Center lathes (328 Offers)

used | Technical data: | Centre height: 220 mm | Centre width: 1000 mm | Spindle bore: 55 mm | Bed width: 430 mm | Speeds, 2-stage: 18 - 1800 rpm | Tailstock mount: MK 4 | Quill stroke: 190 mm | Feed: 0.30 - 3.26 mm/rev | Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm | Equipment: | - Multifix ... » more

used | Technical data: | Centre height: 230 mm | Centre width: 1000 mm | Swing diameter over bed: 475 mm | Swing diameter over bed slide: 320 mm | Spindle bore: 50 mm | Bed width: 300 mm | Speeds: (18) 25 - 2240 1/min | Motor power: 3.5 / 6 kW, 2-stage | Tailstock mount: MK 4 | Quill stroke: 120 mm ... » more

new | Swing over bed: 400 mm | Turning diameter over support: 264 mm | Turning length: 1000 mm | Turning diameter in the crank: 550 mm | Speed: 44 - 2000 rpm | Center height: 200 mm | Spindle bore: 52 mm | Tailstock mount MK: 4 MK | Supply voltage: 400 V | Total power requirement: 1.5 / 2.4 kW | ... » more

used, Sehr gut erhalten, Very good Condition | Make Wagner DCS 180 | Type DCS 180 x 900 | Year 1992 | 3 axis Heidenhain dro | Centre height (mm) Swing bed = 360 | Center distance (mm) DBC = 900 | Spindle bore Bore = 46 | incl. Multi fix tool | incl. some inserts | incl. 3 chuck | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Swing over bed Ø 330 mm | Control Conventionel | Swing over cross slide 210 mm | Distance between centres 1000 mm | Spindle bore 36 / 25 mm | Spindle speeds / ranges 30 - 2500 Rpm | Power 2.2 Kw | - incl. collet device + inserts 29 pieces 2 - 30 mm | - incl. 3 chuck ... » more

new | Swing over bed: 250 mm | Swing over support: 140 mm | Turning length: 550 mm | Speed: 50 - 2000 rpm / min | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Tailstock quill stroke: 65 mm | Supply voltage: 230 V | Total power requirement: 1,1 kW | Machine weight ... » more

used, Sehr gut erhalten , Top Condition | Accurite digital read out system 2 axis | 2x Steady rest 50 - 300 mm | 2x Steady rest 200 - 500 mm | Feeds all directions | 4 chuck 800 mm | DBC Turning Length: 12000mm | Swing over bed Ø: 930mm | Swing over cross slide Ø:620mm | Spindle bore: 95mm | Bed width: ... » more

new | Swing over bed: 320 mm | Turning diameter over support: 220 mm | Turning length: 600 mm | Turning diameter in the offset: 320 mm | Speed: 60 - 1650 rpm | Center height: 160 mm | Spindle bore: 38 mm | Tailstock MK 3 MK | Supply voltage: 400 V | Total power requirement: 1,1 kW | Weight of the ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5209 | MAKE EMCO Austria | TYPE EMCOmat EM17D | YOP 1998 | SPECIFICATIONS | Swing over bed Ø 340 mm | Swing over cross slide 190 mm | DBC Turning length 700 mm | Spindle bore 50 mm | Bed width 260 mm | Stroke pinole 120 ... » more

new, new | Machine according to DIN 8605: Lathe with increased accuracy. | Distance between centers: 700 mm | Center height: 170 mm | Swing over bed: 340 mm Ø | Swing over cross slide: 190 mm | Bed width: 260 mm | Displacement longitudinal slide: 600 mm | Displacement cross slide: 220 mm | Displacement ... » more

used | Diameter above the bed: 280 mm | Rotation diameter over support: 155 mm | Turning diameter in the offset: 350 mm | Turning length: 800 mm | Speed: 26 - 2000 rpm | Spindle bore: 24 mm | Connected load: 1.6 kW | Machine weight approx .: 0,7 t | Dimensions L x W x H: 1.55 x 0.8 x 1.3 m » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø 520 mm | Distance between centres 1000 mm | Spindle bore 55 mm | Spindle speeds / ranges 1120 Rpm | www.mach4metal.com » more

used | Turning length: 750 mm | Diameter above the bed: 280 mm | Swing over support: 178 mm | Spindle speed: 52 - 2000 rpm. | Spindle Bore: 35.0mm | Tailstock quill holder MT: MT 3 | Quill stroke: 95.0 mm | Bed width: 190 mm | Adjustment: Upper 92.0 mm | Adjustment: plan 165 mm | Total power ... » more

used, Good Condition | Merk TOS SN 500 SA | Type SN 500 SA | Jaar 2000 | Tos sn 500 draaibank luz drehmaschine | Center hoogte (mm) Swing bed = 505 | Center afstand (mm) DBC = 2.000 | Doorlaat (mm) Bore = 77 | 2.000 Rpm / Feeds / Rapid | 3 x Steady rest | 1 x 2 Axis dro | www.mach4metal.com » more

used | Turning length: 1650 mm | Swing over bed: 410 mm | Swing over support: 240 mm | Turning speed: 28 - 1250 rpm / min | Spindle bore: 52.0 mm | Morse taper: MK 4 | Quill stroke: 110 mm | Bed width: 320 mm | Total power requirement: 5.5 kW | Weight of the machine approx .: 2200 kg. | Space ... » more

new | Distance between centers; 1000 mm | Center height: 200 mm | Circumference diameter over bed: 400 mm | Circumference diameter over offset: 560 mm | Circumferential diameter over cross slide: 240 mm | Bed width: 210 mm | Spindle bore: 52 mm | Spindle mount: DIN 55029, D1-5 | Speed ​​range: (12) ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4156 | MAKE Weiler Germany | TYPE PRIMUS | YEAR | SPECIFICATIONS | Swing over bed Ø 240 mm | Swing over cross slide 195 mm | Distance between centres 430 mm | Spindle bore 23 mm | Spindle speeds / ranges 3000 Rpm | Power 1.5 Kw | DIMENSIONS | Length ... » more

new | Turning diameter over bed: 290 mm | Swing over support: 170 mm | Turning length: 750 mm | Speed: 75 - 2000 rpm | Top height: 145 mm | Spindle bore: 38 mm | Tailstock MK 3 MK | Tailstock lifting stroke: 80 mm | Supply voltage: 230 V | Total power requirement: 1,5 kW | Machine weight approx .: ... » more

used, Sehr gut erhalten, Very good Condition | Make Oerlikon DM6A | Type DM 6 A | Year 60 er | heavy duty lathe schwerdrehmaschine draaibank | Centre height (mm) Swing = 1.500 | Center distance (mm) DBC = 10.000 | Spindle bore Speeds 300 Rpm | 4 chuck 1.500 mm | 3 x Steady rest | Under power | www.mach4metal.com » more

new, new | Made in Italy | Machine according to DIN 8606 | Center height: 260 mm | Turning diameter over bed: 520 mm | Turning diameter over slide: 300 mm | Tip width: 1,500 mm | Bed width: 400 mm | Spindle bore: 82 mm | Spindle nose: Camlock 8 " | Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4138 | MAKE Colchester | TYPE Mascot 2000 | YEAR 2000 | SPECIFICATIONS | Swing over bed Ø 460 mm | Swing over cross slide 410 mm | Distance between centres 2000 mm | Spindle bore 76 mm | Spindle speeds / ranges 2000 Rpm | Power 11 Kw | ... » more

used, Sehr gut erhalten, Very good Condition | Make TOS SN 500S | Type Trencin SN 500 S | Year 1998 | 2 axis SONY dro | Centre height (mm) Swing bed = 505 | Center distance (mm) Swing sup = 270 | Spindle bore DBC = 1.000 | Bore = 77 | Mk 5 pinole / 2000 Rpm | Steady / chuck / etc.. | www.mach4metal.com » more

used | Technical data: | Center height: 190 mm | Center width: 1000 mm | Spindle bore: 63 mm | Bed width: 305mm | Speeds: 25 - 2000 1/min | Drive power: 5 kW | Tailstock mount: MK 4 | Quill stroke: 150 mm | Feeds: 0.022 - 0.800 mm/rev | Weight, approx.: 1500 mm | Dimensions (WxDxH), approx.: 2160 x ... » more

used | Swing over bed: 400 mm | Turning diameter over slide: 250 mm | Turning length: 1200 mm | Swing in the crank: mm | Speed: max. 2500 rpm | Center height: 200 mm | Spindle bore: 45 mm | Total power requirement: 7.5 kW | Machine weight approx .: 1,9 t | Room requirement approx .: 2.6 x 1.4 x 1.6 m » more

new | Diameter above the bed: 360 mm | Turning diameter over support: 220 mm | Turning length: 1000 mm | Rotating diameter in the crankshaft: 380 mm | Speed: 70 - 2000 rev / min | Center height: 180 mm | Spindle bore: 50 mm | Tailstock MK 3 MK | Connection voltage: 230 or 400 V | Total power ... » more

used, Good | Center Height: 165mm | Distance between centers: 750 mm | Spindle Bore: 38mm | Bed width: 195 mm | Speeds: (16) 35 - 2480 rpm | Motor power: 2.5 / 2.0 kW | Tailstock mount: MK3 | Quill stroke: 100 mm | Dimensions, approx.: 1650 x 540 x 1450 mm | Furnishing: | - 3-jaw lathe chuck | - Emergency ... » more

used, Sehr gut erhalten , Top Condition | TOS - SN 500 SA | Universal turning lathe Ø 505 x 2000 mm | MACH - ID 6328 | Make: TOS | Type: SN 500 SA | YOP: 2003 | Swing over bed Ø 505 mm | Swing over cross slide Ø 270 mm | Swing in the gap Ø 700 mm | DBC Turning Length 2.000 mm | Gap length 230 mm | Spindle bore ... » more

used | Technical data: | Center height: 190 mm | Center width: 1000 mm | Spindle bore: 56 mm | Bed width: 305mm | Speeds: 25 - 2000 1/min | Drive power: 4 kW | Tailstock mount: MK 4 | Quill stroke: 150 mm | Feeds: 0.022 -0.800 mm/rev | Weight, approx.: 1500 kg | Dimensions (WxDxH), approx.: 2160 x ... » more

used | Swing over bed: 330 mm | Swing over support: 170 mm | Turning length: 800 mm | Spindle bore: 38 mm | Tailstock MK: 3 | Spindle speeds - infinitely variable: 24 - 2800 rpm | Longitudinal movement on the bed: 0.026 - 1.253 mm | Feed cross beam support horizontally: 0.013 - 0.628 mm/rev | Quill ... » more

used, good | HAMMET - E35 | Control - CNC | Tip height: approx. 200mm | Center width: approx. 950mm | Max. circulation over bed: approx. 410mm | Max. circulation over plan cuts: approx. 200mm | Max. circumferential offset approx. 440mm | Max. workpiece weight: approx. 900kg | Speed range from approx. 1 ... » more

used, Sehr gut erhalten , Very good Condition | Make Skoda SRM 100 | Type SRM 100 x 5000 | Year 1976 | Heavy Duty Lathe | Centre height (mm) Swing bed = 1.000 | Center distance (mm) DBC = 5.000 | Spindle bore Work load = 14 T | incl. 4 chuck 1000 mm | incl. steady rest 500 mm | Power 40 kW / bed width 950 | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition | Make ZMM 1.000 mm | Type C 13 SH | Year 2001 | zmm draaibank drehmaschine lathe machine | Centre height (mm) Swing = 1.000 | Center distance (mm) DBC = 1.500 | Spindle bore Bore = 155 | Speeds 22 steps 1.000 Rpm | 2 axis digital readout | 4 chuck 1.000 mm\ | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | Make TOS SU 125 | Type SU 125 x 4 | Year 80 er | Heavy Duty turning lathe | Centre height (mm) Swing bed = 1.250 | Center distance (mm) Support = 940 | Spindle bore DBC = 4.000 | Bore = 102 | 4 chuck 1250 | 3 x steady rest | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MAKE ZMM Sliven | TYPE HU 310 VAC | YEAR 1999 | SPECIFICATIONS | Swing over bed Ø 320 mm | Swing over cross slide 185 mm | Distance between centres 750 mm | Work piece weight 100 kg | Spindle bore 32 mm | Spindle speeds / ranges Vario 2200 Rpm | Bed width 200 mm | Power ... » more

used, Sehr gut erhalten , Top Condition | MAKE Stanko Russia | TYPE 16 K 40 | YEAR 2003 | SPECIFICATIONS | Swing over bed Ø 830 mm | Swing over cross slide 480 mm | Distance between centres 4000 mm | Work piece weight 4000 kg | Spindle bore 110 mm | Spindle speeds / ranges 1250 Rpm | www.mach4metal.com » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feeds: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x ... » more

used, good | Offer 24009 | Specifications: | - Center height 200 mm | - Center width 1500 mm | - Largest circulation – Ø over bed 400 mm | - over cross slide 210 mm | - Spindle bore 56 mm | - Mounting cone of the tailstock quill MK 5 | - Travel of the tailstock quill 150 mm | - Spindle speeds 11 - 2240 ... » more

used, Sehr gut erhalten , Top Condition | 3 Axis Digital readout ( SIEMENS-WEILER) | Variomatic feeds & speeds | 3 chuck with CE-Guider | MultiFix Quick change toolholder system with 9 inserts | Fixed steady rest | Machine with Book / Instruction / Coolant / CE-Mark | DBC Turning Length: 650mm | Swing over bed Ø: ... » more

used, good | WEILER CONDOR including new digital display / original paint » more

used | Swing over bed: 330 mm | Swing over support: 170 mm | Turning length: 800 mm | Center height: 155 mm | Distance between centers: 800 mm | Spindle bore: 38 mm | Turning speed: 24 - 2800 r / min | Spindle head: DIN 55022 Gr. 5 | Feeds - longitudinal: 0.026 - 1.253 mm/rev | Feeds - plane: 0.013 ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4208 | MAKE VDF Boehringer | TYPE DUE 500 | YEAR 2004 | SPECIFICATIONS | Swing over bed Ø 520 mm | Swing over cross slide 315 mm | Distance between centres 1000 mm | Work piece weight 1500 kg | Spindle bore 62 mm | Spindle speeds / ranges ... » more

new, new | MCM T 215 x 1000 master lathe | Made in Italy | Machine according to DIN 8605: Lathe with increased accuracy. | Top height: 215 mm | Turning diameter over bed: 430 mm | Turning diameter over slide: 240 mm | Tip width: 1,000 mm | Bed width: 290 mm | Spindle bore: 52 mm | Spindle nose: Camlock ... » more

new | Swing over bed: 250 mm | Swing over support: 140 mm | Turning length: 550 mm | Speed: 125 - 2000 rpm | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Tailstock quill stroke: 65 mm | Supply voltage: 230 V | Total power requirement: 0,75 kW | Machine weight ... » more

used | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1500 mm | Swing in the crank: mm | Speed: 10 - 1400 rpm | Center height: 250 mm | Spindle bore: 56 mm | Total power requirement: kW | Machine weight approx: 2,3 t | Space requirement approx .: 3.2 x 1.3 x 1.5 m » more

used, good | WEILER PRIMUS VC | -CE - identifier | -Year of construction 2001 | -Top height 140mm | -Center width 500mm | -Circulation over bed 280mm | -Circulation over cross slide 135mm | -Speed range / continuously variable 30 - 4000rpm | -Spindle passage 40mm | -Spindle head Din 55027 - size 5 | ... » more

used | Turning length: 1000 mm | Turning diameter over bed: 640 mm | Swing over support: 380 mm | Spindle speeds: 9.0 - 1800 rpm | Spindle bore: 65.0 mm | Morse taper: MK 5 | Quill stroke: 225 mm | Bed width: 405 mm | Spindle holder: DIN 55022 size. 8th | Adjustment: plan 410 mm | Adjustment: Upper ... » more

used, good - used | Leit and spindle lathe WEILER CONDOR incl. newer | digital display | -Original paint | -Turning diameter over bed 330mm | -Turning diameter over support 170mm | -Turning length 800mm | -Center height 160mm | -Spindle bore 38mm | -Spindle speeds 24-2800 rpm | -Automatic longitudinal/cross ... » more

used, Sehr gut erhalten , Very good Condition | Make TOS SUA 80 | Type Celakovice SUA 80 Numeric | Year 2001 | TOS Celakovice SUA 80 Numerisch gesteuerte | Centre height (mm) Swing bed = 840 | Center distance (mm) DBC = 2.000 | Spindle bore Bore = 128 | HeidenHain Manuel Plus | Steady rest fixed | 3 chuck 500 mm | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MACH-id 4178 | MAKE TOS TRENSIN | TYPE SN 710 | YEAR 2007 | SPECIFICATIONS | Swing over bed Ø 720 mm | Swing over cross slide 430 mm | Swing in the gap Ø 960 mm | Distance between centres 2000 mm | Spindle bore 105 mm | Spindle speeds / ranges 1600 Rpm ... » more

used, Sehr gut erhalten, Very good Condition | Make VDF DUE 630 | Type DUE 630 | Year 1981 | Universal turning lathe | Centre height (mm) Swing = 640 | Center distance (mm) DBC = 5.000 | Spindle bore Bore = 82 | 3 axis digital read out | 3 chuck 320 mm | Power 22 kW | www.mach4metal.com » more

used | Swing over bed: 330 mm | Swing over support: 170 mm | Turning length: 800 mm | Center height: 155 mm | Distance between centers: 800 mm | Spindle bore: 38 mm | Turning speed: 24 - 2800 r / min | Spindle head: DIN 55022 Gr. 5 | Feeds - longitudinal: 0.026 - 1.253 mm/rev | Feeds - plane: 0.013 ... » more

used, good (used) | WEILER DA 210 / 3-axis digital display Heidenhain | Including CE mark - ORIGINAL CONDITION | Center height 210mm | Center distance 1000mm | Swing over bed 435mm | Circumference diameter over facing slide 245mm | Cjr3wkhxxx | Spindle bore 52mm | Speed range 40-2000 rpm | Automatic longitudinal ... » more

used | Peak height: above the upper bed 300 mm | Distance between centers: 1500 mm | Turning Ø: 640 mm above the upper bed | Spindle bore: 67 mm | Spindle taper: Gr. 8 | Taper tailstock: 5 MK | Spindle speeds: 18-900 rpm | Feeds: Longitudinal / transverse from 0.063 to 2 / 0.032 to 1 mm / rev | ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5211 | MAKE Optimum | TYPE D 420 x 1500 DPA | YOP 2000 | SPECIFICATIONS | Swing over bed Ø 420 mm | Swing over cross slide Ø 255 mm | Swing in the gap Ø 590 mm | Gap length 240 mm | Spindle bore 52 mm | Bed width ... » more

new | Diameter above the bed: 460 mm | Swing over support: 274 mm | Turning length: 1500 mm | Spindle bore: 58 mm | Turning speed: 25 - 2000 rev / min | Swing in the crank: 690 mm | Metric threads: 41 / 0.1 to 14 mm | Thread - inch 60/2 - 112 inches. | Thread - Module: 34 / 0.1 - 7 mm | Whitworth ... » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feed: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x 880 ... » more

used | Technical data: | Center height: 160 mm | Center width: 800 mm | Spindle bore: 40 mm | Bed width: 240mm | Speeds: 12 - 2800 1/min | Drive power: 3 kW | Tailstock mount: MK 3 | Quill stroke: 110 mm | Feeds: 0.037 - 1.253 mm/rev | Weight, approx.: 800 kg | Dimensions (WxDxH), approx.: 1930 x ... » more

used | Swing over bed: 430 mm | Turning diameter over slide: 260 mm | Turning length: 1000 mm | Swing in the crank: mm | Speed: 20 - 2500 rpm | Center height: 210 mm | Spindle bore: 55 mm | Total power requirement: 7.5 kW | Machine weight approx .: 1,9 t | Space required approx.: 3.2 x 1.4 x 1.6 m » more

used | Turning length: 800 mm | Circumference diameter over bed: 297 mm | Circumferential diameter over slide: 160 mm | Spindle bore: 36 mm | Pinolenkegel: MK 3 | Collet device: up to 27 diameters | Speed: 42-2000 U / min | Dimensions: 1750x500x1200 mm | Weight: 750 kg » more

new | Swing over bed: 320 mm | Swing over support: 200 mm | Turning length: 900 mm | Swing in the crank: mm | Speed: 75 - 2000 rpm | Center height: 160 mm | Spindle bore: 50 mm | Tailstock MK 3 MK | Supply voltage: 230 V | Total power requirement: 1,5 kW | Machine weight approx .: 0.29 t | Space ... » more

used | Swing over bed: 440 mm | Turning diameter over slide: 250 mm | Turning length: 1000 mm | Spindle bore: 62 mm | Spindle speed:: 124 - 1400 | Tailstock MK: 4 | Quill stroke: 160 mm | Thread cutting metric: 0.5 - 112 mm/rev | Thread - inch: 1/4 - 56 inch. | Total power requirement: 7.5 kW | ... » more

used, Sehr gut erhalten , Very good Condition | Make Colchester | Type Master 3250 | Year 1997 | Lehrwerkstatt drehmaschine Colchester Master 3250 | Centre height (mm) Swing bed = 350 | Center distance (mm) Swing gap = 535 | Spindle bore DBC = 650 | Bore = 42 mm | Speeds vario 3250 | Digital read out | * V Constante * Collet device * Multi ... » more

new | Diameter: 330 mm | Turning length: 1000 mm | Swing over the cross slide: 198 mm | Swing in the crank: 476 mm | Spindle bore: 36 mm | Threading metric: 0,4 - 3 mm | Threading WHITWORTH: 56-4 TPI | Tailstock travel: 95 mm | Planschlittenweg: 160 mm | Number of spindle speeds: 70 - 2000 (8) U / ... » more

used | Swing over bed: 410 mm | Swing over support: 210 mm | Turning length: 1500 mm | Swing in the crank: mm | Speed: 11-2240 U / min | Center height: 205 mm | Spindle bore: 80 mm | Total power requirement: 7.5 kW | Machine weight approx .: 2,1 t | Space required approx.: 3.3 x 1.4 x 1.8 m » more

used | Turning length: 800 mm | Circumference diameter over bed: 297 mm | Circumferential diameter over slide: 160 mm | Spindle bore: 36 mm | Pinolenkegel: MK 3 | Collet device: up to 27 diameters | Speed: 42-2000 U / min | Dimensions: 1750x500x1200 mm | Weight: 750 kg » more

used | Diameter above the bed: 360 mm | Turning diameter over slide: 190 mm | Tip width: 850 mm | Rotating diameter in cranking: 540 mm | Speed: 50 - 2000 rpm / min | Spindle passage: 53 mm | Total power requirement: 4.0 kVA | Machine weight approx: 1,2 t | Space requirement approx.: 2.3 x 1.4 x 1.6 ... » more

used | Turning diameter over bed: 500 mm | Swing over support: 320 mm | Turning length: 1000 mm | Center height: 250 mm | Distance between centers: 1000 mm | Spindle bore: 56 mm | Spindle speeds: 14 to 2240 U / min | Spindle nose: DIN 55027 Gr. 6 | Feeds - longitudinal: 0.023 - 4.8 mm/rev | Feeds - ... » more

used, good | Center height 170 mm | Distance between centers 800 mm | Turning diameter over bed 350 mm | Spindle bore 46 mm | 18 spindle speeds 31.5 - 2,500 rpm | Machine weight 1.2 t » more

new, very well | Three-axis digital display make Fagor, model 40 iTS with v constant | Turning diameter over bed 650 mm | Turning diameter over support 450 mm | Turning length 1,435 mm | Spindle bore 155 mm | Spindle speed, three-stage - infinitely variable 50 - 800 rpm | Tailstock quill stroke / tailstock ... » more

used | Turning length: 750 mm | Diameter: 310 mm | Swing over support: 175 mm | Spindle Bore: 32.0mm | Tailstock MK 3 MK | Speed: 85 - 2200 rpm | Bed width: 200 mm | Total power requirement: 2,2 kW | Machine weight approx .: 710 kg | Dimensions L-W-H: 1884 x 717 x 1262 mm » more

new | Rotating diameter over bed: 660 mm | Swing over support: 420 mm | Turning length: 1500 mm | Rotating diameter in cranking: 840 mm | Speed: 36 - 1600 rev / min | Center height: 330 mm | Spindle bore: 103 mm | Tailstock MK 5 MK | Tailstock: 150 mm | Tailstock: 75 mm | Total power requirement: ... » more

new | Turning diameter over bed: 1090 mm | Swing over support: 690 mm | Turning length: 3000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread ... » more

new | Swing over bed: 250 mm | Swing over support: 130 mm | Turning length: 700 mm | Speed: 115 - 1620 U / min | Center height: 125 mm | Spindle bore: 27 mm | Tailstock MK: 2 | Tailstock quill stroke: 40 mm | Metric threads 0.2 - 3.5 mm | Thread - Customs: 8-56 inches. | Thread - module 0.2 - 12.5 ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4461 | MAKE Potisje ADA | TYPE PA 45 DC | YEAR 1989 | SPECIFICATIONS | Swing over bed Ø 910 mm | Swing over cross slide 600 mm | Swing in the gap Ø 1200 mm | Distance between centres 4000 mm | Work piece weight 5000 kg | Spindle bore ... » more

new | Turning diameter over bed: 1090 mm | Swing over support: 690 mm | Turning length: 5000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread ... » more

used, very good condition | Tip height: 123 mm | Center width: 560 mm | Circulation Ø: over bed 280 mm | Spindle bore: 27mm | Spindle speeds: 60 - 1250 rpm | Feeds: longitudinal/planar 0.091-2.553/0.046-1.292 mm/rev | Thread pitch: 0.25 - 11 mm | electrical connection: 380 V, 0.75 kW | Space requirement: 1300 x 700 x ... » more

used, good | inventory Number : 6681 | Type: SUS 63/5000 | Producer: TOS | Generated: | parameters: | Maximum turning length: 5000 mm | Maximum turning diameter over bed: 655 mm | Maximum turning diameter over support: 390 mm | Spindle diameter: 82 mm | Furnishing: | chuck | grasshopper | digital ... » more

used | Swing over bed: 330 mm | Turning diameter over slide: 190 mm | Distance between centers: 650 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m | Turning length: mm » more

used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Swing over bed Ø 820 mm | Swing over cross slide 515 mm | Distance between centres 3000 mm | Work piece weight 1200 kg | Spindle bore 128 mm | Spindle speeds / ranges 1400 Rpm | Bed width 560 mm | Power 30 Kw | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition | Make VDF DUE 560 | Type DUE 560 x 3000 | Year 1983 | LUZ Drehmaschine | Centre height (mm) Swing = 570 | Center distance (mm) DBC = 3.000 | Spindle bore Bore = 62 | digital readout | steady rest | www.mach4metal.com » more

new | Turning diameter over bed: 1320 mm | Swing over support: 940 mm | Turning length: 5000 (1500 to 6000) mm | Spindle bore: 155 mm | Swing in the crank: 1500 mm | Spindle speeds: 5 - 1000 U / min | Metric threads: 0.5 - 480 mm | Thread: 80 steps | Thread - module 0.125 - 120 mm | Thread - inch: ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5586 | MAKE Colchester | TYPE MAGNUM 1250 | YOP 1991 | SPECIFICATIONS | Swing over bed Ø 630 mm | Swing over cross slide Ø 390 mm | Swing in the gap Ø 900 mm | Gap length 300 mm | Spindle bore 116 mm | Bed width 480 ... » more

used | Turning diameter over bed: 1440 mm | Turning diameter over support: 1070 mm | Turning length: 4000 mm | Swing in the crank: 1800 mm | Length of crank: 530 mm | Spindle bore: 149 mm | Spindle speeds: 2.8 - 710 rpm | Feeds - longitudinal: 0.1 - 6 mm/rev | Feeds - plane: 0.05 - 3 mm/rev | Thread ... » more

used, Sehr gut erhalten , Top Condition | COLCHESTER - MASTER 2500 | Universal lathe Ø 335 x 1000 mm | MACH - ID 6362 | Make: COLCHESTER | Type: MASTER 2500 | YOP: 1989 | Swing over bed Ø 335 mm | Swing over cross slide Ø 210 mm | DBC Turning Length 1.000 mm | Spindle bore 40 mm | Spindle power 3 kW | Bed width 230 ... » more

new | Diameter: 360 mm | Turning length: 1000 mm | Swing over the cross slide: 220 mm | Spindle bore: 38 mm | Threading metric: 0,4 - 7 mm | Threading WHITWORTH: 4-56 TPI | Tailstock: 110 mm | Planschlittenweg: 170 mm | Top slide adjustment: 165 mm | Longitudinal feeds :: 0.067 to 1.485 mm | Feeds: ... » more

used | Swing over bed: 520 mm | Swing over support: 300 mm | Turning length: 1000 mm | Swing in the crank: mm | Speed: 45 - 2000 rpm | Center height: 260 mm | Spindle bore: 50 mm | Total power requirement: 8.0 kW | Machine weight approx: 3,5 t | Space required: 3.0 x 1.5 x 1.8 m » more

used | Diameter above the bed: 460 mm | Swing over support: 270 mm | Distance between centers: 2000 mm | Turning length: mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

new | Diameter: 440 mm | Turning length: 1500 mm | Circumference diameter over bed sled: 210 mm | Circumference diameter in the bed bridge: 620 mm | Center height: 210 mm | Speed(s): 21 (20 - 2000) rpm | Tailstock: MK5 | Quill stroke: 180 mm | Quill diameter: 70 mm | Spindle mount: DIN 55027 No. 8 ... » more

used | Diameter: 580 mm | Turning length: 1500 mm | Swing over bed slide: mm | Spindle speeds: 28 - 2800 rpm | Spindle bore: 28 mm | Quill stroke: 220 mm | Machine's weight about: 3500 kg » more

used, Sehr gut erhalten , Top Condition | MACH-id 4172 | MAKE VDF Boehringer | TYPE DUE 800 | YEAR 1985 | SPECIFICATIONS | Swing over bed Ø 820 mm | Swing over cross slide 610 mm | Distance between centres 2000 mm | Work piece weight 3000 kg | Spindle bore 128 mm | Spindle speeds / ranges 1400 ... » more

new, new | Made in Italy | Center height: 300 mm | Turning diameter over bed: 600 mm | Turning diameter over slide: 380 mm | Tip width: 1,500 mm | Bed width: 400 mm | Spindle bore: 82 mm | Spindle nose: Camlock 8 " | Spindle speeds: (12) 16 - 1200 rpm | Motor power: 9,2 kW (special equipment / standard: ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5426 | MAKE VDF Boehringer | TYPE DUS 630 Ti | YOP 2003 | SPECIFICATIONS | Max. turning Ø 640 mm | Spindle bore 62 mm | Speedrange 2500 Rpm | Spindle power 25 kW | Control SIEMENS 810D | DIMENSIONS | Length ... » more

used, Sehr gut erhalten, Very good Condition | Make Mexpol TUB | Type TUB 1300 | Year 2007 | conventionel turning lathe | Centre height (mm) Swing = 1300 | Center distance (mm) DBC = 5250 | Spindle bore Bore = 152 | 4 chuck 1.000 mm | Steady's up to 950 mm | Digital read out | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | Technische Daten | Drehdurchmesser über Bett Ø 1100 mm | Durchmesser über Bettschlitten 790 mm | Drehdurchmesser in der Grube Ø 1270 mm | Drehlänge 1500 mm | Spindelbohrung 105 mm | Drehzahlbereich / stufen 6 - 800 Rpm | Bettbreite 550 mm | Antriebsleistung 11 Kw | ABMESSUNGEN | ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5193 | MAKE TOS Celakovice CZ | TYPE SU 125 H | YOP 2004 | SPECIFICATIONS | Swing over bed Ø 1250 mm | Swing over cross slide 940 mm | DBC Turning length 20.000 mm | Spindle bore 128 mm | Bed width 800 mm | ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 500mm | Swing over cross slide Ø:270mm | Swing in the gap Ø: 700mm | DBC Turning Length: 1500mm | Gap length: 230mm | Spindle bore: 52mm | Spindle power: 5,5kW | Tailstock spindle Ø: 70Ø | Stroke pinole: 180mm ... » more

used, Sehr gut erhalten , Top Condition | 2 axis digital readout | 3 chuck 630 mm | 4 chuck 800 mm | Rapid feed all directions | 3 x Steady rest | DBC Turning Length: 3000mm | Swing over bed Ø: 930mm | Swing over cross slide Ø:620mm | Spindle bore: 95mm | Spindle power: 22kW | Bed width: ... » more

used, Very good | machine data | Year of construction: approx. 1991 | L x W x H: approx. 2700x1200x1800mm | Weight: approx. 1600 kg | ** Machine is in very good used condition ** | ** Delivery time on request ** | ** Machine partially overhauled ** | Technical specifications | Digital display: 3-axis digital ... » more

used | Diameter above the bed: 1000 mm | Swing over support: 720 mm | Turning length: 1100 mm | Swing in the crank: 1400 mm | Speed: 45 - 900 rpm | Center height: 500 mm | Spindle bore: 82 mm | Total power requirement: 15 kW | Machine weight approx .: 7,8 t | Space required: 3.5 x 1.7 x 1.7 m » more

used | Turning diameter over bed: 635 mm | Swing over support: 390 mm | Turning length: 2000 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

used, good | Center width 3,000 mm | Center height 500 mm | Face plate diameter 800 mm | Bed length 4,000 mm | Three-jaw chuck, diameter 500 mm | Spindle speed range 4 – 800 rpm » more

used, good | WEILER PRAKTIKANT 160 incl. 3-axis digital / Heidenhain | Machine comes from an educational institution | -Turning diameter over bed 320mm | -Top height 160mm | -Turning diameter over support 200mm | -Rod passage 40mm | -Turning length 650mm | -Speed range 25-2500 rpm | -Spindle nose A2-5 | ... » more

used | Turning length: 1000 mm | Swing over bed: 430 mm | Turning diameter over support: 235 mm | Spindle speeds: 11.2 - 2000 rpm | Spindle bore: 56.0 mm | Morse Taper 4 MK | Quill stroke: 135 mm | Bed width: 333 mm | Spindle holder: DIN 55022 size. 6 | Total power requirement: 7.75 kW | Machine ... » more

used | Distance between centers: 1000 mm | Spindle speed: 25 - 2000 rpm. | Swing over bed: 380 mm | Swing over cross slide: 190 mm | Spindle bore: 56 mm | Pinolenkegel: MK 4 » more

used | Swing over bed: 410 mm | Swing over support: 240 mm | Turning length: 1000 mm | Center height: 205 mm | Distance between centers: 1000 mm | Spindle bore: 47 mm | Turning speed: 28 - 1250 rpm / min | Feeds - longitudinal: 0.03 - 8.8 mm/rev | Feeds - plan: 0.006 - 1.84 mm/rev | Thread - mm ... » more

used | Turning length: 1000 mm | Rotating diameter over bed: 356 mm | Turning diameter over support: 220 mm | Swing in the crank: 506 mm | Length: 0 mm | Spindle speed: 30 - 3000 rpm. | Spindle bore: 38.0 mm | Tailstock quill holder MT: MT 3 | Quill stroke: 115 mm | Bed width: 206 mm | Adjustment: ... » more

used | Diameter above the bed: 1000 mm | Swing over support: 760 mm | Center height: 500 mm | Turning length: 5100 mm | Speed range: 3.55 - 710 rpm | Bar capacity: 82 mm | Tailstock MK: 6 | Spindle head: DIN 55022 Gr. 11 | Planschlittenweg: 480 mm | Top slide: 250 | Feed - along: 0.063 to 140 mm / ... » more

used | SN 373-08 | Heidenhain digital display » more

new, new | MCM Series T: | Center height: 180 - 255 mm | Tip width: 1000 - 1500 mm | Bed width: 290 mm | Spindle bore: 52 mm | Spindle speeds: 60 - 2000 rpm, 6 levels, stepless | Drive power 4 - 5.5 kW (Optional 5.5 - 7.5 kW) | Weight: 1800 - 2500 kg | Extensive standard equipment, for example: | - ... » more

new | Diameter above the bed: 460 mm | Swing over support: 274 mm | Turning length: 2000 mm | Spindle bore: 58 mm | Turning speed: 25 - 2000 rev / min | Swing in the crank: 690 mm | Metric threads: 41 / 0.1 to 14 mm | Thread - inch 60/2 - 112 inches. | Thread - Module: 34 / 0.1 - 7 mm | Whitworth ... » more

used, Sehr gut erhalten, Very good Condition | Make Cut to lentgh 2 mm | Type KSA 1500 x 2.0 | Year 90 er | Slitting / Cutting / Straightning Längs Querteil | 9 rolls 15 + 15 mm | Adjustable knives slitting | NC Controlled machine | Slitting 1500 x 2 mm Cutting 1500 x 2 mm Längs- und Querteilanlagen | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MACH-id 5467 | MAKE VDF Boehringer | TYPE DUS 400 Ti | YOP 2011 | SPECIFICATIONS | Max. turning Ø 420 mm | Spindle bore 51 mm | Speedrange 3000 Rpm | Spindle power 11 kW | Control SIEMENS 840 DSL SHOPTURN | Chip conveyor Yes ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5303 | MAKE Weiler | TYPE E 110 x 3000 | YOP 1996 | SPECIFICATIONS | Max. turning Ø 1100 mm | Spindle bore 128 mm | Speedrange 1120 Rpm | Spindle power 37 kW | Control SIEMENS 840 | Chip conveyor Yes | Pinole taper ... » more

used, Sehr gut erhalten, Very good Condition, Beautiful machine | Make VDF DUE 560 | Type DUE 560 | Year 1982 | Conventionel lathe LUZ drehmaschine | Centre height (mm) Swing = 570 | Center distance (mm) DBC = 1.000 | Spindle bore Bore = 66 | HeidenHain dro | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MACH-id 5192 | MAKE TOS Celakovice CZ | TYPE SU 100 H | YOP 2004 | SPECIFICATIONS | Swing over bed Ø 1050 mm | Swing over cross slide 730 mm | DBC Turning length 10.000 mm | Spindle bore 122 mm | Bed width 800 mm | Stroke pinole 200 mm | ... » more

new | Swing over bed: 440 mm | Swing over support: 230 mm | Turning length: 1500mm(or 1000, 2000mm) mm | Spindle bore: 62 mm | Rotating diameter in cranking: 620 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi ... » more

new, new | Stepless toolmaker lathe TC 250 V | Center height: 250 mm | Circumferential diameter over slide: 350 mm | Swing diameter i.d. Offset: 695 mm | Distance between centers: 1500 mm | Spindle nose: DIN 55029, Camlock, Gr. 6th | Bed width: 305 mm | Cross slide travel: 272 mm | Upper slide travel: ... » more

used, good | Offer 24086 | Technical data approx.: | - max. turning diameter over bed Ø 650 mm | - via cross slide Ø 550 mm | - Peak height above bed 350 mm | - Center width 2500 mm | - Spindle bore 60 mm | - Spindle speeds 7.8 - 400 rpm | - Feeds lengthwise/flat | - Tailstock | - Quick-change tool holder ... » more

used, very good condition | Center height: 285 mm | Distance between centers: 1500 mm | Circumferential Ø: over bed 580 mm | Spindle bore: 72 mm | Spindle mount: Gr. 8th | Mounting cone tailstock: 5 MK | Spindle speeds: 20 - 2000 rpm | Feeds: longitudinal / flat 0.05-16.32 / 0.025-8.16 mm / rev | Thread pitches: 0.5 - ... » more

used | Swing over bed: 400 mm | Turning diameter over support: 220 mm | Turning length: 1000 mm | Swing in the crank: mm | Speed: 31.5 - 1400 rpm | Center height: 205 mm | Spindle bore: 50 mm | Total power requirement: 5.0 kW | Machine weight approx .: 1,4 t | Space requirements approx .: 2.5 x 1.2 ... » more

used | Turning length: 1000 mm | Swing over bed: 420 mm | Turning diameter over slide: 250 mm | Swing in the crank: 580 mm | Spindle speed: 45 - 1800 rpm. | Spindle bore: 52.0 mm | Tailstock MK: 4 | Quill stroke: 120 mm | Bed width: 225mm | Spindle holder: DIN 55029, D1-6 | Longitudinal feeds: 0.05 ... » more

used, good | NARDINI - AM 400 A incl. 2-axis/digital display | -Turning diameter over bed 850mm | -Turning diameter over support 500mm | -Spindle bore 120mm | -Turning length 1000mm | -Three-jaw chuck - ROTAS 500 | D7tarmg | -Lynette | -5x multi-fix inserts | -Lidding protection | Dimensions: | LxWxH ... » more

new | Diameter: 440 mm | Turning length: 1000 mm | Circumference diameter over bed sled: 210 mm | Circumference diameter in the bed bridge: 620 mm | Center height: 210 mm | Speed(s): 21 (20 - 2000) rpm | Tailstock: MK5 | Quill stroke: 180 mm | Quill diameter: 70 mm | Spindle mount: DIN 55027 No. 8 ... » more

used | Swing over bed: 520 mm | Swing over support: 270 mm | Distance between centers: 1500 mm | Swing in the crank: 780 mm | Speed: 14 - 1800 rpm | Spindle passage: 62 mm | Total power requirement: 11.0 kVA | Machine weight approx: 3,1 t | Space requirement approx.: 3.5 x 1.2 x 1.4 m » more

used | Rotating diameter over bed: 356 mm | Swing over support: 225 mm | Turning length: 980 mm | Center height: 180 mm | Bed width: 187 mm | Speeds: 8: 70 - 2000 rpm | Quill stroke: 120 mm | Total power requirement: 1,5 kW | Quill diameter: 42 mm | Spindle bore: 52 mm | Feeds - longitudinal: 32: ... » more

used | Diameter above the bed: 650 mm | Rotation diameter over support: 440 mm | Turning length: 7000 mm | Center height: 330 mm | Center distance: 7000 mm | Spindle bore: 61 mmø | Spindle speeds: 8 - 800 rpm | Total power requirement: kW | Machine weight approx .: 5,9 t | Dimensions of the machine ... » more

used | Diameter above the bed: 360 mm | Turning diameter over slide: 190 mm | Turning length: 1000 mm | Center height: 180 mm | Rotating diameter in cranking: 540 mm | Offset length: 320 mm | Spindle bore: 46 mm | Spindle holder: DIN 55027/Gr. 6 | Spindle speeds: 12, 25-1600 rpm | Number of feeds: ... » more

used | Turning diameter: 410 mm | Turning length: 1000 mm | Swing diameter over bed slide: 245 mm | Speed: 22 - 1000 rpm | Spindle bore: 41 mm | Quill stroke: 130 mm | Tailstock MK: 4 | Total power requirement: 3.5 kW | Machine weight approx.: 1525 kg | Space requirement approx.: 2700 x 1100 x 1250 ... » more

used | Swing over bed: 520 mm | Swing over support: 300 mm | Turning length: 1000 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m » more

used | Turning length: 750 mm | Diameter: 310 mm | Swing over support: 175 mm | Spindle Bore: 32.0mm | Tailstock MK 3 MK | Speed: 85 - 2200 rpm | Bed width: 200 mm | Spindle mount: DIN 55027 GR 5 | Total power requirement: 2,2 kW | Machine weight approx .: 710 kg | Dimensions L-W-H: 1884 x 717 x ... » more

used, used | Center height: 315 mm | Distance between centers: 1000 mm | Circulation Ø: 630 mm | Spindle bore: 74mm | Spindle mount: Gr. 8th | Taper tailstock: 5 MK | Spindle speeds: 7 - 710 rpm | Feeds: longitudinal/transverse 0.063-4/0.030-2 mm/rev | Thread pitches: 1 - 14 mm | electrical connection: ... » more

used, good (used) | WEILER COMMODOR / 3-axle Heidenhain | Turning diameter over bed 380mm | Turning diameter over support 190mm | Turning length 1000mm | Bar capacity 56mm | Spindle speed 25 - 2000 rpm | Spindle nose A2 - 6 | Automobile. Longitudinal/cross feeds 0.026-1.253mm/rev | Thread / Metric /Inch | Drive ... » more

used, good (used) | WEILER COMMODOR 230 2-axis Heidenhain digital display | GS identifier | Center height 230mm | Center distance 1000mm | Turning diameter over bed 475mm | Circumference diameter over facing slide 270mm | Bar capacity 56mm | Cjr8l82mnl | Speed range 25-2000rpm | Automatic longitudinal/cross ... » more

new | Turning length: 3000 mm | Turning diameter: 800 mm | Turning diameter in the crank: 1000 mm | Swing over support: 540 mm | Speed: 25 - 1600 rpm | Pinole :: 5 MK | Pinolenweg: 235 mm | Spindle bore: 105.0 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | Machine weight approx.: 3820 ... » more

new | Swing over bed: 320 mm | Swing over support: 200 mm | Turning length: 900 mm | Turning diameter in the offset: 320 mm | Speed: 75 - 2000 rpm | Center height: 160 mm | Spindle bore: 38 mm | Tailstock MK: 3 | Supply voltage: 400 V | Total power requirement: 1,5 kW | Machine weight approx .: 0.4 ... » more

used | Rotating diameter over bed: 300 mm | Swing over support: 150 mm | Turning length: 800 mm | Spindle bore: 35 mm | Speed range: 42 - 2000 rpm | Feeds: 0.011 - 0.91 mm/rev | Tailstock MK: 3 | Total power requirement: 2,2 kW | Machine weight approx .: 0.75 t | Space requirement approx.: 1.7 x 0.8 ... » more

new | Diameter above the bed: 360 mm | Turning diameter over support: 220 mm | Turning length: 1000 mm | Swing in the crank: 506 mm | Speed: 45 - 1800 r / min | Center height: 180 mm | Spindle bore: 38 mm | Tailstock MK: 3 | Total power requirement: 2.4 kW | Machine weight approx .: 0,9 t | ... » more

new | Swing over bed: 470 mm | Swing over support: 300 mm | Turning length: 1000 mm | Spindle bore: 58 mm | Speed: 20-2000 U / min | Total power requirement: 5.5 kW | Machine weight approx .: 1800 tons | Space requirement approx.: 1.95x0.9x1.4 m » more

new | Swing over bed: 330 mm | Swing over support: 210 mm | Turning length: 635 mm | Turning diameter in the crank: 480 mm | Speed: 58 - 2500 rpm | Center height: 167 mm | Spindle bore: 40 mm | Tailstock MK 3 MK | Total power requirement: 2,2 kW | Machine weight approx .: 0.8 t » more

new | Swing over bed: 420 mm | Turning diameter over slide: 250 mm | Turning length: 1000 mm | Swing in the crank: 580 mm | Speed: 45 - 1800 r / min | Center height: 210 mm | Spindle bore: 52 mm | Tailstock MK: 4 | Total power requirement: 4,4 kW | Machine's weight about 1.6 tonnes | Dimensions ... » more

new | Turning length: 1000 mm | Turning diameter: 410 mm | Circumference diameter over bed slide: 255 mm | Swing in the crank: 580 mm | Spindle bore: 52.0 mm | Speed: 30 - 3000 rpm | Bed width: 250 mm | Spindle mount: 55029 D 1-6 | Tailstock taper: MK 4 | Spindle stroke: 120 mm | Total power ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4207 | MAKE VDF Boehringer | TYPE DUE 500 | YEAR 2004 | SPECIFICATIONS | Swing over bed Ø 520 mm | Swing over cross slide 315 mm | Distance between centres 1000 mm | Work piece weight 1500 kg | Spindle bore 62 mm | Spindle speeds / ranges 2240 Rpm | Bed ... » more

used, Sehr gut erhalten , Top Condition | MAKE Gurutzpe | TYPE SUPER - AT 500 | YEAR 1981 | SPECIFICATIONS | Swing over bed Ø 1000 mm | Control Conventionel | Swing over cross slide 700 mm | Distance between centres 8000 mm | Work piece weight 5500 kg | Spindle bore 140 mm | Spindle speeds / ranges 500 Rpm | ... » more

used, Sehr gut erhalten | Make VDF DUE 1000 | Type DUE 800 / 1000 | Year 1988 | LUZ Drehmaschine | Centre height (mm) Swing bed = 1.010 | Center distance (mm) Swing sup = 710 | Spindle bore DBC = 3.000 | Bore = 128 | 3 Axis Digital readout | Steady rest | * DUE with 500 centre height !!! * Feeds in 3 directions * ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 1.300mm | Swing over cross slide Ø:1.000mm | Swing in the gap Ø: 1.600mm | DBC Turning Length: 6.500mm | Gap length: 400mm | Spindle bore: 140mm | Spindle power: 28.5kW | Bed width: 650mm | Tailstock spindle Ø: ... » more

used, Sehr gut erhalten, Very good Condition | Make Traub TNA 480 | Type TNA 480 | Year New 1992 | Traub TX 8 D | Centre height (mm) Swing bed = 660 | Center distance (mm) DBC = 1.000 | Spindle bore Bore = 80 | ATC 14 positions | Speeds 3150 Rpm | SMW 315 chuck | * Big tooling package * Chip conveyor | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition | Make Wisconson / Graziano | Type Wismatic LMC 350 / 1500 | Year 2002 | Universal turning lathe | Centre height (mm) Swing = 350 mm | Center distance (mm) DBC = 1.500 mm | Spindle bore Bore = 76 mm | Feeds / Rapid | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MACH-id 5394 | MAKE Weiler Germany | TYPE COMMODOR 40 | YOP 1981 | SPECIFICATIONS | Swing over bed Ø 380 mm | Swing over cross slide Ø 190 mm | Spindle bore 58 mm | Spindle power 4 kW | Stroke pinole 150 mm | Spindle taper 4 Mk | ... » more

used | Diameter above the bed: 1000 mm | Swing over support: 760 mm | Turning length: 5100 mm | Center height: 500 mm | Planschlittenweg: 480 mm | Oberschlittenweg: 250 mm | Spindle bore: 82 mm | Spindle head: DIN 55022 Gr. 11 | Spindle speeds: 3.55 - 710 rpm | Feed - along: 0.063 to 140 mm / rev | ... » more

used, Sehr gut erhalten , Top Condition | VDF BOEHRINGER - DUE 500 | Universal turning lathe Ø 520 x 1000 mm | MACH - ID 6220 | Make: VDF BOEHRINGER | Type: DUE 500 | YOP: 2004 | Hours: 8000 | Swing over bed Ø 520 mm | Swing over cross slide Ø 315 mm | DBC Turning Length 1.000 mm | Spindle bore 62 mm | Spindle power 11 ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 3544 | FABRIKAT VDF Boehringer | TYP DUE 800 / 3000 | BAUJAHR 1982 | Technische Daten | Drehdurchmesser über Bett Ø 820 mm | Durchmesser über Bettschlitten 515 mm | Drehlänge 3000 mm | Werkstückgewicht 1200 kg | Spindelbohrung 128 mm | Drehzahlbereich / stufen 1400 Rpm | ... » more

used, Sehr gut erhalten , Top Condition | MAKE WFL | TYPE M 100 x 5000 | YEAR 1997 | SPECIFICATIONS | Swing over bed Ø 950 mm | Swing over cross slide 850 mm | Distance between centres 5000 mm | Spindle bore 165 mm | Power 145 Kw | DIMENSIONS | Length 14.500 mm | Width 4.500 mm | Height 3.800 mm | - ... » more

used, Sehr gut erhalten , Top Condition | MAKE Merli Clovis | TYPE Clovis 70 | YEAR 80 er | SPECIFICATIONS | Swing over bed Ø 1450 mm | Control Conventionel | Swing over cross slide 970 mm | Distance between centres 12000 mm | Work piece weight 25000 kg | Spindle bore 206 mm | Spindle speeds / ranges 3 - 300 ... » more

used | Swing over bed: 590 mm | Swing over support: 350 mm | Turning length: 2000 mm | Center height: 280 mm | Bed width: 490 mm | Spindle bore: 81 mm | Spindle speeds: 18, of 19-950 U / min | Total power requirement: 11 kW | Machine weight approx .: 4,8 t | Dimensions approx .: 4.51 x 1.76 x 1.58 m ... » more

used, Very good | Machine data: | Year of construction: approx. 1989 | L x W x H: approx. 2700x1200x1800mm | Weight: approx. 1800 kg | Very good general condition | Technical specifications | Digital display: 3-axis digital display | Dimensions: | Max. turning diameter over support: approx. Ø 180 mm | Max. ... » more

used, Very good | Machine data: | Year of construction: approx. 1990 | L x W x H: approx. 1700x1000x1700mm | Weight: approx. 650 kg | ** Machine is in very good used condition ** | ** Delivery time subject to prior sale upon request ** | ** Machine partially overhauled ** | Specifications: | Digital display: 3 ... » more

used, good | WEILER COMMODOR 230 AC / with CE marking / 3-axis digital display | Gxadgeq | -Year of construction 1999 | -Top height 230mm | -Center width 1000mm | -Turning diameter over bed 475mm | -Circulation diameter over face slide 270mm | -Rod passage 56mm | -Speed range 25-2000rpm (infinitely ... » more

used | Distance between centers: 4500 mm | Swing diameter over bed: 1100 mm | Swing diameter over slide: 730 mm | Speed: 1-1120 rpm | Spindle bore: 128 mm | Rapid traverse: 7/3.5 m/min | Tailstock seat MT: 6 | Weight: 11500kg » more

new | Condition: New | Country of origin: Bulgaria | Price: 46190 € | Leasing rate: 933.04 € | Turning diameter over bed: 500 mm | Distance between centers: 1500 mm | Center height: 250 mm | Spindle bore: 75 mm | Turning diameter over cross slide: 300 mm | Bed width: 400 mm | Spindle mount / ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 70960 € | Lease rate: 1419.2 € | Diameter above the bed: 860 mm | Distance between centers: 1500 mm | Center height: 430 mm | Spindle bore: 135 mm | Turning diameter over cross slide: 620 mm | Bed width: 560 mm | Spindle mount / DIN55027: ... » more

new | Diameter: 330 mm | Turning length: 830 mm | Circumference diameter over bed slide: 196 mm | Swing diameter in the bed bridge: 170 | Center height: 165 mm | Distance between centers: 830 mm | Turning length in the bed bridge: 430 | Speed(s): 16 (70-2000) rpm | Tailstock MK 3 | Quill stroke: ... » more

used, Good | Center height: 160 mm | Distance between centers: 880 mm | Spindle bore: 48 | Bed width: 312mm | Speeds: (12) 45 - 2000 rpm | Motor power: 5.5 kW | Tailstock mount: MK 4 | Quill stroke: 140 mm | Weight, approx.: 1500 kg | Dimensions (WxDxH), approx.: 2250 x 1030 x 1650 mm | Furnishing: | - 3 ... » more

new | Turning length: 3000 mm | Diameter: 660 mm | Turning diameter in the crank: 870 mm | Swing over support: 420 mm | Speed: 36 - 1600 rev / min | Pinole :: 5 MK | Pinolenweg: 150 mm | Spindle bore: 105.0 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | Machine weight approx.: 3990 kg. ... » more

used | Center height: 165 mm | Distance between centers: 750 mm | Spindle bore: 40 mm | Tailstock taper MK: 3 | Dimensions L-W-H: 2000x800x1250 mm | Weight of the machine ca .: 1150 kg » more

used, ready for use | Center height: 250 mm | Center width: approx. 1740 mm | Circulation Ø: over bed 500 mm | Spindle bore: 63 mm | Spindle holder: size. 6 | Mounting cone tailstock: 5 MK | Spindle speeds: 170 - 2240 rpm | Feeds: longitudinal/planar 0.014-1/0.0063-0.45 mm/rev | Thread pitch: 0.1 - 112 mm | ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 5000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Turning diameter over bed: 325 mm | Turning diameter over slide: 190 mm | Turning length: 750 (500 or 1000) mm | Spindle bore: 32 mm | Swing diameter in the crimp: 440 mm | Spindle speeds: (12) 85 - 2000 rpm | Metric threads: (48) 0.1-28mm | Thread - Inches: (53) 75-2.5 inches. | Thread ... » more

new | Diameter above the bed: 460 mm | Turning diameter over support: 290 mm | Turning length: 1000 mm | Swing in the crank: 700 mm | Speed: 25 - 1800 r / min | Center height: 230 mm | Spindle bore: 80 mm | Tailstock MK 5 MK | Total power requirement: 5.5 kW | Machine weight approx .: 2.35 t | ... » more

new, new | MCM TC series: | Top height: 225 - 350 mm | Tip width: 1000 - 5000 mm | Bed width: 400 mm | Spindle bore: 82/105 mm | Spindle speeds (24) 9 - 1600 or (12) 16 - 1200 rpm | Drive power 5.5 - 9.2 kW (option: 7.5 - 11 kW) | Weight: 2600 - 6100 mm | Extensive standard equipment, e.g. | - 3-axis ... » more

new | Turning length: 1000 mm | Turning diameter: 400 mm | Swing in the crank: 560 mm | Spindle bore: 52.0 mm | Speed: 45 - 2,000 r / min | Bed width: 210 mm | Spindle mount: 55029 D 1-5 | Tailstock taper: MK 4 | Spindle stroke: 100 mm | Total power requirement: 2.0 / 2.4 kW | Machine weight approx ... » more

used, Sehr gut erhalten , Top Condition | FABRIKAT Cazeneuve France | TYP HB 575 | BAUJAHR 80 er | Technische Daten | Drehdurchmesser über Bett Ø 575 mm | Steuerungsart Conventionel | Durchmesser über Bettschlitten 300 mm | Drehlänge 1500 mm | Werkstückgewicht 1000 kg | Spindelbohrung 51 mm | ... » more

new | Diameter above the bed: 360 mm | Turning diameter over support: 220 mm | Turning length: 760 mm | Turning diameter in the crank: 515 mm | Operating voltage: 400 V | Spindle bore: 38 mm | Spindle speeds - stepless: 30-405 / 165-2200 rpm | Number of feeds: 40 | Longitudinal feeds :: 0,067 - ... » more

used, Sehr gut erhalten , Top Condition | MAKE Skoda | TYPE SIU 250 | YEAR 1979 / 2003 | SPECIFICATIONS | Swing over bed Ø 2500 mm | Control Bosch | Swing over cross slide 2000 mm | Distance between centres 10000 mm | Work piece weight 100.000 with steady kg | Spindle speeds / ranges 0,32 - 125 Rpm | Bed width ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø 660 mm | Control SIEMENS TOUCH PANEL | Swing over cross slide 370 mm | Distance between centres 3000 mm | Spindle bore 105 mm | Spindle speeds / ranges 2500 Rpm | Bed width 433 mm | Power 15 Kw | DIMENSIONS | Length 4700 mm | Width 2400 mm | Height 2000 ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 1000 to 5000 mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds - stepless: 10 - 1200 rev / min | Metric threads: 0.5 to 120 | Thread - module 0.125 - 30 mm | Thread - inches: inch. | Whitworth thread: ... » more

new | Diameter above the bed: 460 mm | Swing over support: 274 mm | Turning length: 1000/1500/2000 mm | Spindle bore: 58 mm | Turning speed: 25 - 2000 rev / min | Swing in the crank: 690 mm | Metric threads: 41 / 0.1 to 14 mm | Thread - inch 60/2 - 112 inches. | Thread - Module: 34 / 0.1 - 7 mm | ... » more

new | Diameter above the bed: 460 mm | Swing over support: 274 mm | Turning length: 1000/1500/2000 mm | Spindle bore: 58 mm | Turning speed: 25 - 2000 rev / min | Swing in the crank: 690 mm | Metric threads: 41 / 0.1 to 14 mm | Thread - inch 60/2 - 112 inches. | Thread - Module: 34 / 0.1 - 7 mm | ... » more

used | Swing over bed: 720 mm | Swing over support: 500 mm | Turning length: 1000 mm | Spindle speeds: 7.1 - 1800 rpm | Feed - fine adjustment: 6 - 6.28 mm / rev | Horizontal crossbar support feed: 0.005 - 6.28 mm / rev | Spindle motor: 15 kW | Center height: 360 mm | Spindle bore: 82 mm | Total ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 3722 | FABRIKAT Cazeneuve France | TYP HB 725 | BAUJAHR 80 er | Technische Daten | Drehdurchmesser über Bett Ø 725 mm | Durchmesser über Bettschlitten 400 mm | Drehdurchmesser in der Grube Ø 920 mm | Drehlänge 2000 mm | Werkstückgewicht 2000 kg | Spindelbohrung ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 4169 | MAKE Doosan | TYPE MX 2500 ST | YEAR 2005 | DIMENSIONS | Length 5800 mm | Width 2300 mm | Height 2700 mm | b axis milling 10.000 rpm | c axis with 360.000 pos | sub spindle with 5000 rpm | chain atc 40 positions | twin c axis 360.000 | tool ... » more

new | Swing over bed: 410 mm | Swing over support: 255 mm | Turning length: 1000 mm | Swing in the crank: 580 mm | Spindle bore: 52 mm | Spindle speeds: 2n / 30-3000 U / min | Spindle taper: MK6, Camlock D1-6 | Planschlittenweg: 225 mm | Number of feeds: 17 | Longitudinal feeds :: 0.05 to 1.7 mm / ... » more

used, Sehr gut erhalten , Top Condition | COLCHESTER - TRIUMPH 2500 VS | Universal lathe Ø 400 x 1250 mm | MACH - ID 6285 | Make: COLCHESTER | Type: TRIUMPH 2500 VS | YOP: 1995 | Swing over bed Ø 400 mm | Swing over cross slide Ø 246 mm | Swing in the gap Ø 585 mm | DBC Turning Length 1.250 mm | Spindle bore 54 mm | ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1000 to 4000 mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds - stepless: 20 - 2000 rev / min | Metric threads: 0.5 to 120 | Thread - module 0.125 - 30 mm | Thread - inches: inch. | ... » more

used, Sehr gut erhalten , Top Condition | Make VDF DUE 710 | Type DUE 710 | Year 1982 | Universal turning lathe | Centre height (mm) Swing bed = 750 | Center distance (mm) Swing sup = 450 | Spindle bore Bore = 82 | Speeds = 1800 | Feeds 3 directions | DBC = 2.000 mm | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | MAKE Potisje | TYPE PA 65 DC | YEAR 90 er | SPECIFICATIONS | Swing over bed Ø 1300 mm | Control Conventionel 2 axis dri | Swing over cross slide 1000 mm | Swing in the gap Ø 1630 mm | Distance between centres 6000 mm | Work piece weight ca 5000 kg | Spindle bore 140 mm ... » more

used, Sehr gut erhalten | Make Zerbst DP 2000 | Type WMW DP 2000 | Year 70 er | conventionel lathe | Centre height (mm) Swing = 2.400 | Center distance (mm) DBC = 5.000 | Spindle bore Chuck = 1.800 | Load = 10.000 Kg | Saddle = 4.700 mm | Tool post / slide 800 / 600 | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition, Beautiful machine | Make EST Ticino 520 | Type ET BM 520 / 3000 | Year 1991 | est ticino sliding bed lathe universal schiebebett | Centre height (mm) Swing bed = 1.040 | Center distance (mm) Swing gap = 1.780 | Spindle bore DBC = 3.000 / 4.000 | Gap L = 500 | 2 Axis SONY dro | 2 Fixed steady rest | - Optional ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5412 | MAKE STYLE HOLLAND | TYPE 510 x 1350 | YOP 2015 | SPECIFICATIONS | Max. turning Ø 510 mm | Spindle bore 80 mm | Speedrange 2500 Rpm | Spindle power 11 kW | ATC / revolver 8 x VDI-40 | Pinole taper ... » more

used, Sehr gut erhalten, Very good Condition | Make Gurutzpe AT | Type Super AT | Year 80 er | Universal turning lathe | Centre height (mm)Swing = 1.000 | Center distance (mm)DBC = 4.000 | Spindle bore2 axis dro | 2 x steady rest | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition | Make VDF DUE 500 | Type DUE 500 x 2000 | Year 1988 | LUZ Universal turning lathe | Centre height (mm) Swing = 520 | Center distance (mm) DBC = 2.000 | Spindle bore Bore = 77 | 3 axis HeidenHain | 3 directions feeds | 3 chuck 315 + inserts | www.mach4metal.com » more

used, good | Inv. Number: 7159 | Type: BS14 | Producer: TORNOS | Generated: | Parameters: | Max. rod diameter: 14 mm | Number of spindles: 8 pieces | Furnishing: | coolant pump | Counter spindle » more

used | Turning diameter over bed: 500 mm | Turning diameter over support: 285 mm | Turning length: 1500 mm | Workpiece weight between centers max.: 500 kg | Spindle bore: 62 mm | Spindle speeds: (24) 11.2 - 2240 rpm | Feeds - longitudinal: 0.063 - 56 mm/rev | Feeds - plan: 0.0315 - 28 mm/rev | Bed ... » more

used | Turning diameter over bed: 350 mm | Swing over support: 200 mm | Turning length: 800 mm | Spindle bore: 46 mm | Spindle speeds: 18: 25 - 2000 rev / min | Spindle head: Din 55027 size. 5 | Total power requirement: 4.4 / 2.2 kW | Machine weight approx .: 800 kg | Approx. space requirement: 2 x ... » more

new | Turning length: 1500 mm | Diameter: 460 mm | Circular diameter over bed slide: 270 mm | Swing in the crank: 690 mm | Spindle bore: 80.0 mm | Speed: 25 - 1700 rpm | Bed width: 300 mm | Spindle mount: DIN 55029 D 1-8 | Tailstock taper: MK 4 | Pinolenweg: 130 mm | Total power requirement: 5.5 kW ... » more

new | Turning diameter: 325 mm | Turning length: 1000 mm | Circumferential diameter over bed slide: 250 mm | Circumference diameter in the bed bridge: 440 mm | Speed(s): 12 (85-2000) rpm | Tailstock MK 3 | Quill stroke: 100 mm | Quill diameter: 40 mm | Spindle mount: DIN 55027 No. 5 | Spindle bore: ... » more

used | Turning length: 1000 mm | Swing over bed: 380 mm | Turning diameter over slide: 190 mm | Spindle speed: 25 - 2000 rpm. | Speeds: 18 pcs. | Spindle bore: Ø 56.0 mm | Tailstock quill mount MK: DIN 228 / MK 4 | Quill stroke: 150 mm | Bed width: 310 mm | Spindle mount: DIN 55027 / 6 | Feeds - ... » more

used, Sehr gut erhalten , Top Condition | Motorized tailstock | Work load 20 Ton | 3 x closed steady rest | Feeds all directions | Chip conveyor | DBC Turning Length: 12000mm | Swing over bed Ø: 1400mm | Swing over cross slide Ø:800mm | Spindle bore: 105mm | Spindle power: 50kW | Bed width: ... » more

new | Turning length: 1500 mm | Turning diameter: 560 mm | Swing over support: 350 mm | Speed: 25-220/220-1500 rpm | Swing over bed slide: 350 mm | Turning diameter in the crank: 785 mm | Quill travel: 185 mm | Spindle bore: 105.0 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | Pinole ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 23160 € | Leasing rate: 472.46 € | Swing over bed: 400 mm | Distance between centers: 750 mm | Center height: 165 mm | Spindle bore: 32 mm | Swing over cross slide: 190 mm | Bed width: 200 mm | Spindle mount / DIN55027: 5 | Spindle Taper: ... » more

new | Swing over bed: 250 mm | Turning diameter over support: 145 mm | Turning length: 550 mm | Speed: 50 - 2000 rpm / min | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Supply voltage: 230 V | Total power requirement: 0,75 kW | Machine's weight about: 0.12 t | ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 700mm | Swing over cross slide Ø:500mm | DBC Turning Length: 4000mm | Spindle bore: 90mm | Spindle power: 8kW | Bed width: 400mm | Tailstock spindle Ø: 5Ø | Stroke pinole: 80mm | Spindle taper: 185Mk | ... » more

new | Turning length: 1500 mm | Turning diameter: 410 mm | Circumference diameter over bed slide: 255 mm | Swing in the crank: 580 mm | Spindle bore: 52.0 mm | Speed: 30 - 3000 rpm | Bed width: 250 mm | Spindle mount: 55029 D 1-6 | Tailstock taper: MK 4 | Spindle stroke: 120 mm | Total power ... » more

new | Rotating diameter over bed: 660 mm | Swing over support: 420 mm | Turning length: 1500 (2m, 3m, 4m, 5m, 6m) mm | Swing in the crank: 850 mm | Bed width: 560 mm | Spindle nose: 11 | Spindle bore: 103 mm | Gear stages: 3 | Spindle speeds - stepless: 9-55, 37-220, 220-1320 rpm | Thread: 76 steps ... » more

new | Turning diameter over bed: 1320 mm | Swing over support: 940 mm | Turning length: 3000 (1500 to 6000) mm | Spindle bore: 155 mm | Swing in the crank: 1500 mm | Spindle speeds: 5 - 1000 U / min | Metric threads: 0.5 - 480 mm | Thread: 80 steps | Thread - module 0.125 - 120 mm | Thread - inch: ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 5000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 1000 (1500 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1500 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 3000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1000 (1500 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1000 (or 1500, 2000 mm) mm | Spindle bore: 62 mm | Turning diameter in the crank: 670 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: ... » more

used, Sehr gut erhalten , Top Condition | JESSEY - STUDTURN 1440 | Universal lathe Ø 360 x 750 mm | MACH - ID 6364 | Make: JESSEY | Type: STUDTURN 1440 | YOP: 2004 | Swing over bed Ø 360 mm | Swing over cross slide Ø 215 mm | Swing in the gap Ø 560 mm | DBC Turning Length 750 mm | Gap length 150 mm | Spindle bore 42 mm ... » more

demonstration machine, Sehr gut erhalten , Top Condition | MACH-id 5456 | MAKE Weiler Germany | TYPE COMMODOR | YOP 1991 | SPECIFICATIONS | Swing over bed Ø 380 mm | Swing over cross slide Ø 190 mm | Spindle bore 56 mm | Tailstock spindle ⌀4 ⌀ | Speeds / ranges 2000 Rpm | DIMENSIONS | Length ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5226 | MAKE TOS Celakovice CZ | TYPE SU 100 H / 2000 | YOP 2012 | SPECIFICATIONS | Swing over bed Ø 1050 mm | Swing over cross slide Ø 740 mm | Spindle bore 102 mm | Bed width 800 mm | Stroke pinole 350 mm | Spindle ... » more

new | Turning length: 2000 mm | Turning diameter: 560 mm | Swing over support: 350 mm | Speed: 25 - 1500 rpm | Swing over bed slide: 350 mm | Turning diameter in the crank: 785 mm | Pinolenweg: 180 mm | Pinole :: 5 MK | Spindle bore: 105 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | ... » more

used, good | Type: SR 1000 X 5000 | Producer: SKODA | Generated: | parameters: | Turn over bed: 1000 mm | Turning length: 5000 mm » more

used, Sehr gut erhalten , Top Condition | MAKE Geminis Spain | TYPE GE 650 | YEAR 90 er | SPECIFICATIONS | Swing over bed Ø 680 mm | Control Conventionel | Swing over cross slide 410 mm | Swing in the gap Ø 850 mm | Distance between centres 3000 mm | Work piece weight 1000 kg | Spindle bore 104 mm | Spindle ... » more

used | Center height: 330 mm | Distance between centers: 1500 mm | Turning Ø: over bed 690 mm | Spindle bore: 82 mm | Spindle taper: Conical Gr. 8 | Taper tailstock: 6 MK | Spindle speeds: 7.1 to 1400 rpm | Feeds: Longitudinal / transverse from 0.05 to 112 / 0.025 to 56 mm / rev | Thread pitches: ... » more

used, Good Condition | Merk Wagner 3.200 | Type D 1600 / 10.0000 | Jaar 60's / 2000 | 4 bed way heavy duty lathe schwer drehmaschine | Center hoogte (mm) Swing = 3.2000 | Center afstand (mm) Length = 11.000 | Doorlaat (mm) 2 Support | 3 x Steady rest | 4 bed way construction | 4 chuck 3.000 mm » more

used, Sehr gut erhalten , Top Condition | POTISJE - USA 250 | Universal lathe Ø 510 x 2000 mm bore Ø 103 mm | MACH - ID 6226 | Make: POTISJE | Type: USA 250 | YOP: 1997 | Swing over bed Ø 510 mm | Swing over cross slide Ø 320 mm | Swing in the gap Ø 700 mm | DBC Turning Length 2.000 mm | Gap length 255 mm | Spindle ... » more

used, Sehr gut erhalten , Top Condition | MAKE Potisje | TYPE PA 45 DC | YEAR 90 er | SPECIFICATIONS | Swing over bed Ø 910 mm | Control Conventionel turning lathe | Swing over cross slide 600 mm | Swing in the gap Ø 1240 mm | Distance between centres 4000 mm | Work piece weight 5000 kg | Spindle bore 140 mm | ... » more

used, Sehr gut erhalten, Very good Condition | Make Pinacho Taurus | Type 520 x 2000 | Year 2006 | Fagor 80 55 teach in | Centre height (mm) Swing bed = 530 | Center distance (mm) Swing sup = 315 | Spindle bore DBC = 2.000 | Bore = 80 mm | Pinole Mk 5 | 2500 Rpm | www.mach4metal.com » more

used, Sehr gut erhalten, Very good Condition | Make Potisje PA 45 | Type PA 45 AC x 1.000 | Year 1997 | Conventionel lathe LUZ drehmaschine | Centre height (mm) Swing bed = 910 | Center distance (mm) Swing sup = 600 | Spindle bore DBC = 1.000 | Bore = 140 | 3 chuck 630 mm | 4 chuck 800 mm | Steady rest digital readout | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | VDF BOEHRINGER - DUE 800 | Universal lathe Ø 820 x 2000 mm | MACH - ID 6308 | Make: VDF BOEHRINGER | Type: DUE 800 | YOP: 1989 | Swing over bed Ø 820 mm | Swing over cross slide Ø 515 mm | DBC Turning Length 2.000 mm | Spindle bore 128 mm | Spindle power 30 kW | Bed width ... » more

used, received very good for age | Center height: 180 mm | Distance between centers: 1500 mm | Turning Ø: above the bed 380 mm | Spindle bore: 50 mm | Spindle taper: Gr. 6 | Taper tailstock: 5 MK | Turning speed: 33.5 to 1500 rpm | Feeds: longitudinal / face from 0.004 to 1.05 / 0.001 to 0.35 mm / rev | Pitches: from 0.25 to ... » more

new | Turning length: 1000 mm | Turning diameter: 380 mm | Turning diameter in the crank: 490 mm | Spindle bore: 51.0 mm | Speed: 70 - 2000 rev / min | Bed width: 185 mm | Spindle mount: 55029 D 1-5 | Tailstock taper: MK 4 | Spindle stroke: 120 mm | Total power requirement: 1.5 / 2.2 kW | Machine ... » more

used, Very good | L+Z lathe Weiler Commodor *partially overhauled* | Stock number: 04-03-109 | Machine data: | Year of construction: approx. 1999 | L x W x H: approx. 2300 x 1200 x 1800 mm | Weight: approx. 1500 kg | Machine is in very good used condition | Delivery time IMMEDIATELY | Machine partially ... » more

used, good | Inv. Number: 7175 | Type: DECO-2000/13 | Producer: Tornos | Created: 2001 | Parameters: | Control system: FANUC PNC DECO | Max. rod diameter: 13 mm | Number of synchronized axes: 10 pieces | Maximum spindle speed: 10,000 1/min | Length: 2000mm | Width: 1260mm | Height: 1950mm | Weight: 3000kg ... » more

new | Turning diameter: 760 mm | Turning length: 3000 mm | Swing over bed slide: 520 mm | Top height: 380 mm | Speed(s): 17 (7.5 - 1015) rpm | Tailstock: MK6 | Quill stroke: 225 mm | Pinole diameter: 105 mm | Spindle bore: 132 mm | Feed: longitudinal 0.039 - 18 mm/min | Feed: transverse 0.02 - 9 ... » more

new | Swing over bed: 400 mm | Turning diameter over support: 280 mm | Turning length: 1000 mm | Swing in the crank: mm | Speed: 70 - 2000 rev / min | Center height: 195 mm | Spindle bore: 54 mm | Tailstock MK 3 MK | Supply voltage: 400 V | Total power requirement: 2,2 kW | Machine weight approx.: ... » more

used | Technical data: | Center height: 255 mm | Center width: 1450 mm | Spindle bore: 63 mm | Bed width: 385mm | Speeds: (12) 20 - 1100 1/min | Tailstock mount: MK 4 | Quill stroke: 150 mm | Weight, approx.: 2250 kg | Dimensions (LxDxH), approx.: 3100 x 1000 x 1580 mm | Furnishing: | - 2-axis ... » more

used | Turning length: 750 mm | Diameter: 310 mm | Center height: 175 mm | Spindle Bore: 32.0mm | Tailstock MK 3 MK | Speed: 85 - 2200 rpm | Bed width: 200 mm | Spindle mount: DIN 55027 GR 5 | Total power requirement: 2,2 kW | Machine weight approx .: 710 kg | Dimensions L-W-H: 1884 x 717 x 1262 mm » more

new | Condition: New | Country of origin: Bulgaria | Price: 102070 € | Turning diameter over bed: 1090 mm | Distance between centers: 1500 mm | Center height: 500 mm | Spindle bore: 155 mm | Turning diameter over cross slide: 690 mm | Bed width: 700 mm | Spindle mount / DIN55027: 15 | Spindle ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 55600 € | Leasing rate: 1112 € | Swing over bed: 630 mm | Distance between centers: 2000 mm | Center height: 315 mm | Spindle bore: 103 mm | Turning diameter over cross slide: 430 mm | Bed width: 400 mm | Spindle mount / DIN55027: 11 | ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 50600 € | Swing over bed: 600 mm | Distance between centers: 2000 mm | Center height: 300 mm | Spindle bore: 80 mm | Turning diameter over cross slide: 400 mm | Bed width: 400 mm | Spindle mount / DIN55027: 8 | Spindle taper: 90 M | ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 78300 € | Leasing rate: 1566 € | Turning diameter over bed: 760 mm | Distance between centers: 3000 mm | Top height: 380 mm | Spindle bore: 132 mm | Turning diameter over cross slide: 520 mm | Bed width: 560 mm | Spindle mount / DIN55027: ... » more

used | Condition: used | Year built: 1999 | Stock number: 1679 | Delivery time: July 2023, intermediate sale | Country of origin: Taiwan | Price: 14900 € | Diameter above the bed: 460 mm | Distance between centers: 1000 mm | Center height: 230 mm | Spindle bore: 52 mm | Turning diameter over cross ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 108130 € | Turning diameter over bed: 1320 mm | Distance between centers: 1500 mm | Top height: 625 mm | Spindle bore: 155 mm | Turning diameter over cross slide: 940 mm | Bed width: 700 mm | Spindle mount / DIN55027: 15 | Spindle taper: ... » more

new | Diameter: 420 mm | Turning length: 1500 mm | Circumferential diameter over bed slide: 250 mm | Circumferential diameter in the bed bridge: 590 mm | Center height: 210 mm | Turning length in the bed bridge: 260 mm | Speed (s): 16 (45-1800) rpm | Tailstock: MT 4 | Quill stroke: 120 mm | Quill ... » more

new, New machine | Two or three axis digital display optional (Sino, Fagor or Heidenhain) | Turning diameter over bed 402 mm | Turning diameter over support 245 mm | Turning length 1,000 mm | Spindle bore 42 mm | Spindle speeds, three-stage - infinitely variable 40-280 / 280-815 / 815-2300 rpm | Tailstock quill ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 800mm | Swing over cross slide Ø:520mm | Swing in the gap Ø: 870mm | DBC Turning Length: 3000mm | Gap length: 320mm | Spindle bore: 92mm | Spindle power: 15kW | Bed width: 550mm | Tailstock spindle Ø: 110Ø ... » more

used, Sehr gut erhalten , Top Condition | ACU-RITE 2 axis digital read out | HAASE Multi Fix tool holder system |   | Swing over bed Ø: 450mm | Swing over cross slide Ø:260mm | Swing in the gap Ø: 645mm | DBC Turning Length: 1650mm | Gap length: 160mm | Spindle bore: 52mm | Spindle power: ... » more

new | Center height: 205 mm | Swing over bed: 410 mm | Distance between centers: 1000 mm | Bed Width: 260mm | Spindle nose: DIN 55029 (Camlock) 9, size. 6 | Cross slide travel: 220 mm | Travel top slide: 125 mm | Spindle Bore: 52.5mm | Spindle speeds: 20 - 3000 min-1 | Speed control: Stepless | ... » more

new | Image shows MIOTAL® TC 180 x 1000 | Distance between centers: 750 mm | Center height: 165 mm | Swing over bed: Ø 330 mm | Bed width: 190mm | Cross slide travel: 160 mm | Travel top slide: 90 mm | Spindle connection: DIN 55029 (Camlock) D 1 - 4 | Spindle bore: Ø 40 mm | Max. chuck diameter: Ø ... » more

new, very well | Turning diameter over bed 850 mm | Turning diameter over support 510 mm | Turning length 3,000 mm | Travel of the cross slide 600 mm | Travel of the top slide 250 mm | Spindle bore 100 mm | Spindle speed range 5 - 630 rpm | Power of the main drive motor 15 kW | Max. workpiece weight between ... » more

used | Center height: 165 mm | Distance between centers: 750 mm | Spindle bore: 40 mm | Tailstock taper MK: 3 | Weight of the machine ca .: 1150 kg » more

used | Swing over bed: 330 mm | Turning diameter over slide: 190 mm | Distance between centers: 650 mm | Total power requirement: kW | Machine weight ca .: t | Dimensions of the machine ca: m | Turning length: mm » more

new | Rotating diameter over bed: 660 mm | Swing over support: 420 mm | Turning length: 4000 (1.5m,2m,3m,5m,6m) mm | Swing in the crank: 850 mm | Bed width: 560 mm | Spindle nose: 11 | Spindle bore: 103 mm | Gear stages: 3 | Spindle speeds - stepless: 9-55, 37-220, 220-1320 rpm | Thread: 76 steps | ... » more

new | Turning diameter over bed: 1090 mm | Swing over support: 690 mm | Turning length: 6000 mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 - 1 ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 2000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 3000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 2000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 1500 (up to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 - ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 6000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 5000 (1000 - 5000 mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 3000 (1000 - 5000 mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 1000 (1500, 2000- 5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 1500 (1000, 5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Swing over bed: 400 mm | Turning diameter over support: 236 mm | Turning length: 1500 (or 750, 1000) mm | Spindle bore: 52 mm | Turning diameter in the crank: 550 mm | Spindle speeds: (12) 50 - 2240 rpm | Metric threads: 0.25 - 7.5 mm | Thread - inch: 120 - 4 inch. | Thread - Modulus: 0.0625 ... » more

new | Swing over bed: 440 mm | Swing over support: 230 mm | Turning length: 1000 (or 1000, 2000 mm) mm | Spindle bore: 62 mm | Rotating diameter in cranking: 620 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1000 mm | Turning diameter in the crank: 710 mm | Speed: 36 - 1600 rev / min | Center height: 250 mm | Spindle bore: 103 mm | Tailstock MK 5 MK | Tailstock: 150 mm | Tailstock: 75 mm | Total power requirement: ... » more

new | Swing over bed: 250 mm | Swing over support: 130 mm | Turning length: 700 mm | Speed: 115 - 1620 U / min | Center height: 125 mm | Spindle bore: 27 mm | Tailstock MK: 2 | Tailstock quill stroke: 40 mm | Metric threads 0.2 - 3.5 mm | Thread - Customs: 8-56 inches. | Thread - module 0.2 - 12.5 ... » more

used | Power in kVA: 1 kVA » more

used, Sehr gut erhalten , Top Condition | MACH-id 4107 | MAKE HEID | TYPE Dl 1520 | YEAR 1979 | SPECIFICATIONS | Swing over bed Ø 1500 mm | Swing over cross slide 1110 mm | Distance between centres 4000 mm | Work piece weight 10000 kg | Spindle bore 150 mm | Spindle speeds / ranges 140 Rpm ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 1,500 to 6,000 mm | Spindle bore: 155 mm | Swing in the crank: 1050 mm | Spindle speeds - stepless: 10 - 1200 rev / min | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inches: inch. | Whitworth ... » more

new | Swing over bed: 630 mm | Swing over support: 430 mm | Turning length: 1000 to 5000 mm | Spindle bore: 103 mm | Swing in the crank: 830 mm | Spindle speeds - stepless: 20 - 2000 rev / min | Metric threads: 0.5 to 120 | Thread - module 0.125 - 30 mm | Thread - inches: inch. | Whitworth thread: ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1000 to 5000 mm | Spindle bore: 103 mm | Swing in the crank: 700 mm | Spindle speeds: 11.5 - 1400 | Metric threads: 0.5 to 120 | Thread - module 0.125 - 30 mm | Whitworth thread: 0.25 to 60 TPI | Bed width: 400 ... » more

new | Swing over bed: 560 mm | Turning diameter over slide: 310 mm | Turning length: 1500 mm | Spindle bore: 80 mm | Swing in the crank: 780 mm | Spindle speeds - stepless 25 - 1600 rev / min | Metric threads: 47 / 0.2 to 14 mm | Thread - inch 60/2 - 112 inches. | Thread - Module: 39 / 0.1 - 7 mm | ... » more

used, Good Condition | Merk TOS SU 125 H | Type SU 125 Celakovice | Jaar 1996 | Tos Su 125 H Universal conventionel lathe tornio | Center hoogte (mm) Swing = 1.250 | Center afstand (mm) DBC = 2.000 | Doorlaat (mm) Bore = 102 | Speeds = 450 Rpm | 4 chuck 1.250 | 2 steady rest | www.mach4metal.com » more

new | Turning length: 1000 mm | Diameter: 360 mm | Turning diameter in the crank: 480 mm | Spindle bore: 51.0 mm | Speed: 70 - 2000 rev / min | Bed width: 185 mm | Spindle mount: 55029 D 1-5 | Tailstock taper: MK 4 | Pinole way: 110 mm | Total power requirement: 1,5 kW | Machine weight approx .: ... » more

used, Sehr gut erhalten , Very good Condition | Make EST Ticino 710 | Type ET 350 | Year 1986 | Universal turning lathe | Centre height (mm) Swing = 710 | Center distance (mm) DBC = 2000 | Spindle bore Bore = 130 | Philips 2500 Dro | 4 chuck = 600 mm | 3 chuck = 315 mm | * Multific TIPO C * Feeds | www.mach4metal.com » more

used | Turning diameter over bed: 350 mm | Turning diameter over support: 450 mm | Turning length: 1000 mm | Swing in the crank: 450 mm | Speed: 70 - 2000 rev / min | Center height: 175 mm | Spindle bore: 38 mm | Total power requirement: 2,2 kW | Machine weight approx .: 0.55 t | Space requirement ... » more

used | Turning diameter over bed: 500 mm | Turning diameter over slide: 250 mm | Turning length: 1200 mm | Swing in the crank: mm | Speed: 7.1 - 1400 rpm | Center height: 250 mm | Spindle bore: 49 mm | Total power requirement: 7.5 kW | Weight of the machine ca .: 3.9 t | Space requirement approx.: ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 96170 € | Swing over bed: 890 mm | Distance between centers: 1500 mm | Center height: 400 mm | Spindle bore: 155 mm | Turning diameter over cross slide: 490 mm | Bed width: 700 mm | Spindle mount / DIN55027: 15 | Spindle taper: 160 M | ... » more

new | Condition: New | Country of origin: Bulgaria | Price: 37580 € | Leasing rate: 759.12 € | Swing over bed: 400 mm | Distance between centers: 750 mm | Center height: 200 mm | Spindle bore: 52 mm | Turning diameter over cross slide: 235 mm | Bed width: 320 mm | Spindle mount / DIN55027: 6 | ... » more

new | Swing over bed: 250 mm | Turning diameter over support: 145 mm | Turning length: 550 mm | Speed: 50 - 2000 rpm / min | Center height: 125 mm | Spindle bore: 26 mm | Tailstock quill holder MT: 2 MT | Supply voltage: 230 V | Drilling capacity in steel: 16 mm | Projection: 169 mm | Quill stroke: ... » more

used, good | inventory Number : 6522 | Type: BS18-III | Producer: Tsugami Mori | Created: 2000 | parameters: | Control system: Fanuc 18 iTA | Operating hours: 45008 h | On hours: 21537 h | Max. rod diameter: 18 mm | Min rod diameter: 3 mm | Maximum spindle speed: 5000 rpm | Number of all tools: 16 pieces ... » more

used, good | inventory Number : 6521 | Type: Compact A35 | Producer: Kovosvit | Produced: 2005 | parameters: | Control system: Fanuc 16i-TB | Operating hours: 18658 h | On hours: 10202 h | Max. rod diameter: 35 mm | Maximum main spindle power: 7.5 kW | Maximum spindle speed: 7000 rpm | Number of CNC ... » more

used, good | inventory Number : 6520 | Type: Compact A25 | Producer: Kovosvit | Produced: 2008 | parameters: | Control system: Fanuc 16i-TB | Operating hours: 21968 h | On hours: 10127 h | Max. rod diameter: 22 (26) mm | Maximum rod length: 4000 mm | Minimum main spindle speed: 50 rpm | Maximum spindle ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 520mm | Swing over cross slide Ø:315mm | DBC Turning Length: 1200mm | Spindle bore: 62mm | Spindle power: 11kW | Bed width: 360mm | Tailstock spindle Ø: 80Ø | Stroke pinole: 100mm | Spindle taper: 5Mk | ... » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 1900mm | Swing over cross slide Ø:1520mm | DBC Turning Length: 2500mm | Spindle bore: 102mm | Spindle power: 45kW | Tailstock spindle Ø: 130Ø | Stroke pinole: 300mm | Spindle taper: 6Mk | Length: ... » more

used | Turning length: 600 mm | Diameter above the bed: 360 mm | Turning diameter over slide: 190 mm | Bed width: 295 mm | Spindle speed: 45 - 2240 rpm. | Spindle Bore: 33.0mm | Tailstock quill holder MT: MT 3 | Feed: longitudinal 0.02-0.8 mm/rev | Feed: cross 0.0125-0.5 mm/rev | Total power ... » more

used | Swing over bed: 680 mm | Rotation diameter over support: 415 mm | Turning length: 2200 mm | Total power requirement: 22 kW | Machine weight approx .: 6,5 t | Dimensions of the machine ca: m » more

used, Sehr gut erhalten , Top Condition | Swing over bed Ø: 860mm | Swing over cross slide Ø:625mm | Swing in the gap Ø: 1200mm | DBC Turning Length: 3000 to 4750mm | Gap length: 1750mm | Spindle bore: 100mm | Speeds / ranges: 800Rpm | Feed rate X-Axis: 5000mm/min. | Feed rate Z ... » more

new | Turning diameter over bed: 760 mm | Swing over support: 520 mm | Turning length: 4000 (1.5m,2m,3m,5m,6m) mm | Turning diameter in the crank: 950 mm | Bed width: 560 mm | Spindle nose: 11 | Spindle bore: 132 mm | Gear stages: 3 | Spindle speeds - infinitely variable: 12.5-100, 50-415,150-1250 ... » more

new | Diameter above the bed: 860 mm | Swing over support: 620 mm | Turning length: 4000 (1.5m,2m,3m,5m,6m) mm | Swing in the crank: 1050 mm | Bed width: 560 mm | Spindle nose: 11 | Spindle bore: 132 mm | Gear stages: 3 | Spindle speeds - infinitely variable: 12.5-100, 50-415,150-1250 rpm | Thread: ... » more

new | Swing over bed: 630 mm | Swing over support: 430 mm | Turning length: 1000, 1500 - 5000 mm | Spindle bore: 103 mm | Swing in the crank: 830 mm | Offset: 400mm | Spindle speeds - infinitely variable: 15 / 11.5 - 1250 rpm | Metric threads: 0.5 to 120 | Thread - module 0.125 - 30 mm | Thread - ... » more

new | Turning diameter over bed: 1090 mm | Swing over support: 690 mm | Turning length: 1500 (up to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 2000 (1000, 1500 -5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 4000 (1000 - 5000 mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Turning diameter over bed: 1320 mm | Swing over support: 940 mm | Turning length: 1500 (up to 6000) mm | Spindle bore: 155 mm | Swing in the crank: 1500 mm | Spindle speeds: 5 - 1000 U / min | Metric threads: 0.5 - 480 mm | Thread: 80 steps | Thread - module 0.125 - 120 mm | Thread - inch: 60 ... » more

new | Turning diameter over bed: 1090 mm | Swing over support: 690 mm | Turning length: 4000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread ... » more

new | Swing over bed: 890 mm | Swing over support: 490 mm | Turning length: 4000 (1500 to 6000) mm | Spindle bore: 155 mm | Turning diameter in the crank: 1250 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 to 480 | Thread - module 0.125 - 120 mm | Thread - inch: 60 ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 4000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 700 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 4000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 3000 (1000, 1500 -5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 ... » more

new | Turning diameter over bed: 1320 mm | Swing over support: 940 mm | Turning length: 4000 (1500 to 6000) mm | Spindle bore: 155 mm | Swing in the crank: 1500 mm | Spindle speeds: 5 - 1000 U / min | Metric threads: 0.5 - 480 mm | Thread: 80 steps | Thread - module 0.125 - 120 mm | Thread - inch: ... » more

new | Swing over bed: 440 mm | Swing over support: 240 mm | Turning length: 5000 (1000 - 5000mm) mm | Spindle bore: 72 mm | Turning diameter in the crank: 640 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 2000 (or 1000, 1500 mm) mm | Spindle bore: 62 mm | Rotating diameter in cranking: 620 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1500 (or 1000, 2000 mm) mm | Spindle bore: 62 mm | Rotating diameter in cranking: 620 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: ... » more

new | Swing over bed: 400 mm | Turning diameter over support: 236 mm | Turning length: 1000 (or 750, 1500) mm | Spindle bore: 52 mm | Turning diameter in the crank: 550 mm | Spindle speeds: (12) 50 - 2240 rpm | Metric threads: 0.25 - 7.5 mm | Thread - inch: 120 - 4 inch. | Thread - Modulus: 0.0625 ... » more

used, good (used) | LEIT / SPINDLE LATHE - WEILER COMMODOR | 3 - axis digital display | Max. Turning diameter approx. 380mm | Max. Turning diameter over support approx. 190mm | Max. Turning length approx. 1000mm | Bar passage approx. 56mm | Spindle speed approx. 25 - 2000 rpm | Spindle nose: A 2- 6 | 0rhodwvr | ... » more

used | Swing over bed: 490 mm | Turning diameter over support: 280 mm | Turning length: 2000 mm | Center height: 245 mm | Distance between centers: 2000 mm | Spindle bore: 62 mm | Total power requirement: 7.5 kW | Machine weight approx: 3,5 t | Dimensions of the machine L x W x H: 3.78 x 1.17 x 1.42 ... » more

new | Turning length: 2000 mm | Center height: 330 mm | Circumferential diameter over bed slide: 660 mm | Circumferential diameter over slide: 460 mm | Rotating diameter in cranking: 900 mm | Spindle bore: 105 mm | Speed: 25 - 1600 rpm | Bed width: 400 mm | Spindle taper: 55029 D 1-8 | Tailstock ... » more

new | Swing over bed: 410 mm | Swing over support: 240 mm | Turning length: 750 mm | Swing in the crank: mm | Speed: 32 - 2000 rpm | Center height: 210 mm | Spindle bore: 52 mm | Tailstock MK 3 MK | Total power requirement: 2,2 kW | Machine weight approx .: 0.8 t » more

new | Turning diameter over bed: 325 mm | Turning diameter over slide: 190 mm | Turning length: 500, 750, 1000 mm | Spindle bore: 32 mm | Swing diameter in the crimp: 440 mm | Spindle speeds: (12) 85 - 2000 rpm | Metric threads: (48) 0.1-28mm | Thread - Inches: (53) 75-2.5 inches. | Thread module: ... » more

used, Sehr gut erhalten , Top Condition | MACH - ID 6285 | Make: COLCHESTER | Type: TRIUMPH 2500 VS | YOP: 1995 | Swing over bed Ø 400 mm | Swing over cross slide Ø 246 mm | Swing in the gap Ø 585 mm | DBC Turning Length 1.250 mm | Spindle bore 54 mm | Spindle power 7.5 kW | Bed width 318 mm | Spindle taper ... » more

new | Turning diameter over bed: 500 mm | Swing over support: 300 mm | Turning length: 1500 mm | Turning diameter in the crank: 710 mm | Speed: 36 - 1600 rev / min | Center height: 250 mm | Spindle bore: 103 mm | Tailstock MK 5 MK | Tailstock: 150 mm | Tailstock: 75 mm | Total power requirement: ... » more

new | Swing over bed: 630 mm | Swing over support: 360 mm | Turning length: 2000 mm | Speed: 20 - 1120 rpm | Center height: 315 mm | Spindle bore: 105 mm | Tailstock MK 5 MK | Tailstock stroke: 250 mm | Tailstock: 100 mm | Travel distance x: 370 mm | Travel distance - z: 1370 mm | Rapid traverse X ... » more

new | Swing over bed: 330 mm | Swing over support: 178 mm | Turning length: 1000 mm | Swing in the crank: 450 mm | Speed: 70 - 2000 rev / min | Center height: 165 mm | Spindle bore: 38 mm | Tailstock MK: 3 | Total power requirement: 1,1 kW | Machine's weight about 0.5 tonnes | Dimensions approx .: ... » more

used, Sehr gut erhalten , Top Condition | MACH-id 5455 | MAKE Weiler Germany | TYPE Praktikus | YOP 80 er | SPECIFICATIONS | Swing over bed Ø 280 mm | Swing over cross slide Ø 155 mm | Spindle bore 40 mm | Tailstock spindle ⌀ 5 ⌀ | Speeds / ranges 3000 Rpm | DIMENSIONS | Length ... » more

new | Turning length: 3000 mm | Diameter: 660 mm | Rotating diameter in cranking: 900 mm | Turning diameter over support: 460 mm | Speed: 25 - 1600 rpm | Pinole :: 5 MK | Pinolenweg: 235 mm | Spindle bore: 105.0 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | Machine weight approx .: ... » more

new | Turning length: 1000 mm | Diameter: 350 mm | Swing in the crank: 450 mm | Spindle bore: 40.0 mm | Speed: 70 - 2000 rev / min | Bed width: 180 mm | Spindle mount: 55029 D 1-4 | Tailstock cone: 3 MK | Pinole way: 110 mm | Total power requirement: 1,5 kW | Machine weight approx .: 529 kg. | ... » more

used, Sehr gut erhalten , Top Condition | MAKE Cazeneuve France | TYPE OPTICA 590 | YEAR 2009 | SPECIFICATIONS | Swing over bed Ø 583 mm | Control SIEMENS TOUCH | Swing over cross slide 300 mm | Distance between centres 1800 mm | Spindle bore 82 mm | Spindle speeds / ranges 2500 Rpm | Bed width 436 mm | Power ... » more

used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Swing over bed Ø 1400 mm | Control 3 bed way | Swing over cross slide 800 mm | Distance between centres 7000 mm | Work piece weight 10000 kg | Spindle speeds / ranges 1,4 - 18 Rpm | Bed width 1315 mm | www.mach4metal.com » more

used, Top Zustand, Very good Condition | Make VDF DUE 500 | Type DUE Oerlikon Boehringer | Year 1983 | LUZ Drehmaschine | Centre height (mm) Swing bed = 520 | Center distance (mm) DBC = 1000 | Spindle bore Power = 11 kW | www.mach4metal.com » more

used, gut erhalten,good Condition | Make PBR T 700 x 5000 | Type T 700 - 5000 | Year 1990 / 2011 Overhault | Pbr T 700 HeidenHain Digital readout | Centre height (mm) Swing bed = 1.420 | Center distance (mm) Chuck = 1.200 | Spindle bore DBC = 5.000 | Bore = 150 | www.mach4metal.com » more

used, Very good Condition | Merk Tacchi HD1150 | Type HD 1150 | Jaar 1986 | Used heavy duty lathe | Center hoogte (mm) Swing = 1.150 | Center afstand (mm) DBC = 8.000 | Doorlaat (mm) Bore = 220 | Load = 8.000 Kg | Swing over carr. = 850 | Mk 6 / 300 quill / 140 diam. | www.mach4metal.com » more

used, Sehr gut erhalten , Top Condition | Steady rest | Quick change tool holder + insert | CE-Safety chuck protector | DBC Turning Length: 1500mm | Swing over bed Ø: 510mm | Swing over cross slide Ø:270mm | Spindle bore: 62mm | Spindle power: 7.5kW | Speeds / ranges: 710Rpm | Length: ... » more

new | Swing over bed: 400 mm | Turning diameter over support: 264 mm | Turning length: 1000 mm | Turning diameter in the crank: 550 mm | Speed: 44 - 2000 rpm | Center height: 200 mm | Spindle bore: 52 mm | Tailstock mount MK: 4 MK | Supply voltage: 400 V | Total power requirement: 1.5 / 2.4 kW | ... » more

new | Swing over bed: 580 mm | Swing over support: 380 mm | Turning length: 1500 (1000 - 5000mm) mm | Spindle bore: 72 mm | Swing in the crank: 780 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi | Whitworth ... » more

new | Turning diameter over bed: 1320 mm | Swing over support: 940 mm | Turning length: 6000 (1500 to 6000) mm | Spindle bore: 155 mm | Swing in the crank: 1500 mm | Spindle speeds: 5 - 1000 U / min | Thread: 80 steps | Metric threads: 0.5 - 480 mm | Thread - module 0.125 - 120 mm | Thread - inch: ... » more

new | Swing over bed: 440 mm | Swing over support: 230 mm | Turning length: 2000 (or 1000, 1500 mm) mm | Spindle bore: 62 mm | Rotating diameter in cranking: 620 mm | Spindle speeds: (21) 20 - 2000 rpm | Metric threads: 0.5 - 120 mm | Thread - inch: 60 - 1/4 inch. | Thread - Module: 0.125 - 30 Tpi ... » more

new | Swing over bed: 410 mm | Swing over support: 240 mm | Turning length: 1000 mm | Rotating diameter in cranking: 530 mm | Speed: 65 - 1810 rpm | Center height: 205 mm | Spindle bore: 52 mm | Tailstock MK: 4 | Total power requirement: 2,2 kW | Machine weight approx .: 0,9 t | Space requirement: ... » more

new | Swing over bed: 560 mm | Turning diameter over support: 355 mm | Turning length: 2000 mm | Swing in the crank: 790 mm | Speed: 20 - 1800 rpm | Top height: 380 mm | Spindle bore: 80 mm | Tailstock sleeve mount MK: 2,8 MK | Tailstock: 150 mm | Tailstock: 75 mm | Total power requirement: 5.5 kW ... » more

new | Turning length: 1000 mm | Diameter: 360 mm | Swing over bed slide: 220 mm | Turning diameter in the crank: 502 mm | Spindle bore: 52.0 mm | Speed: 70 - 2,000 rpm | Bed width: 185 mm | Spindle mount: 55029 D 1-5 | Tailstock cone: 3 MK | Spindle stroke: 100 mm | Total power requirement: 1.5 / ... » more

new | Turning length: 1000 mm | Turning diameter: 410 mm | Circumference diameter over bed slide: 255 mm | Swing in the crank: 580 mm | Spindle bore: 52.0 mm | Speed: 45 - 1800 r / min | Bed width: 250 mm | Spindle mount: 55029 D 1-6 | Tailstock taper: MK 4 | Spindle stroke: 120 mm | Total power ... » more

new | Turning length: 1500 mm | Turning diameter: 560 mm | Swing over support: 350 mm | Speed: 25 - 1600 rpm | Swing over bed slide: 350 mm | Turning diameter in the crank: 785 mm | Pinolenweg: 180 mm | Spindle bore: 105.0 mm | Motor power: 7.5 kW | Spindle mount: DIN 55029 D 1-8 | Pinole :: 5 MK | ... » more

used, Sehr gut erhalten , Top Condition | SPECIFICATIONS | Swing over bed Ø 530 mm | Control Conventionel | Swing over cross slide 350 mm | Distance between centres 3000 mm | Work piece weight 1000 kg | Spindle bore 105 mm | Spindle speeds / ranges 1500 Rpm | Bed width 350 mm | Power 7.5 Kw | www.mach4metal.com » more