening table with 2 movable and height-adjustable workpiece support blocks and a height-adjustable roller block, and about 5 m table extensions with matching stands.
· Pendulum control panel with display of bending or the elevation of the workpiece,
However, without the necessary transducers. In the cabinet there is a
SIEMENS PLC Type S 5
|Serial number:||3369 1|
|Terms of delivery:||immediately from stock|
Ähnliche Einträge in der Kategorie Straightening Presses
Used machine | Leveling force: 40 t | Stroke: 160 mm | ram from: 66 mm / sec. | Ram to 170 mm / sec. | Operating pressure: 200 bar | Table size: 1500 x 410 mm | Depth 250 mm | max. Wavelength: 500 - 5000 mm | Height of centers: 180 mm | Power: 4 kW | Weight: 3,2 t | Dimensions: 1270 x 1500 x 2700 mm ... » more